D369-MP33-NP1

D369-MP33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector D369-MP33-NP1  ACTIVE DEUTSCH | DEUTSCH 369 Shielded Connector TE Internal #: YD369-MP33-NP10000 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector View on TE.com > Connectors > Rectangular Connectors > Standard Rectangular Connectors > Rectangular Connectors: 3-Way Shielded Plug Connector Product Type: Connector Assembly Connector & Housing Type: Plug Mating Alignment: With Mating Alignment Type: Keyed Mating Retention: With All Rectangular Connectors: 3-Way Shielded Plug (2) Features Product Type Features Connector Seal & Plug Type Triple-Seal Connector Shell Size 03 Connector Product Type Connector Assembly Connector & Housing Type Plug Connector System Wire-to-Wire Insertion Force Type Normal Sealable Yes Connector & Contact Terminates To Wire & Cable Configuration Features  Number of Cavities 3 Contacts Preloaded Yes Number of Power Positions 3 Number of Columns 3 Number of Signal Positions 3 Number of Positions 3 Number of Rows 1 Electrical Characteristics For support call+1 800 522 6752 01/03/2024 12:37AM | Page 1 D369-MP33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector Electrical Characteristics Operating Voltage 400 VAC Body Features Connector Seal Color Natural Seal Type Grommet Seal, Interfacial Seal Cable Exit Angle 180° Shell Plating Material Nickel Seal Material Fluorosilicone Connector & Keying Code N Contact Features Contact Size Size 22 Contact Type Pin Wire Contact Termination Area Plating Material Gold Contact Mating Area Plating Material Gold Contact Retention Within Housing With Contact Current Rating (Max) 5A Termination Features Termination Method to Wire & Cable Crimp Mechanical Attachment Mating Alignment With Mating Alignment Type Keyed Mating Retention With Mating Retention Type Button Latch Housing Features Shell Material Composite Housing Material Composite Housing Color Black Centerline (Pitch) 2.54 mm[.1 in] Dimensions Row-to-Row Spacing 2.54 mm[.1 in] Compatible Insulation Diameter Range .71 – 1.37 mm[.028 – .054 in] Usage Conditions  Operating Temperature Range For support call+1 800 522 6752 -55 – 175 °C[-67 – 347 °F] 01/03/2024 12:37AM | Page 2 D369-MP33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector Operating Temperature Range -55 – 175 °C[-67 – 347 °F] Operation/Application Shielded Yes Circuit Application Power & Signal Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant with Exemptions EU ELV Directive 2000/53/EC Not Yet Reviewed China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JAN 2022 (223) SVHC > Threshold: Pb (1.2% in Contact) Article Safe Usage Statements: Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Reflow solder capable to 245°C Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach Compatible Parts  For support call+1 800 522 6752 01/03/2024 12:37AM | Page 3 D369-MP33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector TE Part # YD369-MR33-NS10000 TE Part # YD369-MB33-NS10000 TE Part # YD369-MB33-NS40000 TE Part # YD369-MG33-NS40000 369 3 WAY SHIELDED REC, CRIMPT, SKT 369 SHIELDED 3WAY PANEL REC, CRIMP,SKT 369 SHIELDED 3WAY PNL REC,90 PCB AU,SKT 369 SHIELDED 3WAY PCB REC,90 PCB AU,SKT Also in the Series DEUTSCH 369 Shielded Connector Standard Rectangular Connectors(15) Customers Also Bought  TE Part #D369-P33-NS1 TE Part #D369-P66-NS1 TE Part #5-1618404-0 TE Part #ZPF000000000110398 369 3 WAY PLUG, CRIMP, SKT 369 6 WAY PLUG, CRIMP, SKT KHR500KSANL=Contactor, SPST-NO DMC-MD 20 E TE Part #ZPF000000000102764 TE Part #YD369-MR99-NS10000 TE Part #DCR-1A-02 TE Part #ZPF000000000099685 787-8055-30M 369 9 WAY SHIELDED REC, CRIMP, SKT COMPOSIT RAIL DMC-M 99-01 SN TE Part #DCR-1A-06 TE Part #ZPF000000000102762 COMPOSIT RAIL 787-8055-10M Documents For support call+1 800 522 6752 01/03/2024 12:37AM | Page 4 D369-MP33-NP1 Standard Rectangular Connectors, Connector Assembly, Plug, Mating Alignment, Keyed Mating Alignment Type, DEUTSCH 369 Shielded Connector Documents Product Drawings 369 3 WAY SHIELDED PLUG, CRIMP, PIN English CAD Files 3D PDF 3D Customer View Model ENG_CVM_CVM_YD369-MP33-NP10000_AA.2d_dxf.zip English Customer View Model ENG_CVM_CVM_YD369-MP33-NP10000_AA.3d_igs.zip English Customer View Model ENG_CVM_CVM_YD369-MP33-NP10000_AA.3d_stp.zip English By downloading the CAD file I accept and agree to the Terms and Conditions of use.  For support call+1 800 522 6752 01/03/2024 12:37AM | Page 5