HPD100

H HiTRON UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 100 WATTS SWITCHING MODE POWER SUPPLIES HPD100 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT MEET IEC 61000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS AND INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET EN 55022 CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac universal AC input. Input Connector: Phoenix GMSTBA2.5/3-G-7.62. Input Frequency: 47-63 Hz. Inrush Current: Typ. 25A @230Vac. Input Current: 1.1A @115Vac/ 0.55A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet EN 55022/FCC Class B. Power Factor Correction: Meet Harmonic Correction per IEC 61000-3-2. PF typ. 0.96-0.98. No Load Operation: No damage. Hold-up Time: Typ. 46mS @115Vac & 230Vac. Earth Leakage: Less than 0.70mA @ 230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 100W continuous. Output Connector: Phoenix MSTBA2.5/4-G-5.08. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ±1.0-1.5%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in. Adjustment: Available. LED Indicator: Installed. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 120-130% max. load. Consult the factory for special OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 82%. Switching Frequency: Fixed frq.66.6K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Recovers in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.76 Watts / Cubic inch. Industrial Grade UL 508. Operating Temperature: -10 to +70°C. Derating from +60°C to +70°C by derating 2%/°C. Storage Temperature: -25 to +85°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Free air convection cooling for Ta < +60°C. Moving air is request for Ta > +60°C full load operation. Construction format: Enclosure metal box format with DIN-clips. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -35- OUTPUT VOLTAGE/CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HPD100-S120084 HPD100-S240042 HPD100-S480021 MAIN O/P @★ Typ. 8.4A 4.2A 2.1A Volt. 12.0V 24.0V 48.0V Peak 9.6A 4.8A 2.4A Symbol: "@" Adjustable. "★" OVP built-in. Remark: Peak load less than 60 sec. With duty cycle < 10%. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 670g (23.63 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS AC INPUT ASSIGNMENT AC-L AC-N AC-G P1-3 P1-2 P1-1 CONNECTOR & PIN # Mating connector: P1: Phoenix GMSTB2.5/3-ST-7.62 P2: Phoenix MSTB2.5/4-ST-5.08 SINGLE OUTPUT VO1 DC-COM P2-3, 4 P2-1, 2 -36-