LM78L05

3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR FEATURES LM78LXX TO-92 PKG      Output Current Up to 100mA No External Components Internal Thermal Overload Protection Internal Short-Circuit Limiting Output Voltage of 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V and 24V  Moisture Sensitivity Level 3 SOT-89 PKG DESCRIPSION This series of fixed-voltage monolithic integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high current voltage regulators. Each of these regulators can deliver up to 100mA of output current. The internal limiting and thermal shutdown features of these regulators make them essentially immune to overload. Current limiting is include to limit the peak output current(250mA ~ 300mA) to a safe value. When used as a replacement for a zener diode-resistor combination, an effective improvement in output impedance can be obtained together with lower-bias current. SOP-8 PKG ORDERING INFORMATION Device Package LM78LXX TO-92 (Bulk) LM78LXXTA TO-92 (Taping) LM78LXXF SOT-89 LM78LXXD SOP-8 XX : Output Voltage = 05, 06, 08, 09, 10, 12, 15, 18, 24 Absolute Maximum Ratings CHARACTERISTIC SYMBOL LM78L05 ~ LM78L10 Input Voltage LM78L12 ~ LM78L18 VIN LM78L24 MIN. MAX. - 30 - 35 - 40 UNIT V Maximum Power Dissipation at TA = 25°C / TO-92 PDMax - 0.770 W Thermal Resistance Junction-To-Ambient / TO-92 θJA - 162 ℃/W Lead Temperature (Soldering, 10 sec) TSOL - 260 ℃ Storage Temperature Range TSTG -65 150 ℃ Operating Junction Temperature Range TJOPR -40 150 ℃ Oct. 2013 - Rev. 1.5.1 -1 - HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX Recommended Operating Conditions CHARACTERISTIC Input Voltage SYMBOL MIN. MAX. LM78L05 / A 7 20 LM78L06 8 20 LM78L08 10.5 23 LM78L09 11.5 24 12.5 25 LM78L12 14.5 27 LM78L15 17.5 30 LM78L18 20.5 33 LM78L24 26.5 39 LM78L10 VIN UNIT V Output Current Io 100 100 mA Operating Virtual Junction Temperature TJ -40 125 ℃ Ordering Information VOUT Package Order No. Description Supplied As Status LM78L05 0.1A, Positive Bulk Active LM78L05A 0.1A, Positive Bulk Active LM78L05TA 0.1A, Positive Taping Active LM78L05ATA 0.1A, Positive Taping Active SOT-89 LM78L05F 0.1A, Positive Reel Active SOP-8 LM78L05D 0.1A, Positive Reel Active LM78L06 0.1A, Positive Bulk Active LM78L06TA 0.1A, Positive Taping Active LM78L06F 0.1A, Positive Reel Active LM78L08 0.1A, Positive Bulk Active LM78L08TA 0.1A, Positive Taping Active LM78L08F 0.1A, Positive Reel Active LM78L09 0.1A, Positive Bulk Active LM78L09TA 0.1A, Positive Taping Active LM78L09F 0.1A, Positive Reel Active TO-92 5.0V TO-92 6.0V SOT-89 TO-92 8.0V SOT-89 TO-92 9.0V SOT-89 Oct. 2013 - Rev. 1.5.1 -2 - HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX Ordering Information (Continued) VOUT Package Order No. Description Supplied As Status LM78L10 0.1A, Positive Bulk Active LM78L10TA 0.1A, Positive Taping Active LM78L10F 0.1A, Positive Reel Active LM78L12 0.1A, Positive Bulk Active LM78L12TA 0.1A, Positive Taping Active LM78L12F 0.1A, Positive Reel Active LM78L15 0.1A, Positive Bulk Active LM78L15TA 0.1A, Positive Taping Active LM78L15F 0.1A, Positive Reel Active LM78L18 0.1A, Positive Bulk Active LM78L18TA 0.1A, Positive Taping Active LM78L18F 0.1A, Positive Reel Active LM78L24 0.1A, Positive Bulk Active LM78L24TA 0.1A, Positive Taping Active LM78L24F 0.1A, Positive Reel Active TO-92 10V SOT-89 TO-92 12V SOT-89 TO-92 15V SOT-89 TO-92 18V SOT-89 TO-92 24V SOT-89 LM 78L XX Package Type Blank TA F D : TO-92 (Bulk) : TO-92 (Taping) : SOT-89 : SOP-8 Blank : 4 % A :2% Tolerance Output Voltage (V) : 05 / 06 / 08 / 09/ 10 / 12 / 15 / 18 / 24 Root Name Product Code Oct. 2013 - Rev. 1.5.1 -3 - HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX PIN CONFIGURATION 1. VOUT 8. VIN 2. GND 7. GND 3. GND 6. GND 4. N.C 5. N.C 1. VOUT 2. GND 3. VIN 1. VOUT 2. GND 3. VIN TO-92 SOT-89 SOP-8 PIN DESCRIPTION TO-92 / SOT-89 3 LEAD SOP-8 8 LEAD Pin No. Name Function Name Function 1 VOUT Output Voltage VOUT Output Voltage 2 GND Ground GND Ground 3 VIN Input Voltage GND Ground 4/5 - - N.C Not Connected 6/7 - - GND Ground 8 - - VIN Input Voltage TYPICAL APPLICATION LM78LXX INPUT OUTPUT (Note 1) 0.33uF + + 0.1uF (Note 2) (Note 2) Note) 1. To specify an output voltage, substitute voltage for "XX". 2. Bypass capacitors are recommended for optimum stability and transient response and should be located as close as possible to the regulators. Oct. 2013 - Rev. 1.5.1 -4 - HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX ELECTRICAL CHARACTERISTICS LM78L05 (At specified virtual junction temperature, VIN = 10V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 7V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 4.8 5 5.2 -30℃ ~ 125℃ 4.75 5 5.25 4.75 5 5.25 32 150 26 100 15 60 8 30 3.8 6 7V ≤ VIN ≤ 20V 25℃ 8V ≤ VIN ≤ 20V 25℃ mV 25℃ Bias Current IB Bias Current Change ΔIB V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT mA 9V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 8V ≤ VIN ≤ 18V, f=120Hz 25℃ Dropout Voltage VD mA 0.1 41 25℃ 42 uV 49 dB 1.7 V LM78L05A (At specified virtual junction temperature, VIN = 10V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 7V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 4.9 5 5.1 -30℃ ~ 125℃ 4.875 5 5.125 4.875 5 5.125 32 150 26 100 15 60 8 30 3.8 6 7V ≤ VIN ≤ 20V 25℃ 8V ≤ VIN ≤ 20V 25℃ mV 25℃ Bias Current Bias Current Change IB ΔIB mA 9V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 8V ≤ VIN ≤ 18V, f=120Hz 25℃ Dropout Voltage VD Oct. 2013 - Rev. 1.5.1 V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT 25℃ -5 - mA 0.1 41 42 uV 49 dB 1.7 V HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX LM78L06 (At specified virtual junction temperature, VIN = 11V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 8V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 5.75 6 6.25 -30℃ ~ 125℃ 5.7 6 6.3 5.7 6 6.3 35 175 29 125 16 80 9 40 3.9 6 8V ≤ VIN ≤ 20V 25℃ 9V ≤ VIN ≤ 20V 25℃ mV 25℃ Bias Current IB Bias Current Change ΔIB V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT mA 9V ≤ VIN ≤ 20V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 8V ≤ VIN ≤ 18V, f=120Hz 25℃ Dropout Voltage VD mA 0.1 40 25℃ 46 uV 48 dB 1.7 V LM78L08 (At specified virtual junction temperature, VIN = 14V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 10.5V ≤ VIN ≤ 23V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 7.7 8 8.3 -30℃ ~ 125℃ 7.6 8 8.4 7.6 8 8.4 42 175 36 125 18 80 10 40 4 6 10.5V ≤ VIN ≤ 23V 25℃ 11V ≤ VIN ≤ 23V 25℃ mV 25℃ Bias Current Bias Current Change IB ΔIB mA 11V ≤ VIN ≤ 23V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 13V ≤ VIN ≤ 23V, f=120Hz 25℃ Dropout Voltage VD Output Noise Voltage Oct. 2013 - Rev. 1.5.1 V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT 25℃ -6 - mA 0.1 37 54 uV 46 dB 1.7 V HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX LM78L09 (At specified virtual junction temperature, VIN = 16V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 12V ≤ VIN ≤ 24V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 8.6 9 9.4 -30℃ ~ 125℃ 8.55 9 9.45 8.55 9 9.45 45 175 40 125 19 90 11 40 4.1 6 12V ≤ VIN ≤ 24V 25℃ 13V ≤ VIN ≤ 24V 25℃ mV 25℃ Bias Current IB Bias Current Change ΔIB V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT mA 13V ≤ VIN ≤ 24V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 15V ≤ VIN ≤ 25V, f=120Hz 25℃ Dropout Voltage VD mA 0.1 38 25℃ 58 uV 45 dB 1.7 V LM78L10 (At specified virtual junction temperature, VIN = 17V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 13V ≤ VIN ≤ 25V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 9.6 10 10.4 -30℃ ~ 125℃ 9.5 10 10.5 9.5 10 10.5 51 175 42 125 20 90 11 40 4.2 6 13V ≤ VIN ≤ 25V 25℃ 14V ≤ VIN ≤ 25V 25℃ mV 25℃ Bias Current Bias Current Change IB ΔIB mA 14V ≤ VIN ≤ 25V 1mA ≤ Io ≤ 40mA 125℃ 5.5 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 15V ≤ VIN ≤ 25V, f=120Hz 25℃ Dropout Voltage VD Oct. 2013 - Rev. 1.5.1 V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT 25℃ -7 - mA 0.1 37 62 uV 44 dB 1.7 V HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX LM78L12 (At specified virtual junction temperature, VIN = 19V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 14V ≤ VIN ≤ 27V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 11.5 12 12.5 -30℃ ~ 125℃ 11.4 12 12.6 11.4 12 12.6 55 250 49 200 22 100 13 50 4.3 6.5 14.5V ≤ VIN ≤ 27V 25℃ 16V ≤ VIN ≤ 27V 25℃ mV 25℃ Bias Current IB Bias Current Change ΔIB V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT mA 16V ≤ VIN ≤ 27V 1mA ≤ Io ≤ 40mA 125℃ 6 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 15V ≤ VIN ≤ 25V, f=120Hz 25℃ Dropout Voltage VD mA 0.1 37 25℃ 70 uV 42 dB 1.7 V LM78L15 (At specified virtual junction temperature, VIN = 23V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 17.5V ≤ VIN ≤ 30V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 14.4 15 15.6 -30℃ ~ 125℃ 14.25 15 15.75 14.25 15 15.75 65 300 58 250 25 150 15 75 4.2 6.5 17.5V ≤ VIN ≤ 30V 25℃ 19V ≤ VIN ≤ 30V 25℃ mV 25℃ Bias Current Bias Current Change IB ΔIB mA 19V ≤ VIN ≤ 30V 1mA ≤ Io ≤ 40mA 125℃ 6 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 18.5V ≤ VIN ≤ 28.5V, f=120Hz 25℃ Dropout Voltage VD Oct. 2013 - Rev. 1.5.1 V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT 25℃ -8 - mA 0.1 37 82 uV 44 dB 1.7 V HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX LM78L18 (At specified virtual junction temperature, VIN = 26V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 20.5V ≤ VIN ≤ 33V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 17.3 18 18.7 -30℃ ~ 125℃ 17.1 18 18.9 17.1 18 18.9 70 360 64 300 27 180 19 90 4.7 6.5 20.5V ≤ VIN ≤ 33V 25℃ 22V ≤ VIN ≤ 33V 25℃ mV 25℃ Bias Current IB Bias Current Change ΔIB V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT mA 22V ≤ VIN ≤ 33V 1mA ≤ Io ≤ 40mA 125℃ 6 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 21.5V ≤ VIN ≤ 31.5V, f=120Hz 25℃ Dropout Voltage VD mA 0.1 32 25℃ 82 uV 36 dB 1.7 V LM78L24 (At specified virtual junction temperature, VIN = 32V, Io = 40mA (Unless otherwise noted) PARAMETER Output Voltage (Note 2) SYMBOL VOUT (Note 1) TEST CONDITION 1mA ≤ Io ≤ 40mA 26.5V ≤ VIN ≤ 39V 1mA ≤ Io ≤ 70mA Line Regulation Load Regulation ΔVLINE ΔVLOAD MIN. TYP. MAX. 25℃ 23 24 25 -30℃ ~ 125℃ 22.8 24 25.2 22.8 24 25.2 95 480 78 400 41 240 28 120 4.8 6.5 26.5V ≤ VIN ≤ 39V 25℃ 29V ≤ VIN ≤ 39V 25℃ mV 25℃ Bias Current Bias Current Change IB ΔIB mA 28V ≤ VIN ≤ 39V 1mA ≤ Io ≤ 40mA 125℃ 6 -30℃ ~ 125℃ 1.5 Output Noise Voltage VN 10Hz ≤ f ≤ 100kHz 25℃ Ripple Rejection RR 27.5V ≤ VIN ≤ 37.5V, f=120Hz 25℃ Dropout Voltage VD Oct. 2013 - Rev. 1.5.1 V mV 1mA ≤ Io ≤ 100mA 1mA ≤ Io ≤ 40mA UNIT 25℃ -9 - mA 0.1 30 82 uV 33 dB 1.7 V HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX Note 1. Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33uF capacitor across the input and a 0.1uF capacitor across the output. Note 2. This specification applies only for DC power dissipation permitted by absolute maximum ratings. Oct. 2013 - Rev. 1.5.1 - 10 - HTC 3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATOR LM78LXX TYPICAL OPERATING CHARACTERISTICS 2.50 MAX POWER DISSIPATION (W) 1.2 Iout = 1mA Iout = 40mA Iout = 70mA DROPOUT VOLTAGE (V) 2.25 1 0.8 0.6 0.4 0.2 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0 0.00 0 25 50 75 100 125 0 25 Power Dissipation vs. Ambient Temperature, TO-92 75 100 125 Dropout Voltage vs. Ambient Temperature 5 8 QUIESCENT CURRENT (mA) Iout = 1mA Iout = 40mA Iout = 70mA 7 OUTPUT VOLTAGE (V) 50 AMBIENT TEMPERATURE (˚C ) AMBIENT TEMPERATURE TA(˚C) 6 5 4 3 2 4 3 2 1 1 0 0 0 1 2 3 4 5 6 7 INPUT VOLTAGE (V) 8 9 0 10 Output Voltage vs. Input Voltage 5 10 15 20 INPUT VOLTAGE (V) 25 30 Quiescent Current vs. Input Voltage 8 TA = 25°C TA = 125°C OUTPUT VOLTAGE (V) 7 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 200 225 250 OUTPUT CURRENT (mA) Output Voltage vs. Output Current Oct. 2013 - Rev. 1.5.1 - 11 - HTC