TMCH

TANTALUM ELECTROLYTIC CAPACITORS TMCH Series (High Reliability Tantalum Chip Capacitors) Product specifications TMCH P case and the other (Bold - type indication) Test conditions JIS C5101-1:1998 Features • A moulded type chip capacitor developed on the basis of TMC production technology especially for car electronics applications. Also usable for use in office automation and other computer-based equipment which is required to offer high reliability. • High heat resistance and high reliability: Improved over the predecessor in high-temperature (125°C) reliability, moisture resistance, and temperature cycling test resistance. Operating temperature range –55°C ~ +125°C Rated voltage Surge voltage Derated voltage DC4 ~ 35V DC5 ~ 45V DC2.5 ~ 22V 85°C 85°C 125°C Capacitance 0.1 ~ 100µF Capacitance tolerance ±10% or 20% Paragraph 4.7, 120 Hz Paragraph 4.9, in 5 minutes after the rated voltage is applied. Paragraph 4.8, 120Hz Leakage current Refer to Standard product table tanδ Refer to Standard product table △C/C ±5% or less Surge withstanding voltage tanδ Specified initial value or less LC △C/C − 0.04 Product symbol : (Example) TMCH Series A case 16V 1µF ±20% △C/C ±10% or less tanδ Specified initial value or less Paragraph 4.26 LC − TMCH A 1C 105 M T R F Terminal code Packing polarity code Packing method code (T:carrier tape) Capacitance tolerance code (M : ±20%) Capacitance code Rated voltage code Case size code Specified initial value or less 85 125 0.05 Specified initial value or less Specified initial value −55 85 125 −20∼0％ 0∼＋10％ 0∼＋12％ Specified initial value −55 tanδ Value shown table or less LC −10∼0％ 0∼＋10％ 0∼＋12％ △C/C 0.04 0.05 Type of series Temperature characteristics Outline of drawings and dimensions Anode indication belf mark L tanδ 0.06 0.10 0.08 0.10 0.06 0.06 0.07 0.07 Value 0.08 0.10 0.10 0.12 shown 0.08 0.08 0.10 0.12 table or less 0.005CV − 0.05CV 0.125CV 0.005CV − 0.05CV 0.125CV or or or or or or LC 0.25µA 2.5µA 3.12µA 0.25µA 2.5µA 3.12µA or less or less or less or less or less or less Paragraph 4.24 △C/C ±5% or less Solder heat resistance W △C/C ±5% or less tanδ Specified initial value or less LC Specified initial value or less tanδ Specified initial value or less LC Specified initial value or less Solder Dip A, B case 10±1 sec. Reflow–260°C 260±5°C C, E case 5±0.5 sec. 10±1 sec. Moisture resistance no load E case a W a A,B, C case a △C/C ±5% or less tanδ 150% Specified initial value or less 200% Specified LC initial value or less △C/C ±10% or less tanδ Specified initial value or less LC 125% Specified initial value or less △C/C ±5% or less tanδ Specified initial value or less LC 200% Specified initial value or less △C/C ±5% or less tanδ 150% Specified initial value or less 200% Specified LC initial value or less △C/C ±10% or less tanδ 150% Specified initial value or less LC 200% Specified initial value or less △C/C ±10% or less tanδ 200% Specified initial value or less LC 500% Specified initial value or less △C/C ±20% or less tanδ Specified initial value or less 125% Specified LC initial value or less △C/C ±20% or less tanδ Specified initial value or less LC 200% Specified initial value or less △C/C ±12% or less tanδ 200% Specified initial value or less LC 500% Specified initial value or less △C/C ±10% or less tanδ 200% Specified initial value or less LC 500% Specified initial value or less H Paragraph 4.22, 85°C 85%RH,1000hrs Paragraph 4.23, 85°C The rated voltage is applied for 2000 hours. Leave at -55°C, normal temperature, 125°C, and normal temperature for 30 min., 3 min., 30 min., and 3 min. Repeat this operation 1000 times running. 65°C, humidity 90 to 95%RH The rated voltage is applied for 500 hrs. High-temperature load ※Please see the page of TMCP Series, about details information of P case. Dimensions Case code P A B C E L±0.2 2.0 3.2 3.5 5.8 7.3 W±0.2 1.25 1.6 2.8 3.2 4.3±0.3 Case size H±0.2 1.2 1.6 1.9 2.5 2.8 (Unit : mm) Thermal shock R±0.3 0.5 0.7 0.8 1.3 1.3 a±0.2 0.9 1.2 2.2 2.2 2.4 Moisture resistance load Standard value and case size Capacitance µF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Code 104 154 224 334 474 684 105 155 225 335 475 685 106 156 226 336 476 686 107 4 0G 7 0J Rated voltage (V.DC) 10 16 20 25 1A 1C 1D 1E P P P P,A A A A,B A,B B B,C C C,E C,E C,E A A A A,B B B B,C C C,E E E A A   B B B B,C C C,E E E A A   B B   C C E E A A A P,A,B P,B B B,C C C,E E E P,A P,A P,A P,A,B B A,B B,C C C,E C,E C,E 35 1V A A A A A,B A,B A,B B,C B,C B,C C,E C,E E E High temperature load (At 150˚C with no load) Failure rate 0.5% / 1000hrs 0.5% / 1000hrs 85°C. The rated voltage is applied (through a protective resistor of 1 Ω/V). ※This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. （ ）brackets ; in development. 147 Hitachi AIC Inc. TANTALUM ELECTROLYTIC CAPACITORS Standard product tables - TMCH series Standard product table - TMCH series Rated voltage Capacitance V. DC µF 4 3.3 4.7 10 15 33 47 68 100 7（6.3） 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 10 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 16 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 20 0.33 0.68 1.0 1.5 2.2 3.3 4.7 tanδ 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.08 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.04 0.06 0.08 0.06 0.08 0.06 0.08 0.06 0.08 0.06 0.06 0.06 0.08 0.06 0.06 0.06 0.06 0.06 0.06 0.08 0.06 0.08 0.08 0.06 0.06 0.06 0.04 0.06 0.06 0.08 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.08 0.06 0.08 0.08 0.06 0.04 0.04 0.06 0.06 0.06 0.06 0.06 Leakage current µA 0.25 0.25 0.25 0.30 0.66 0.94 1.36 2.00 0.25 0.25 0.25 0.25 0.25 0.25 0.31 0.35 0.52 0.77 0.77 1.15 1.64 1.64 2.38 3.50 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.34 0.50 0.50 0.75 0.75 1.10 1.65 1.65 2.35 2.35 3.40 3.40 0.25 0.25 0.25 0.25 0.25 0.25 0.26 0.26 0.26 0.37 0.37 0.54 0.80 0.80 1.20 1.76 1.76 2.64 2.64 3.76 3.76 0.25 0.25 0.25 0.25 0.25 0.25 0.33 0.47 Case code A A B B C C E E A A A P A B P B B B C C C E E E P A P A P A P A B B A B B C C C E C E C E P P P A A A P A B A B B B C C C E C E C E P A A A A B B B Product name TMCHA0G335 TMCHA0G475 TMCHB0G106 TMCHB0G156 TMCHC0G336 TMCHC0G476 TMCHE0G686 TMCHE0G107 TMCHA0J225 TMCHA0J335 TMCHA0J475 TMCHP0J685 TMCHA0J685 TMCHB0J685 TMCHP0J106 TMCHB0J106 TMCHB0J156 TMCHB0J226 TMCHC0J226 TMCHC0J336 TMCHC0J476 TMCHE0J476 TMCHE0J686 TMCHE0J107 TMCHP1A155 TMCHA1A155 TMCHP1A225 TMCHA1A225 TMCHP1A335 TMCHA1A335 TMCHP1A475 TMCHA1A475 TMCHB1A475 TMCHB1A685 TMCHA1A106 TMCHB1A106 TMCHB1A156 TMCHC1A156 TMCHC1A226 TMCHC1A336 TMCHE1A336 TMCHC1A476 TMCHE1A476 TMCHC1A686 TMCHE1A686 TMCHP1C474 TMCHP1C684 TMCHP1C105 TMCHA1C105 TMCHA1C155 TMCHA1C225 TMCHP1C335 TMCHA1C335 TMCHB1C335 TMCHA1C475 TMCHB1C475 TMCHB1C685 TMCHB1C106 TMCHC1C106 TMCHC1C156 TMCHC1C226 TMCHE1C226 TMCHC1C336 TMCHE1C336 TMCHC1C476 TMCHE1C476 TMCHP1D334 TMCHA1D684 TMCHA1D105 TMCHA1D155 TMCHA1D225 TMCHB1D225 TMCHB1D335 TMCHB1D475 Rated voltage Capacitance V. DC µF 20 6.8 10 15 22 33 0.47 0.68 1.5 2.2 3.3 4.7 6.8 10 15 22 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 tanδ 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.04 0.04 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Leakage current µA 0.68 0.68 1.00 1.50 1.50 2.20 3.30 0.25 0.25 0.25 0.27 0.41 0.58 0.58 0.85 1.25 1.25 1.87 2.75 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.26 0.26 0.38 0.38 0.57 0.57 0.82 0.82 1.19 1.19 1.75 2.62 Case code B C C C E E E A A B B B B C C C E E E A A A A A B A B A B B C B C B C C E C E E E Product name TMCHB1D685 TMCHC1D685 TMCHC1D106 TMCHC1D156 TMCHE1D156 TMCHE1D226 TMCHE1D336 TMCHA1E474 TMCHA1E684 TMCHB1E155 TMCHB1E225 TMCHB1E335 TMCHB1E475 TMCHC1E475 TMCHC1E685 TMCHC1E106 TMCHE1E106 TMCHE1E156 TMCHE1E226 TMCHA1V104 TMCHA1V154 TMCHA1V224 TMCHA1V334 TMCHA1V474 TMCHB1V474 TMCHA1V684 TMCHB1V684 TMCHA1V105 TMCHB1V105 TMCHB1V155 TMCHC1V155 TMCHB1V225 TMCHC1V225 TMCHB1V335 TMCHC1V335 TMCHC1V475 TMCHE1V475 TMCHC1V685 TMCHE1V685 TMCHE1V106 TMCHE1V156 25 35 Marking indication 16V1µF A, B case A case A6A Simplified code of nominal capacitance (A6 : 1µF) Lot indication (A:for manufacturing in January, 2009) 20V1µF A case DA6A Anode indication belt mark Simplified code of rated voltage (D : 20V) ∗When the capacitance code is the same in the same case, use the voltage code for the higher rated voltage. C, E case ② ① 10 16A ③④ ①Anode indication belt mark ②Nominal capacitance Volue (10µF) ③Rated voltage (16V) ④Lot indication (A:for manufacturing in January, 2009) ①Anode indication belt mark P case 10V4.7µF ① AS ②③ ②Simplified code of rated voltage (A : 10V) ③Simplified code of nominal capacitance(S:4.7µ) Lot indication Month Year 1 A N a n 2 B P b p 3 C Q c q 4 D R d r 5 E S e s 6 F T f t 7 G U g u 8 H V h v 9 J W j w 10 K X k x 11 L Y l y 12 M Z m z 2009 2010 2011 2012 Hitachi AIC Inc. 148