K45C334

KILOVAC High Voltage Relays K45 Series Make & Break Load Switching — 1.5 - 2 kV Relays K45C Product Facts n Small, low profile 2 kV relay n Vacuum dielectric for power switching low current loads n Single pole, double throw contacts n Widely used in H.F. communication equipment n Meets requirements of MIL-R-83725 n Low power consumption Product Specifications Contact Arrangement — SPDT Contact Form — C Test Voltage, DC or 60 Hz (Peak) — 4 kV Rated Operating Voltage (Peak) — DC or 60 Hz — 2 kV 2.5 MHz — 1.8 kV 16 MHz — 1.4 kV 32 MHz — 1.1 kV Continuous Carry Current, Max. — DC or 60 Hz — 20 A 2.5 MHz — 16 A 16 MHz — 10 A 32 MHz — 6 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Contact Capacitance — Between Open Contacts — 1.6 pF Open Contacts to Ground — 2 pF Contact Resistance, Max. — 0.05 ohm Operate Time, Max. — 10 ms Release Time, Max. — 10 ms Shock, 11ms, 1/2 Sine (Peak) — 30 g Vibration — Peak — 10 g (10 to 2000 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life 2 million cycles Weight, Nominal — 21.26 g (0.75 oz.) Ordering Information Coil Data 12 V 8 Vdc 8.5 Vdc .5-5 Vdc 230 Ω Ratings listed are for 25°C, sea level conditions. 26.5 V 16 Vdc 17 Vdc 1-10 Vdc 920 Ω K45 C 3 3 4 Sample Part Number 䊳 7 KILOVAC High Voltage Relays Volts, Nominal DC Pickup, Max. Hold, Max. @ 65°C Dropout Coil Resistance (±10%) Series: Contact Form: C = SPDT Coil Voltage: 2 = 12 Vdc, Bus Wire 3 = 26.5 Vdc, Bus Wire High Voltage Connections: 3 = Solder Connection For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Mounting: 2 = Flanged 4 = Standard See page 7-87 for mounting methods. 7–57 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com