M5600-00000E-350BG

MEAS M5600 Wireless Pressure Transducer FEATURES • Heavy Industrial CE Approved • ±0.25% Pressure Non-Linearity • ±1.0% Total Error Band (TEB) • -10 to 60°C Compensated Temperature • Operating Temperature (Battery): o -20 to 60°C (Panasonic/Energizer CR2032) o -20 to 70°C (Sony/MuRata CR2032) o -20 to 85°C (Murata CR2050W) • Withstands 50g shock and maximal 10g Vibration • Excellent Long-term Stability APPLICATIONS • Gas and Liquid Flow Measurements • Tank Liquid Level Measurements • Liquid and Gas Filter Monitoring • Corrosive Gases and Liquids • Remote and Hard to Reach Locations • Factory Process Control • Energy Generation and Management • 316L or 17-4PH Stainless Steel Wetted Surfaces • Bluetooth 4.2 Wireless Communication • Pairing Mode or Advertising (Beaconing) Mode • 32-Bit Digital Pressure Data Output • 16-Bit Digital Temperature Data Output • Weatherproof IP65 Rating • Variety of Pressure Ports • CR2032/CR2050W Battery Compatible The M5600 series from TE Connectivity’s Sensors Business Unit sets the price and performance standard for wireless pressure transducers used in demanding industrial and smart factory applications. The modular M5600 wireless pressure transducer from our Microfused line is enclosed in a stainless steel and PBT housing. This high accuracy, 24-bit ADC digital output wireless transducer eliminates hard wiring and provides remote process control and monitoring via Bluetooth® 4.2 Wireless Communication. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The wetted surfaces of the pressure ports are made from 316L or 17-4PH stainless steel. The port design uses no internal O-rings or organics exposed to the pressure media which provides excellent durability and long-term performance. The M5601 is FM certified for Intrinsic Safety: IS Class I, Div1, Groups A, B, C, and D; Class I Zone 0, AEx ia IIC T4 Ga; Ex ia IIC T4 Ga; ll 1 G Ex ia IIC T4 Ga FCC, ISED and RED compliant TE CONNECTIVITY SENSORS /M5600 DATASHEET DOC CONTROL NUMBER: MSI07562 REVISION E Page 1 M5600 BLUETOOTH DIFFERENTIAL PRESSURE TRANSDUCER STANDARD RANGES Range (psi) 0 to 050 0 to 100 0 to 200 0 to 300 0 to 500 0 to 01k 0 to 03k 0 to 05k 0 to 10k 0 to 15k Range (Bar) 0 to 3.5 0 to 007 0 to 014 0 to 020 0 to 035 0 to 070 0 to 200 0 to 350 0 to 700 0 to 01k Gage • • • • • • • • • • Sealed Compound • • • • • • • • • • • • • • • Intermediate ranges available upon request. PERFORMANCE SPECIFICATIONS Ambient Temperature: 25°C (unless otherwise specified) For custom configurations, consult factory. Parameters Min Typ Max Units Supply Voltage 2.3 Accuracy -0.25 Resolution 3 Notes 3.6 VDC Replaceable CR2032/CR2050 battery 0.25 %F.S. RSS of linearity, hysteresis, and repeatability 0.00005 %F.S. Digital I2C Output Protocol A/D Resolution 24 Bit Operating frequency 2.4 GHz Cycle life 1.00E+6 0~FS Cycles Stability -0.25 0.25 %F.S./year Total Error Band -1 1 %F.S. Proof Pressure 2X 20k psi Rated Burst Pressure 5X 20k psi Rated Compensated Temperature -10 +60 °C -20 +60 °C CR2032 (Panasonic/Energizer) -20 +70 °C CR2032 (Sony/MuRata) -20 +85 °C CR2050W (MuRata) -40 +120 °C without battery Operating Temperature Storage Temperature Wireless Protocol Receiver Operating System Signal Pairing Distance Signal Transmission Distance Battery Life Low Battery Warning Weatherproof Pressure Port Material Enclosure Shock Vibration @25°C over compensated range BLE4.2 Android™ 4.3 or above, iOS 7 or above, Windows® XP/7 or above 65 feet 65 feet affected by receiver antenna and blocking objects 1-year typical CR2032 210mAH battery; 1 minute transmission interval. 2-years typical CR2050W 350mAH battery, 1 minute transmission interval. 2.5VDC, red battery symbol in app IP65 316L or 17-4PH Stainless Steel Port, 316L Stainless Steel Snubber Stainless Steel and PBT 50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A 10Hz to 55Hz, double amplitude 1.52mm, EIA-364-28F, Condition I Note: Battery life depends on its capacity, operating temperature and signal transmission interval. Temperature can impact battery capacity retention even in idle. Check battery specifications for more details. Factory default data transmission rate is 5sec, which can be adjusted from 100msec to 5sec in smartphone app or PC software. TE CONNECTIVITY SENSORS /M5600 DATASHEET DOC CONTROL NUMBER: MSI07562 REVISION E Page 2 M5600 BLUETOOTH DIFFERENTIAL PRESSURE TRANSDUCER COMPLIANCE EN 55032 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (4kV contact/8kV air) IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz); Shift