1703062-4

4 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2003 2 3 1 2003 LOC BY - 8.13 0.25 D 13.97 5 5 27.43 0.38 P LTR B6 DESCRIPTION DATE REVISED PER ECR-19-008967 DWN APVD BDA 30SEP2019 MATES 2 RECOMMENDED PANEL THICKNESS 0.76 - 2.29 mm 3 PANEL MUST BE PUNCHED SO THAT THE HOUSING ENTERS THE PANEL IN THE SAME DIRECTION AS THE PUNCH 4 CIRCUIT NUMBER 1 LOCATION 5 DIMENSION INDICATED AS MOLDED. ADDITIONAL GROWTH DUE TO SUBSEQUENT MOISTURE ABSORPTION MAY OCCUR 6 UNDERWRITERS RECOGNIZED COMPONENT LOGO AND CSA CERTIFICATION LOGO TO BE LOCATED ONCE EACH ON SIDE OF HOUSING 7 MATERIAL CORRESPONDING TO THE REQUIREMENTS OF IEC 60335 (INCL. GLOW WIRE TEST 750 $ C, WITHOUT FLAME) 8 OPTIONAL FOR KEYING HOUSING IN PANEL 9 PRELIMINARY PART NOT RELEASED FOR PRODUCTION SF WITH APPROPRIATE UNIVERSAL MATE-N-LOK PLUG RECOMMENDED PANEL CUT OUT 3:1 4.45 0.25TYP B 2 1 +0.13 13.21 -0.25 C REVISIONS DIST AI ALL RIGHTS RESERVED. C 4 14.35 6 8.64 0.25 B 1:1 7 8 2.79 2.41 0.25 13.46 7.62 5 2.54 6.35 9 8 7 8 7 7 7 1-1703062-2 A PA66 UL94 V0 (GWT 750°C) NATURAL 1-1703062-1 1 PA6 UL94 V0 NATURAL 1703062-4 A PA6 UL94 V2 GWT 750°C BLACK 1703062-3 A PA6 UL94 V2 GWT 750°C RED 1703062-2 A PA6 UL94 V2 GWT 750°C BLUE 1703062-1 A PA6 UL94 V2 GWT 750°C NATURAL REMARK THIS DRAWING IS A CONTROLLED DOCUMENT. A TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL FINISH 7 1471-9 (3/11) D PA 6 0.13 - 16APR2004 MAHNKE, B. CHK 26APR2004 ZITZ, A. APVD 27APR2004 BLEICHER, M. PN MATERIAL COLOUR DWN TE Connectivity NAME PRODUCT SPEC - APPLICATION SPEC 1 $ REV - WEIGHT SIZE 2.55 g - CUSTOMER DRAWING A2 A CAP 2 CIRCUIT UNIVERSAL MATE-N-LOK - CAGE CODE 00779 RESTRICTED TO DRAWING NO 1703062 SCALE 4:1 SHEET 1 OF 1 REV B6