SB0794

Glass Wire Wound sensor Type GO          Temperature sensor Large temperature range From -200°C to +400°C High vibrations resistant Resistant to external forces and pressures Small dimensions Good temperature stability Abrasion resistance Good pull up force resistance of leads Resistance to aggressive environment (acid, oil, solvent) DESCRIPTION One or two platinum bands wounded on solid glass core and homogeneously sealed with external tube. FEATURES APPLICATIONS  Nominal Value: 100  at 0°C Tolerance according to IEC 60751: class W 0.3, W 0.15 and W 0.1 Temperature coefficient  = 3850 ppm/K Closer tolerances in restricted temperature ranges  Chemical and pharmaceutical industry  Food industry  Connection Wires: Platinum coated nickel wires  H.V.A.C.  The lead wires connection is pull up force resistant  Power generation plants  Housing Advise: Can be used in most of liquids without protection (water, oil, solvent, acid...).  Analytical equipment  Aerospace industry  Marine...  Options: - Lead wires length - Extension cable - Glass shape (diameter, length, bent) - Ohmic values GWW Type GO www.meas-spec.com 1/3 Rev0 September 2010 Glass Wire Wound sensor Type GO PERFORMANCE SPECIFICATIONS Type Desi- Referen gnation ce Nominal reference (Ohm at 0°C) 1Pt100 1Pt100 1Pt100 1Pt100 1Pt100 2Pt100 GO 1020 GO 1327 GO 1545 GO 2327 GO 3045 GO 4845 1Pt100 1Pt100 1Pt100 1Pt100 1Pt100 GO 1020 GO 1327 GO 1545 GO 2327 GO 3045 1Pt100 1Pt100 1Pt100 1Pt100 1Pt100 GO 1020 GO 1327 GO 1545 GO 2327 GO 3045 L WL D AL1 AL2 A (Dimensions in mm) Selfheating in air (K/mW) Response time (s) Water v = 0,4 m/s t0,5 t0,9 Tolerance Class W 0.3 = ± (0.3+0.005 ItI) From -196°C to + 400°C SB0789 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 SB0865 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 SB0862 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 SB0870 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 SB0873 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 SB0765 100 48 35 4,5 10 12 0,25 0,09 0,80 2,40 Tolerance Class W 0.15 = ± (0.15+0.002 ItI) From -100°C to + 250°C SB0794 100 10 6 2,0 15 - 0,25 0,26 0,14 0,35 SB0866 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 SB0863 100 15 9,5 4,5 15 - 0,25 0,09 0,80 2,40 SB0871 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 SB0874 100 30 21 4,5 15 - 0,25 0,09 0,80 2,40 Tolerance Class W 0.1 = ± (0.1+0.0017 ItI) From 0°C to + 150°C SB0795 100 10 6 2,0 15 - 0.25 0,26 0,14 0,35 SB0867 100 13 9 2,7 15 - 0,25 0,11 0,40 1,30 SB0864 100 15 9,5 4,5 15 - 0.25 0,09 0,80 2,40 SB0872 100 23 16 2,7 15 - 0,25 0,11 0,40 1,30 SB0875 100 30 21 4,5 15 - 0.25 0,09 0,80 2,40 Air v = 1 m/s t0,5 t0,9 7 13 16 13 16 16 21 25 40 25 40 40 7 13 16 13 16 21 25 40 25 40 7 13 16 13 16 21 25 40 25 40 VALUES FOR PT100 °C -200 -150 -100 -50 0 50 100 GWW Type GO Ohms 18.52 39.72 60.26 80.31 100 119.40 138.51 Ohms/°C 0.432 0.417 0.405 0.397 0.391 0.385 0.379 °C 150 200 250 300 350 400 www.meas-spec.com 2/3 Ohms 157.33 175.86 194.10 212.05 229.72 247.09 Ohms/°C 0.374 0.368 0.362 0.356 0.350 0.345 Rev0 September 2010 Glass Wire Wound sensor Type GO BLOCK DIAGRAM DIMENSIONAL TOLERANCES: L D AL A (length of body) (diameter of body) (connection wire length) (connection wire diameter) =  2mm =  0.2mm =  2mm =  0.02 mm ORDERING INFORMATION NORTH AMERICA MEAS - Shrewsbury 910 Turnpike Road Shrewsbury, MA 01545 United States +1 508-842-0516 +1 508-842-0342 temperature.cs.amer@measspec.com EUROPE ASIA MEAS - France 48, rue de Frégy 77610 Fontenay Trésigny France Tel: +33(0) 1 64 42 52 52 Fax: +33(0) 1 64 42 63 17 MEAS - (China) Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518107 China Tel: +86 755 33305088 Fax: +86 755 33305099 sales.ftny.fr@meas-spec.com temperature.cs.asia@measspec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. GWW Type GO www.meas-spec.com 3/3 Rev0 September 2010 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: SB0794 SB0865 SB0863 SB0789 SB0864 SB0871 SB0795 SB0873 SB0874 SB0862 SB0870 SB0765