224MS8E

HMC224MS8 / 224MS8E v02.0805 Typical Applications • UNII & HiperLAN The HMC224MS8 / HMC224MS8E is ideal for: • PCMCIA WirelessLAN Functional Diagram ED U IN NT T O SC DUC DI RO P Features Low Cost 5-6 GHz Switch Ultra Small Package: MSOP8 High Input P1dB: +33 dBm Single Positive Supply: +3 to +8V GaAs MMIC T/R SWITCH 5 - 6 GHz w r Ne o ed f Description d General men om The HMC224MS8 & HMC224MS8E are low-cost Rec SPDT switches in 8-lead MSOP packages for use in t No transmit-receive applications. The device can control signals from 5.0 to 6.0 GHz and is especially suited for 5.2 GHz UNII and 5.8 GHz ISM applications with only 1.2 dB loss. The design provides exceptional power handling performance; input P1dB = +33 dBm at 5 Volt bias. RF1 and RF2 are reflective shorts when “Off”. On-chip circuitry allows single positive supply operation at very low DC current with control inputs compatible with CMOS and most TTL logic families. No DC blocking capacitors are required on RF I/O ports. s sign De 11 SWITCHES - SPDT T/R - SMT Electrical Specifi cations, TA = +25° C, Vdd = +5 Vdc, 50 Ohm System Parameter Insertion Loss Frequency 5.0 - 6.0 GHz 5.1 - 5.4 GHz 5.4 - 5.9 GHz 5.0 - 6.0 GHz 5.1 - 5.4 GHz 5.4 - 5.9 GHz RF Common Return Loss RF1 & RF2 0/3V Control 0/5V Control 0/3V Control 0/5V Control 5.0 - 6.0 GHz 5.1 - 5.9 GHz 5.0 - 6.0 GHz 5.1 - 5.9 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 25 ns ns 20 26 22 11 12 11 11 27 29 31 33 Min. Typ. 1.3 1.2 1.3 24 31 27 15 16 14 15 31 33 35 37 Max. 1.6 1.5 1.6 Units dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm Isolation Input Power for 1 dB Compression Input Third Order Intercept Switching Characteristics 11 - 2 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC224MS8 / 224MS8E v02.0805 Insertion Loss 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 -3.5 -4 4 ED U IN NT T O SC DUC DI RO P Isolation 0 -10 ISOLATION (dB) -20 GaAs MMIC T/R SWITCH 5 - 6 GHz 5 6 FREQUENCY (GHz) w r Ne o ed f d men om Rec Not -30 -40 s sign De 6 7 7 8 4 5 8 FREQUENCY (GHz) Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 4 5 6 FREQUENCY (GHz) 7 8 S11 RFC S22 Absolute Maximum Ratings Bias Voltage Range (Vdd) Control Voltage Range (A & B) Storage Temperature Operating Temperature -0.2 to +12 Vdc -0.2 to Vdd Vdc -65 to +150 °C -40 to +85 °C 11 SWITCHES - SPDT T/R - SMT 11 - 3 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Truth Table *Control Input Voltage Tolerances are ± 0.2 Vdc. Bias Vdd (Vdc) 3 3 3 5 5 5 A (Vdc) 0 0 Vdd 0 0 Vdd Control Input* B (Vdc) 0 Vdd 0 0 Vdd 0 Bias Current Idd (uA) 10 10 10 45 45 115 Control Current Ia (uA) -5 -10 0 -22 -5 -40 Control Current Ib (uA) -5 0 -10 -23 -40 -5 Signal Path State RF to RF1 OFF ON OFF OFF ON OFF RF to RF2 OFF OFF ON OFF OFF ON Caution: Do not operate in 1dB compression at power levels above +33 dBm and do not “hot switch” power levels greater than +23 dBm (Vdd = +5Vdc). DC blocks are not required at ports RFC, RF1 and RF2. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC224MS8 / 224MS8E v02.0805 Outline Drawing ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not NOTES: GaAs MMIC T/R SWITCH 5 - 6 GHz s sign De 1. LEADFRAME MATERIAL: COPPER ALLOY 11 SWITCHES - SPDT T/R - SMT Package Information Part Number HMC224MS8 HMC224MS8E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H224 XXXX H224 XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Typical Application Circuit Notes: 1. Control Inputs A and B can be driven directly with CMOS logic (HC) with V of 3 to 8 Volts applied to the CMOS logic gates and to pin 4 of the RF switch. Set V to 5 Volts and use HCT series logic to provide a TTL driver interface. Highest RF signal power capability is achieved with V set to +10V. However, the switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. RF ByPass: Do not use RF bypass capacitors on Vdd, A or B ports. Resistors R1, R2, R3 = 100 Ohms should be placed close to the Vdd, A and B ports. Use resistor size 0402 to minimize parasitic inductances and capacitances. DC Blocking capacitors are not required for each RF port. Evaluation PCB available. 2. 3. 4. 5. 6. 11 - 4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC224MS8 / 224MS8E v02.0805 Evaluation PCB ED U IN NT T O SC DUC DI RO P w r Ne o ed f d men om Rec Not s sign De GaAs MMIC T/R SWITCH 5 - 6 GHz 11 SWITCHES - SPDT T/R - SMT 11 - 5 List of Materials for Evaluation PCB 104771 [1] Item J1 - J3 J4 - J7 R1, R3 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100  resistor, 0402 Pkg. HMC224MS8 / HMC224MS8E T/R Switch 104518 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com