HS34
Hole Saw & Accessories
LAIRD NICKEL-PLATED HOLE SAW - REPLACEMENT BLADES & DRILL BIT
The Laird Hole Saw features a replaceable self-centering pilot bit (HS34DB) that prevents
dangerous "walking" of the saw and a replaceable hardened saw blade (HS34RB). It also
features a 1/8" depth limit that will prevent damage to the underlying headliner, yet it is
deep enough to cut through thicker aluminum surfaces encountered on utility vehicles
and ambulances. It is designed for a 3/8 drill chuck and is nickel-plated to guard the tool
against corrosion.
HS34
HS34DB
HS34RB
SPECIFICATIONS
Description
Teeth per Inch
X-ACT hole saw cuts a 3/4" hole x Depth 1/8".
Repl blades: HS34R; repl pilot bit: HS34DB
6
Item Height
1-1/2 in
Item Length
3/4 in
Item Width
3/4 in
Americas: +1.847 839.6925
IAS-AmericasEastSales@lairdtech.com
Europe: +44.1628.858941
IAS-EUSales@lairdtech.com
Asia: IAS-AsiaSales@lairdtech.com
www.lairdtech.com
ANT-DS-H34 0915
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are
sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved.
Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names
may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.
很抱歉,暂时无法提供与“HS34-L”相匹配的价格&库存,您可以联系我们找货
免费人工找货