HFX7000-200

HFX7000-200 Fiber Optic Component 50 Mbps, 650 nm LED DESCRIPTION The HFX7000-200 is a 50 Mbps LED designed to meet data easily mounted on the PCB while also offering improved transmission requirements in factory or office automation. The mechanical robustness and EMC protection versus plastic 650 nm wavelength provides operation in the low attenuation packages. The HFX7000-200 is designed to work with area of PMMA (Polymethylmethacrylat) fibers. The metal SMA Honeywell’s high speed receivers HFX7000-XXX and housing gives the user a cost-effective module which can be HFD7500-XXX, and is pin compatible with Honeywell’s HFX6015-200. FEATURES POTENTIAL APPLICATIONS • Super bright LED for optical fiber communication • Data transmission in factory automation and office • Integrated lens provides maximum coupling into plastic • High speed and short distance links fibers • High power output at 650 nm • High speed (50 Mbps) • High reliability • Designed to meet SERCOS requirement HFX7000-200 ABSOLUTE MAXIMUM RATINGS1 Parameter Symbol Rating Forward current If 40 mA Reverse voltage VR 5V Power dissipation* PMAX 250 mW Soldering temperature TSOLD 250 °C for 5 seconds Operating temperature TOP -40 °C to 85 °C [-40 °F to 185 °F] TSTOR -40 °C to 85 °C [-40 °F to 185 °F] Storage temperature Notes: * Derate power dissipation at a rate of 1.7 mW/°C above TA = 25 °C [77 °F] ELECTRO-OPTICAL CHARACTERISTICS (TA = 25 °C [77 °F]) Parameter Condition Symbol Minimum Data rate Driven by recommended circuit fD DC Forward voltage If = 20 mA Vf Reverse current Vr = 5 V Ir Output power If = 10 mA Po If = 20 mA Po If = 20 mA λp 350 nm If = 20 mA ∆λ 20 nm Rise time If = 20 mA tr 8 ns Fall time2 If = 20 mA tr 8 ns Peak wavelength 1 Spectral halfwidth 2 Typical 1.9 Maximum Unit 50 Mbps 2.3 V 10 µA -7 (200) -4 (400) dBm (µW) -5 (315) -1 (795) dBm (µW) 1 Output from a 1 m long, 1 mm diameter plastic fiber (GH4001 made by Mitsubishi Rayon). Measured with recommended drive circuit. 2 Time required for change in the output as shown below. Measured with recommended drive circuit (Figure 4) TYPICAL OUTPUT WAVEFORM (TA = 25 °C [77 °F], If = 20 mA, 5ns/div ORDER GUIDE Catalog listing Description HFX7000-200 650 nm LED in metal SMA-housing 2 www.honeywell.com/sensing RISE/FALL TIME 50 Mbps, 650 nm LED FIGURE 1. TYPICAL LIGHT OUTPUT VS. LED CURRENT FIGURE 3. TYPICAL LIGHT OUTPUT VS. TEMP FIGURE 2. TYPICAL EMISSION SPECTRUM FIGURE 4. RECOMMENDED DRIVE CIRCUIT NOTICE The inherent design of this component causes it to be sensitive electrostatic discharge (ESD). To prevent ESDincluded damage and/or degredation to equipment, take normal ESD precautions when handling this product. Honeywell Sensing and Control 3 HFX7000-200 OUTPUT POWER VS. FORWARD CURRENT Condition: POF 1 m, TA = 25°C [77 °F] OUTPUT POWER VS. FORWARD CURRENT TEMPERATURE CHARACTERISTICS Condition: POF 1 m FORWARD VOLTAGE VS. FORWARD CURRENT TA = 25°C [77 °F] FORWARD VOLTAGE VS. FORWARD CURRENT TEMPERATURE CHARACTERISTIC 4 www.honeywell.com/sensing 50 Mbps, 650 nm LED ABSOLUTE MAXIMUM RATING PINOUT Maximum forward current (whole temperature range) MTTF VALUE The estimation of MTTF (the average time down to 50% from the initial value) is as follows: Condition If = 1 mA TA = 25 °C [77 °F] TA = 45 °C [113 °F] TA = 70 °C [158 °F] TA = 85 °C [185 °F] 6.1 x 108 1.1 x 108 1.7 x 107 6.4 x 106 7 6 6 If = 10mA 3.8 x 10 7.4 x 10 1.2 x 10 4.7 x 105 If = 20 mA 1.2 x 107 2.4 x 106 4.2 x 105 1.7 x 105 If = 30 mA 4.9 x 106 1.0 x 106 1.9 x 105 7.9 x 104 If = 40 mA 6 – – – 2.3 x 10 DIMENSIONS Honeywell Sensing and Control 5 WARNING WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. NOTICE Stress greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 00XXXXX-1-EN IL50 GLO Printed in USA April 2007 © 2007 Honeywell International Inc. All rights reserved..