TXR66SJ00-3624AI

TINEL-LOCK RING 3 CODE 66 - TINEL-LOCK BACKSHELL TXR66AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR66AB00-2012). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO: LITTON-VEAM VG5234 CONNECTORS, CIR SERIES, 06, 07 AND 08, LESS ALL BACKSHELLS. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 07/05/2015 CHECKED 07/05/2015 APPROVED K.SHEPPARD 01/06/2015 APPROVED H.SMITH 01/09/2015 REVISIONS LTR DESCRIPTION C REVISED PER ECO-14-001596 D REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 31/01/2014 01/09/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, 06, 07 AND 08, LESS ALL BACKSHELLS TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR66 D 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 24,80 26,50 35,00 XXXX A THREAD ØB ØK ØY ØS XXXX ØZ A THREAD ØB SILICONE O-RING PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 F 24,80 C D G 45° BACKSHELL - TYPE 2 45° BACKSHELL - TYPE 1 H W M 24,80 J E T 90° BACKSHELL - TYPE 1 H W 90° BACKSHELL - TYPE 2 19,50 T J E M 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 07/05/2015 CHECKED 07/05/2015 APPROVED K.SHEPPARD 01/06/2015 APPROVED H.SMITH 01/09/2015 REVISIONS LTR DESCRIPTION C REVISED PER ECO-14-001596 D REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 31/01/2014 01/09/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, 06, 07 AND 08, LESS ALL BACKSHELLS TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR66 D 2 TABLE 1 ORDER NUMBER 11 14 16 18 20 22 24 28 32 36 40 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE CONNECTOR SHELL SIZE 10SL 14S 16/16S 18 20 22 24 28 32 36 40 TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 28 A THREAD 5/8 - 24UNEF 3/4 - 20UNEF 7/8 - 20UNEF 1 - 20UNEF 1 1/8 - 18UNEF 1 1/4 - 18UNEF 1 3/8 - 18UNEF 1 5/8 - 18UNEF 1 7/8 - 16UN 2 1/16 -16UNS 2 5/16 -16UNS ØB MAX 23,1 26,4 31,0 34,3 37,4 40,6 43,7 50,0 56,4 62,7 69,1 MAX ENTRY 05 07 08 10 12 14 16 18 22 24 28 C ±0,5 20,3 21,3 23,1 24,6 25,9 26,4 27,2 27,7 29,2 30,5 32,0 D ±0,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 31,4 32,3 35,2 W ±0,5 29,7 32,8 34,8 39,1 41,4 45,0 48,3 52,3 58,4 64,5 73,2 T ±0,5 22,0 23,8 24,3 27,1 27,4 29,5 31,3 32,7 35,6 39,5 44,2 E ±0,5 26,50 27,95 29,45 31,00 32,70 34,25 35,80 38,90 42,00 44,70 49,10 T ±0,5 22,0 23,8 24,3 27,1 27,4 29,5 31,3 32,7 35,6 39,5 44,2 W MAX 30,2 33,3 35,3 39,6 41,9 45,5 48,8 52,8 58,9 65,0 73,7 E ±0,5 28,2 28,2 29,7 31,2 32,9 34,5 36,1 39,1 48,4 51,4 57,7 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE ØZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 44,45 ØS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 47,50 +/-0,08 ØY ± 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 52,00 ØK MAX NA NA 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 58,5 F ±0,5 NA NA 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 26,9 G ±0,5 NA NA 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 44,4 H ±0,5 NA NA 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 65,5 M ±0,5 NA NA 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 36,5 J ±0,5 NA NA 28,0 28,0 29,5 31,0 32,7 34,3 35,8 37,4 38,9 42,0 46,0 51,1 H ±0,5 NA NA 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 60,3 M ±0,5 NA NA 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 36,5 J ±0,5 NA NA 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 51,1 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 07/05/2015 CHECKED 07/05/2015 APPROVED K.SHEPPARD 01/06/2015 APPROVED H.SMITH 01/09/2015 REVISIONS LTR DESCRIPTION C REVISED PER ECO-14-001596 D REVISED PER ECO-15-011999 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 31/01/2014 01/09/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: VEAM "CIR" SERIES, 06, 07 AND 08, LESS ALL BACKSHELLS TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR66 D 3