HEX54-AC-00-13-A3-C

SPECIFICATION CONTROL DRAWING ØC MAX ØB MAX A THREAD 25.0 [0.98"] MAX STRAIGHT BODY STYLE - 00 1 3 4 2 F MAX D MAX G MAX M E AX 45° BODY STYLE - 45 DRAWN K.KUTA-WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 28/07/2017 CHECKED 28/07/2017 APPROVED K.SHEPPARD 30/07/2017 APPROVED K.SHEPPARD 11/12/2017 REVISIONS LTR DESCRIPTION B REVISED PER D060254 C REVISED PER ECO-17-017923 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 17/08/2006 11/12/2017 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED K.SHEPPARD 90° BODY STYLE - 90 TITLE: HEXASHIELD BACKSHELL FOR CODE 54 CONNECTORS, PLAIN CLAMPLING NUT ASSY USED ON: SEE APPLICATION NOTE TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRG REV: SHT HEX54-AY-YY-YY-AYY-1-YY C 1 SPECIFICATION CONTROL DRAWING KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT - PLAIN CONIC RING STAR MATERIAL ALUMINIUM ALUMINIUM ALUMINIUM ALUMINIUM ALLOY ALLOY ALLOY ALLOY TABLE OF DIMENSIONS Order Number Shell Size (see overleaf) Type A Type B A Thread UNF/UNEF-2B 09 08 N/A 0.5000"-20 11 10 N/A 0.6250"-24 13 12 07 0.7500"-20 15 14 12 0.8750"-20 17 16 19 1.0000"-20 19 18 27 1.0625"-18 21 20 37 1.1875"-18 23 22 N/A 1.3125"-18 25 24 N/A 1.4375"-18 61 N/A 61 1.5000"-18 ØB MAX ØC MAX D MAX E MAX F MAX G MAX 16.0 [0.63"] 22.0 [0.87”] 25.0 [0.98”] 30.0 [1.18”] 33.0 [1.30”] 37.0 [1.46”] 38.0 [1.50”] 41.0 [1.61”] 46.0 [1.81”] 42.0 [1.65”] 17.5 [0.69”] 21.5 [0.85”] 22.5 [0.89”] 25.5 [1.00”] 28.5 [1.12”] 31.5 [1.24”] 35.0 [1.38”] 38.0 [1.50”] 41.0 [1.61”] 41.0 [1.61”] 12.5 [0.49”] 13.0 [0.51”] 14.0 [0.55”] 14.5 [0.57”] 15.0 [0.59”] 15.5 [0.61”] 16.5 [0.65”] 17.0 [0.67”] 18.0 [0.71”] 18.0 [0.71”] 25.5 [1.00”] 26.0 [1.02”] 26.5 [1.04”] 27.5 [1.08”] 28.0 [1.10”] 28.5 [1.12”] 29.0 [1.14”] 30.0 [1.18”] 31.0 [1.22”] 31.0 [1.22”] 16.0 [0.63”] 17.5 [0.69”] 19.0 [0.75”] 20.5 [0.81”] 22.0 [0.87”] 23.5 [0.93”] 25.5 [1.00”] 27.0 [1.06”] 28.5 [1.12”] 31.0 [1.22”] 29.0 [1.14”] 30.5 [1.20”] 32.0 [1.26”] 33.5 [1.32”] 35.0 [1.38”] 36.5 [1.44”] 38.5 [1.52”] 40.0 [1.57”] 41.5 [1.63”] 41.5 [1.63”] Ferrule Quantity Std. Opt.1 Opt.2 1 - - 2 - - 3 - - 5 - - 6 7 - 7 - - 9 11 - 10 13 - 12 17 - 12 17 18 PART NUMBERING HEX54-AC-00-21-A9-1-DS SERIES CONNECTOR INTERFACE MATERIAL A - ALUMINIUM ALLOY FINISH C - ELECTROLESS NICKEL TO MIL-C-26074 B - CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL TO QQ-P416 BODY STYLE 00 = STRAIGHT 45 = 45° 90 = 90° ORDER NUMBER FERRULE QUANTITY CODE BACK END OPTION 1 - PLAIN CLAMPING NUT STAR STYLE DS - DRILLED STAR (SEE NOTE 2) OMIT FOR PLAIN STAR DRAWN K.KUTA-WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 28/07/2017 CHECKED 28/07/2017 APPROVED K.SHEPPARD 30/07/2017 APPROVED K.SHEPPARD 11/12/2017 REVISIONS LTR DESCRIPTION B REVISED PER D060254 C REVISED PER ECO-17-017923 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 17/08/2006 11/12/2017 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED K.SHEPPARD TITLE: HEXASHIELD BACKSHELL FOR CODE 54 CONNECTORS, PLAIN CLAMPLING NUT ASSY USED ON: SEE APPLICATION NOTE TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRG REV: SHT HEX54-AY-YY-YY-AYY-1-YY C 2 SPECIFICATION CONTROL DRAWING APPLICATION: - These adaptors are designed to be mounted on the following connectors: MIL-C-26482 Series II MIL-C-83723 Series I and III MIL-C-5015 HE312 Shell Size Type A MIL-C-81703 Series III HE312 DBAD Shell Size Type B - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required - see illustration. - Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION: - See Installation Procedure RPIP-696-04. PACKAGING: - All components are supplied in a plastic bag. DRAWN K.KUTA-WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 28/07/2017 CHECKED 28/07/2017 APPROVED K.SHEPPARD 30/07/2017 APPROVED K.SHEPPARD 11/12/2017 REVISIONS LTR DESCRIPTION B REVISED PER D060254 C REVISED PER ECO-17-017923 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 17/08/2006 11/12/2017 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED K.SHEPPARD TITLE: HEXASHIELD BACKSHELL FOR CODE 54 CONNECTORS, PLAIN CLAMPLING NUT ASSY USED ON: SEE APPLICATION NOTE TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRG REV: SHT HEX54-AY-YY-YY-AYY-1-YY C 3 SPECIFICATION CONTROL DRAWING NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. ØH REF 2. The DS option, illustrated below, is for a Drilled Star, which is available on sizes 15 to 61 when the standard ferrule quantity is selected, and sizes 25 and 61 when the optional ferrule quantity is selected. This option is to allow unshielded wires to pass through the assembly. STAR SIZE ØH REF 15 17 19 21 3.0 6.0 9.0 12.0 [0.12"] [0.24"] [0.35"] [0.47"] 23 25 25 61 61 61 (Std.) (Opt.1) (Std.) (Opt.1) (Opt.2) 15.0 18.0 3.0 18.0 3.0 6.0 [0.59"] [0.71"] [0.12"] [0.71"] [0.12"] [0.24"] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected, then 2 items 4 will be supplied - one “split” and the other one standard. See below for illustration. "SPLIT" STAR EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT RING STAR + -A3 STANDARD STAR 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX54-AB-00-21-A9-1) DRAWN K.KUTA-WINCZURA DATE 3RD ANGLE PROJECTION NOT TO SCALE 28/07/2017 CHECKED 28/07/2017 APPROVED K.SHEPPARD 30/07/2017 APPROVED K.SHEPPARD 11/12/2017 REVISIONS LTR DESCRIPTION B REVISED PER D060254 C REVISED PER ECO-17-017923 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 17/08/2006 11/12/2017 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED K.SHEPPARD TITLE: HEXASHIELD BACKSHELL FOR CODE 54 CONNECTORS, PLAIN CLAMPLING NUT ASSY USED ON: SEE APPLICATION NOTE TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: DRG REV: SHT HEX54-AY-YY-YY-AYY-1-YY C 4