EB1UM-00000P-05KPA

EB100 High Accuracy Miniature Pressure Transducer SPECIFICATIONS      Miniature Design and Light Weight ±1% Total Error Band Available male threads such as : M5x0.8 10-32 UNF M8x1 5/16-24 UNF    Operating temperature up to 125 °C (257 °F) Combined errors of linearity, hysteresis & repeatability ±0.25% 0.5 to 4.5V amplified output The EB100 uses TE’s UltraStable technology that provides stability over a wide temperature range and performance previously available only in much higher priced sensors. The UltraStable technology employs a silicon-based strain gage, isolated from the media by an oil-filled capsule and a stainless steel diaphragm. The high stability offers excellent repeatability and minimal hysteresis. APPLICATIONS  Unique pressure reference version Absolute The EB100 pressure transducer is the smallest design proposed by TE Connectivity from the UltraStable line. It sets a new price / performance standard for demanding commercial and heavy industrial applications where high accuracy, small size and low weight are desirable. This series is suitable for measurement of liquid or gas pressure, including difficult media such as contaminated water, steam, and mildly corrosive fluids. FEATURES    Ranges from 20 to 350 bar (300 to 5,000 psi) Motor Sport: Oil, Coolant, Fuel, Brake Systems Hydraulic/Pneumatic Systems Automotive Test Stands Military/Aerospace Test Stands The 100% stainless steel media isolation covers all but the most corrosive environments, offering excellent durability. Custom OEM designs are available including various ports and output options. On request, Instruction documents can be provided to ease the selection and use of our sensors and provide helpful tips. SENSOR SOLUTIONS ///EB100_en 09/2017 Page 1 EB100 High Accuracy Miniature Pressure Transducer STANDARD RANGES Ranges (FS) bar psi 20 300 35 500 70 1K 100 1.5K 200 3K 350 5K Pressure Reference abs. (type3) Pressure Overload (rated pressure) Burst Pressure (rated pressure)  2 x FS 3 x FS  2 x FS 3 x FS  2 x FS 3 x FS  2 x FS 3 x FS  2 x FS 3 x FS 2 x FS 3 x FS  PERFORMANCE SPECIFICATIONS (typical values at temperature 23±3°C) PARAMETERS VALUES Combined Non-Linearity, Hysteresis, and Repeatability ±0.25 %FS NOTES Long Term Stability (1 year) ±0.1 %FS Total Error Band (TEB over CTR) ±1 %FS Bandwidth (-3 dB) 120 Hz Isolation resistance @50VDC 50 MΩ Compensated Temperature Range (CTR) -20 to +125 °C (-4 to+257 F) Operating Temperature Range (OTR) -40 to +125 °C (-40 to +257 F) Storage Temperature -40 to +125 °C (-40 to +257 F) Vibration (20 to 200Hz) 20 g 3 Shock (11ms) 50 g 4 Pressure Cycles (Zero to Full Scale) 1 Million Weight (without cable) 15 grams +21 grams per meter of cable Ingress Protection IP66 Media Compatibility Fluids compatible with 17-4PH, 316 S.S. and FKM Fluoroelastomer 1 2 Notes 1. Best fit straight line for all pressure ranges except for 200 bar (3 kpsi) = +/-0.35% and 350 bar (5 kpsi) = +/-0.5%. 2. TEB includes all accuracy errors, thermal errors, span and zero tolerances. 3. Per MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve L. 4. 1/2 sine per MIL-STD 202F Method 213B condition A. CE compliance IEC 55022 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (2kV contact/2kV air) IEC 61000-4-3 EM Field Immunity (3V/m) IEC 61000-4-4 Electrical Fast Transient Immunity (0.5kV) IEC 61000-4-6 Conducted Immunity (3V) SUPPLY VOLTAGE ELECTRICAL CONNECTION OPTIONS (table 1) Code Supply voltage Signal Code Connection U 8 to 30 V (current < 5 mA) 0.5 – 4.5 V M 1 metre of shielded cable (PFA) P 5 metres of shielded cable (PFA) R 10 metres of shielded cable (PFA) S 1 metre of shielded cable (PFA) fully covered by shrink tube model Raychem DR25 or equivalent DIMENSIONS SENSOR SOLUTIONS ///EB100_en 09/2017 Page 2 EB100 High Accuracy Miniature Pressure Transducer PHYSICAL (table 2) Model Pressure port Length "C" Hex."D" O-ring supplied Installation torque max N M5x0.8 6.6 (.26”) 11 (.433") Ø3.5x1.5 FKM Fluoroelastomer 1 Nm (9 In-Pounds) V 10-32 UNF-2A 6.6 (.26”) 11 (.433") Ø3.5x1.5 FKM Fluoroelastomer 1 Nm (9 In-Pounds) S M8X1 7.6 (.30”) 11 (.433") Ø6.07x1.63 FKM Fluoroelastomer 3 Nm (27 In-Pounds) Q 5/16-24 UNF-2A 7.6 (.30”) 11 (.433") Ø6.07x1.63 FKM Fluoroelastomer 3 Nm (27 In-Pounds) P M10x1 8.2 (.32") 13 (.512") Ø7.65x1.63 FKM Fluoroelastomer 5 Nm (27 In-Pounds) X 3/8-24 UNF-2A 8.2 (.32") 13 (.512") Ø7.65x1.63 FKM Fluoroelastomer 5 Nm (27 In-Pounds) INSTALLATION & CONNECTION RECOMMENDED PRESSURE FITTING DESIGN (1) Thread "A" Dim. “B” Dim. “C” Dim. “D” M5x0.8(2) 6.35 mm 1.5 mm 0.2 mm 10-32 UNF(2) M8x1 5/16-24 UNF-2A M10x1 3/8-24 UNF-2A 0.25” 0.059” 0.008” 9.1 mm 1.9 mm 0.3 mm 0.358” 0.074” 0.012” 10.7 mm 1.9 mm 0.3 mm 0.421" 0.074” 0.012” 1. Tolerances on dimensions = ± 0.05 mm (0.002”) This pressure fitting design is only a recommendation but it stays under customer's responsibility. 2. For model M5x0.8 or 10-32 UNF used with pressure higher than 200 bar (3k psi) it is recommended to replace O-ring by bonded ring (ref: MSE05417) and to design the pressure fitting without O-ring chamber. WIRING: SHIELDED CABLE 4 LEADS AWG26 RED +SUPPLY GREEN +OUTPUT WHITE -OUTPUT BLACK -SUPPLY The shield is not connected to sensor’s body. SENSOR SOLUTIONS ///EB100_en 09/2017 Page 3 EB100 High Accuracy Miniature Pressure Transducer ORDERING INFORMATION EB1 U M – 0000 1 P – 300P A Output Code Supply Voltage 8 – 30V U Pressure Range psi Bar std std 020B 300P 035B 500P 070B 01KP 100B 1K5P 200B 03KP 350B 05KP Output 0.5 – 4.5V Connection Connection Code 1 meter Cable M 5 meter cable P 10 meter cable R 1 meter Cable S1 1 Fully covered by Shrink tube Raychem DR25 or equivalent Calibration Certification 0 No Calibration Certificate 1 With Calibration Certificate The psi range models are only supplied with imperial thread design. The bar range models are only supplied with metric thread design Pressure Port Code Port M8x1 S Ø6.07x1.63 Viton O-ring 5/16-24 UNF Q Ø6.07x1.63 Viton O-ring M5x0.8 N Ø3.5x1.5 Viton O-ring 10-32 UNF Male V Ø7065x1.63 Viton O-ring M10x1 Male P Ø7.65x1.63 Viton O-ring 3/8-24UNF Male X Ø7.65x1.63 Viton O-ring . NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company Phone: 800-522-6752 Email: customercare.frmt@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Phone: +31 73 624 6999 Email: customercare.lcsb@te.com Measurement Specialties (China), Ltd., a TE Connectivity Company Phone: 0400-820-6015 Email: customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///EB100_en All Rights Reserved. 09/2017 Page 4