Z-PACK TinMan 85 ohm High Speed Backplane Connector
Z-PACK TinMan 85 ohm Connector Overview
Product Facts
■
10+ Gbps performance
■
85 ohm impedance
for differential pair
configuration
■
5 pair version offers 26
pairs/10mm [66 differential
pairs/inch] fitting within a
25.40 [1.00] card slot pitch
■
3 pair version offers 16
pairs/10mm [40 differential
pairs/inch] fitting within a
16.25 [.625] card slot pitch
■
Right angle pin headers
(coplanar) in 3 pair and 5
pair versions
■
Vertical receptacles
(mezzanine) in 5 pair
version
■
High speed cable
assemblies and hardware
■
Reliable, redundant
contact design on every
signal contact
■
Modular system offered in
various column versions
■
Meets industry reliability
requirements of
Bellcore/Telcordia
■
Sequencing for ground
and signal contacts
■
RoHS compliant
Increasing system performance is a continuous challenge within the
interconnection channel.
One design approach gaining momentum in the industry is the reduction of the
system characteristic
impedance from 100 ohm to
85 ohm. Such a reduction of
impedance from 100 ohm to
85 ohm can improve overall
system performance by
incorporating thinner PC
boards, increasing density
with same board thickness
and making it easier to
match the system impedance to the connector footprint impedance.
Tyco Electronics is leading
the way in providing a complete interconnect solution
for this emerging market.
The suite of Z-PACK TinMan
85 ohm connectors provides the same industry
leading performance and
features and benefits
designed into the standard
100 ohm Z-PACK TinMan
connector system but in an
85 ohm impedance package. This connector was
designed to provide 85 ohm
nominal characteristic
impedance through the
entire connector, from PCB
footprint to PCB footprint.
TELCORDIA is a trademark of Telcordia
Technologies, Inc.
As part of the complete
Z-PACK TinMan connector
product family, the 85 ohm
version offers protected
right-angle and vertical
receptacles for use on
daughtercards and mezzanine boards where handling
damage can be a concern
when plugging to a mating
header. Ground contacts
strategically positioned
within each column of the
connector, combined with
unique contact lead frame
arrangements, enable the
Z-PACK TinMan 85 ohm
connector to achieve low
crosstalk and high throughput performance levels.
A dual point of contact
mating interface and
compliant pin interface to
printed circuit board help
provide reliability.
Technical Documents
Industry Applications
Signal Integrity
The Z-PACK TinMan 85 ohm
connector family is designed
for the cost pressured, high
performance, high signal
density, blade and rack
mount server applications
implementing an 85 ohm
system impedance.
Characteristic Impedance —
Differential @ 85 ohms ±10%
Crosstalk — Multi-pair differential
crosstalk: 2.1% @ 50ps
Insertion Loss — -2 dB @ 10 GHz
For additional information visit:
http://www.tycoelectronics.com/products/tinman85ohm
Product Specification 108-2303-1
Application Specification
114-13243
Routing Guide Report #27GC001-1
Material and Finish
Signal Contact — High Strength
Copper Alloy
Ground Contact — High Strength
Copper Alloy
Housing — Liquid Crystal Polymer,
UL 94V-0 Rated
Platings — Telcordia compliant
interface, Nickel underplate
Compliant Pin Plating —
RoHS Compliant
Ratings
Temperature Range —
-65°C to +90°C
Current Rating — 0.5 A/contact @
< 30°C T-Rise
Durability — 200 cycles
Dielectric Withstanding Voltage —
560 VAC
Operating Voltage — 250 VAC max.
Note: All part numbers are
RoHS compliant.
1
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Right Angle Receptacle Assemblies (85 ohm)
Column
Part Number
8
1934954-1
Dimension
A
B
15.35
13.30
.604
.524
10
1934932-1
19.15
.754
17.10
.673
*
16
2065042-1
30.55
1.203
28.50
1.122
*
Application
Tooling
Mates With
*
1934947-1, 2065053-1, 2065305-1,
2065307-1, 1934948-1, 1934985-1,
2065739-1, 2065738-1
1934822-1, 2065027-1, 2065309-1
2065311-1, 1934937-1, 2065025-1,
2065740-1, 2065741-1
2065054-1, 2065055-1, 2065329-1,
2065331-1, 1934986-1, 1934987-1
2065748-1, 2065749-1
* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
2
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
35 Pair Right Angle Receptacle Assemblies (85 ohm)
Column
Part Number
8
1934811-1
Dimension
A
B
15.35
13.30
.604
.524
10
1934951-1
19.15
.754
17.10
.673
*
16
2065038-1
30.55
1.203
28.50
1.122
*
Application
Tooling
Mates With
*
1934806-1, 2065043-1, 2065237-1,
2065239-1, 1934974-1, 1934975-1
2065704-1, 2065705-1
1934950-1, 2065044-1, 2065790-1,
2065791-1, 1934976-1, 1934977-1
2065706-1, 2065707-1
2065045-1, 2065046-1, 2065257-1,
2065259-1, 1934978-1, 1934979-1,
2065716-1, 2065717-1
* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
3
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Receptacle Assemblies - 15 mm Stack Height Version (85 ohm)
Column
Part Number
8
1934949-1
Dimension
A
B
15.35
13.30
.605
.524
10
2065024-1
19.15
.754
17.10
.673
*
16
1934973-1
30.70
1.210
28.50
1.122
*
Application
Tooling
Mates With
*
1934947-1, 2065053-1, 2065305-1,
2065307-1, 1934948-1, 1934985-1,
2065738-1, 2065739-1
1934822-1, 2065309-1, 2065311-1,
2065027-1, 1934937-1, 2065025-1,
2065740-1, 2065741-1
2065054-1, 2065055-1, 2065329-1,
2065331-1, 1934986-1, 1934987-1,
2065748-1, 2065749-1
* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
4
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Receptacle Assemblies - 39 mm Stack Height Version (85 ohm)
Column
Part Number
8
2065490-1
Dimension
A
B
15.35
13.30
.605
.524
10
2065599-1
19.15
.754
17.10
.673
*
16
2065493-1
30.70
1.210
28.50
1.122
*
Application
Tooling
Mates With
*
1934947-1, 2065053-1, 2065305-1,
2065307-1, 1934948-1, 1934985-1,
2065738-1, 2065739-1
1934822-1, 2065309-1, 2065311-1,
2065027-1, 1934937-1, 2065025-1,
2065740-1, 2065741-1
2065054-1, 2065055-1, 2065329-1,
2065331-1, 1934986-1, 1934987-1,
2065748-1, 2065749-1
* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
5
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Header Assemblies (85 ohm)
Column
Part Number
8
1934985-1
10
1934937-1
16
1934987-1
Dimension
A
B
15.35
13.30
.604
.524
19.15
17.10
.754
.673
30.55
28.50
1.203
1.122
Application
Tooling*
Mates With
1934957-1
1934954-1, 1934949-1, 2065490-1
1934957-2
1934932-1, 2065024-1, 2065599-1
1934957-4
2065042-1, 1934973-1, 2065493-1
* Reference Application Specification 114-13243.
Note: All part numbers are RoHS
compliant. Tin-Lead parts are
RoHS compliant through
exemption for lead in press-fit
connectors.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
6
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Header Assemblies -—Left
LeftEnd
EndWall
Wall(85
(85ohm)
ohm)
Column
Part Number
8
2065738-1
10
2065740-1
16
2065748-1
Dimension
A
B
16.30
13.30
.642
.524
*
*
*
*
31.50
28.50
1.240
1.122
Application
Tooling*
Mates With
1934957-1
1934954-1, 1934949-1, 2065490-1
1934957-2
1934932-1, 2065024-1, 2065599-1
1934957-4
2065042-1, 1934973-1, 2065493-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
7
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Header Assemblies -—Right
RightWall
EndEnd
Wall(85
(85ohm)
ohm)
Column
Part Number
8
2065739-1
10
2065741-1
16
2065749-1
Dimension
A
B
17.00
13.30
.669
.524
*
*
*
*
32.20
28.50
1.268
1.122
Application
Tooling*
Mates With
1934957-1
1934954-1, 1934949-1, 2065490-1
1934957-2
1934932-1, 2065024-1, 2065599-1
1934957-4
2065042-1, 1934973-1, 2065493-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
8
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Vertical Header Assemblies -—Double
DoubleWall
EndEnds
Walls(85
(85ohm)
ohm)
Column
Part Number
8
1934948-1
10
2065025-1
16
1934986-1
Dimension
A
B
17.95
13.30
.707
.524
21.75
17.10
.856
.673
33.15
28.50
1.305
1.122
Application
Tooling*
Mates With
1934957-1
1934954-1, 1934949-1, 2065490-1
1934957-2
1934932-1, 2065024-1, 2065599-1
1934957-4
2065042-1, 1934973-1, 2065493-1
* Reference Application Specification 114-13243.
Note: All part numbers are RoHS
compliant. Tin-Lead parts are
RoHS compliant through
exemption for lead in press-fit
connectors.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
9
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Vertical Header Assemblies (85 ohm)
Column
Part Number
8
1934975-1
10
1934977-1
16
1934979-1
Dimension
A
B
15.35
13.30
.604
.524
19.15
17.10
.754
.673
30.55
28.50
1.203
1.122
Application
Tooling*
Mates With
2018398-1
1934811-1, 1934968-1, 2065474-1
2018398-1
1934951-1, 1934969-1, 2065475-1
2018398-2
2065038-1, 1934970-1, 2065478-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
10
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Vertical Header Assemblies -—Left
LeftEnd
EndWall
Wall(85
(85ohm)
ohm)
Column
Part Number
8
2065704-1
10
2065706-1
16
2065716-1
Dimension
A
B
16.30
13.30
.642
.524
20.10
17.10
.791
.673
31.50
28.50
1.240
1.122
Application
Tooling*
Mates With
2018398-1
1934811-1, 1934968-1, 2065474-1
2018398-2
1934951-1, 1934969-1, 2065475-1
2018398-3
2065038-1, 1934970-1, 2065478-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant.
11
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Verical
VerticalHeader
HeaderAssemblies
Assemblies-—
Right
Right
End
End
Wall
Wall
(85(85
ohm)
ohm)
Column
Part Number
8
2065705-1
10
2065707-1
16
2065717-1
Dimension
A
B
17.00
13.30
.669
.524
20.08
17.10
.791
.673
32.20
28.50
1.268
1.122
Application
Tooling*
Mates With
2018398-1
1934811-1, 1934968-1, 2065474-1
2018398-2
1934951-1, 1934969-1, 2065475-1
2018398-3
2065038-1, 1934970-1, 2065478-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
12
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Verical
VerticalHeader
HeaderAssemblies
Assemblies-—
Double
Double
End
End
Walls
Walls
(85(85
ohm)
ohm)
Column
Part Number
8
1934974-1
10
1934976-1
16
1934978-1
Dimension
A
B
17.95
13.30
.707
.524
21.75
17.10
.856
.673
33.15
28.50
1.305
1.122
Application
Tooling*
Mates With
2018398-1
1934811-1, 1934968-1, 2065474-1
2018398-2
1934951-1, 1934969-1, 2065475-1
2018398-3
2065038-1, 1934970-1, 2065478-1
* Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
13
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Right Angle Pin Header Assemblies (85 ohm)
Column
Part Number
8
2065053-1
10
2065027-1
16
2065055-1
Dimension
A
B
15.35
13.30
.604
.524
*
*
*
*
30.55
28.50
1.203
1.122
Application
Tooling
Mates With
*
1934954-1, 1934949-1, 2065490-1
*
1934932-1, 2065024-1, 2065599-1
*
2065042-1, 1934973-1, 2065493-1
* Custom tooling not required. Utilizes flat-rock insertion tooling.
Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
14
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
5 Pair Right Angle Pin Header Assemblies - Double End Walls (85 ohm)
Column
Part Number
8
1934947-1
10
1934822-1
16
2065054-1
Dimension
A
B
18.05
13.30
.711
.524
*
*
*
*
33.25
28.50
1.309
1.122
Application
Tooling
Mates With
*
1934954-1, 1934949-1, 2065490-1
*
1934932-1, 2065024-1, 2065599-1
*
2065042-1, 1934973-1, 2065493-1
* Custom tooling not required. Utilizes flat-rock insertion tooling.
Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
15
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Right Angle Pin Header Assemblies (85 ohm)
Column
Part Number
8
2065043-1
10
2065044-1
16
2065046-1
Dimension
A
B
15.35
13.30
.604
.524
19.15
17.10
.754
.673
30.55
28.50
1.203
1.122
Application
Tooling
Mates With
*
1934811-1, 1934968-1, 2065474-1
*
1934951-1, 1934969-1, 2065475-1
*
2065038-1, 1934970-1, 2065478-1
* Custom tooling not required. Utilizes flat-rock insertion tooling.
Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
16
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
3 Pair Right Angle Pin Header Assemblies -—Double
DoubleEnd
EndWalls
Walls(85
(85ohm)
ohm)
Column
Part Number
8
1934806-1
10
1934950-1
16
2065045-1
Dimension
A
B
18.05
13.30
.711
.524
21.85
17.10
.860
.673
33.25
28.50
1.309
1.122
Application
Tooling
Mates With
*
1934811-1, 1934968-1, 2065474-1
*
1934951-1, 1934969-1, 2065475-1
*
2065038-1, 1934970-1, 2065478-1
* Custom tooling not required. Utilizes flat-rock insertion tooling.
Reference Application Specification 114-13243.
Note: For additional information
on pcb routing guidelines,
reference the Z-PACK TinMan
Connector Routing Guide
Report #27GC001-1.
* Finished Hole Diameter = 0.46 ±0.05 [.018 ±.002]
Drilled Hole Diameter = 0.55 ±0.02 [.022 ±.001]
Copper Thickness = 0.038 ±0.013 [.0015 ±.0005]
Tin-Lead Thickness = 0.008 ±0.004 [.0003 ±.0002]
Finishes other than Tin-Lead, See Appl. Spec. 114-13243
Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in
press-fit connectors.
17
Catalog 1773095
Revised 06-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector
Part
PageHead_12_HelvCdBd
Number Index
(Continued)
Part No.
1934806-1
1934811-1
1934822-1
1934932-1
1934937-1
1934947-1
1934948-1
1934949-1
1934950-1
1934951-1
1934954-1
1934957-1
1934957-2
1934957-4
1934968-1
1934969-1
1934970-1
1934973-1
1934974-1
1934975-1
1934976-1
1934977-1
1934978-1
1934979-1
1934985-1
1934986-1
1934987-1
2018398-1
2018398-2
2018398-3
2065024-1
2065025-1
2065027-1
2065038-1
2065042-1
2065043-1
Page
3, 17
3, 10, 11, 12, 13, 16, 17
2, 4, 5, 15
2, 6, 7, 8, 9, 14, 15
2, 4, 5, 6
2, 4, 5, 15
2, 4, 5, 9
4, 5, 6, 7, 8, 9, 14, 15
3, 17
3, 10, 11, 12, 13, 16, 17
2, 6, 7, 8, 9, 14, 15
6, 7, 8, 9
6, 7, 8, 9
6, 7, 8, 9
10, 11, 12, 13, 16, 17
10, 11, 12, 13, 16, 17
10, 11, 12, 13, 16, 17
4, 5, 6, 7, 8, 9, 14, 15
3, 13
3, 10
3, 13
3, 10
3, 13
3, 10
2, 4, 5, 6
2, 4, 5, 6
2, 4, 5, 6
10, 11, 12, 13
10, 11, 12, 13
11, 12
4, 6, 7, 8, 9, 14, 15
2, 4, 5, 9
2, 4, 5, 14
3, 10, 11, 12, 13, 16, 17
2, 6, 7, 8, 9, 14, 15
3, 16
Note: All part numbers are RoHS compliant.
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
©2009 Tyco Electronics Corporation
1773455-6 CIS PDF 6/2009
TE logo, Tyco Electronics, Z-PACK and Z-PACK TinMan are trademarks.
While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee
that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any
adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are
those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics
be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or
misuse of its products. Users should independently evaluate the suitability of, and test each product for,
their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics
for the most current product information. The export of certain Tyco Electronics products is restricted by the
Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as
amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S.
Government. Buyer must comply with all applicable export laws of all applicable jurisdictions.
Part No.
2065044-1
2065045-1
2065046-1
2065053-1
2065054-1
2065055-1
2065237-1
2065239-1
2065257-1
2065259-1
2065305-1
2065307-1
2065309-1
2065311-1
2065329-1
2065331-1
2065474-1
2065475-1
2065478-1
2065490-1
2065493-1
2065599-1
2065704-1
2065705-1
2065706-1
2065707-1
2065716-1
2065717-1
2065738-1
2065739-1
2065740-1
2065741-1
2065748-1
2065749-1
2065790-1
2065791-1
Page
3, 16
3, 17
3, 16
2, 4, 5, 14
2, 4, 5, 15
2, 4, 5, 14
3
3
3
3
2, 4, 5
2, 4, 5
2, 4, 5
2, 4, 5
2, 4, 5
2, 4, 5
10, 11, 12, 13, 16, 17
10, 11, 12, 13, 16, 17
10, 11, 12, 13, 16, 17
5, 6, 7, 8, 9, 14, 15
5, 6, 7, 8, 9, 14, 15
5, 6, 7, 8, 9, 14, 15
3, 11
3, 12
3, 11
3, 12
3, 11
3, 12
2, 4, 5, 7
2, 3, 5, 8
2, 4, 5, 7
2, 4, 5, 8
2, 4, 5, 7
2, 4, 5, 8
3
3
工商网监
湘ICP备2023018690号
