UV-SCE
Ultra-Violet light,
Resistant
Heat Shrink Identification
Marker Sleeves
TECHNICAL DATASHEET
TTDS-255 Revision 4, March 2015
UV-SCE Ultra-Violet Light Resistant, Heat Shrink Identification Marker Sleeves for the
identification of wires and cables.
UV-SCE is presented as cut sleeves organised in ladder format.
Manufactured using a specially developed radiation cross-linked, UV Resistant material. UV-SCE
is designed specifically to allow customer to identify wires and cable in out door environments
where some exposure to UV light is possible.
UV-SCE Heat Shrink Identification Marker Sleeves are available as part of a complete
identification system. The system comprises specific printers, thermal transfer ribbons and
WINTOTAL software.
PAGE 1
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
RAIL /// TTDS-255 UV-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES
TECHNICAL DATA SHEET
TTDS-255
Features
• UV Resistant
• Good Temperature resistance
• Non-flame propagating
•
Resistant to key rail and industrial fluids including
diesel (defined by RW-2534)
•
Sleeve diameters from 3/32 to 1-1/2 (2.4 to
38.1mm)
•
Shrink ratio 3/32 is 3:1, all other sizes 2:1
Applications
• Pre-termination Cable Identification
• Suitable for locations where there is potential for exposure to UV light
• Suitable for installations that require outstanding fluid resistance,.
• Rail, Mass transit, Aerospace, Marine, Heavy Industrial and Energy
Temperature Rating
• Operating Temperature Range -55°C to 200°C (-67°F to 392°F)
Design For Environment
• Does not contain any declarable or prohibited substances from the UNIFE Railway Industry
Substances List
• Further information and a downloadable declaration covering RoHS and REACH compliance can be
found at the ‘TE Product Compliance Support Centre’:
http://www.te.com/en/resources/product-compliance.html
Specifications / Approvals
TE Connectivity Standard
RW-2534
Standards
EN45545-2 Requirements set R24, Hazard classification 3
BS EN 60068-2-11: Environmental testing—Part 2: Test KA: Salt Mist
NFT N46-019, method A. Thermoplastic or Vulcanised Rubber. Resistance to
Cracking—Static Elongation Test.
IEC 60068-2-5, procedure B. Environmental Testing Test SA: Simulated Solar
Radiation at Ground Level and Guidance for Solar Radiation Testing
Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit, form and function. Further details can be found in TE standard RW-2534.
PAGE 2
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
RAIL /// TTDS-255 UV-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES
TECHNICAL DATA SHEET
TTDS-255
Part Description
UV-SCE
-1K
-3/16
-2.0
-S1
-9
9
Color
S1
Scoring (Optional)
2.0
Sleeve Length (inch)
3/16
Expanded Inside Diameter (inch)
1K
Pack size
UV-SCE
Product family
Options
49mm Nominal
Pre-scoring
Sleeve
Width
Perforated score to produce multiple marker sleeves from each UV-SCE
sleeve.
Not scored
Code
Blank
1 Pre-score
Code
S1
Other score options available on request
Carrier
Packaging sizes
250 piece packs available for all sizes
1000 piece reels available for all sizes up
to 1 inch
1K
Colors
Perforaon
(oponal)
Code
Fixing
tape
Dimensions in mm (inches)
Yellow
4
White
9
Specify product name, pack size (leave blank for 250), sleeve size (in inches),
sleeve length (always 2.0), pre-score (leave blank if not required) and color
Ordering Information
Ordering description
Inside diameter
As supplied
After recovery
(minimum)
(Maximum)
mm
inches mm inches
Recommended cable diameter use
range
mm
inches
UV-SCE - - 3/32 - 2.0 - -
2.4
0.094
0.79
0.031
1.27 to 1.90
0.050 to 0.075
UV-SCE - - 1/8 - 2.0 - -
3.2
0.126
1.57
0.062
1.77 to 2.66
0.069 to 0.105
UV-SCE - - 3/16 - 2.0 - -
4.8
0.189
2.36
0.093
2.54 to 4.06
0.100 to 0.160
UV-SCE - - 1/4 - 2.0 - -
6.4
0.250
3.18
0.125
3.81 to 5.46
0.150 to 0.215
UV-SCE - - 3/8 - 2.0 - -
9.5
0.375
4.74
0.187
5.59 to 8.12
0.220 to 0.320
UV-SCE - - 1/2 - 2.0 - -
12.7
0.500
6.35
0.250
6.99 to 10.79
0.275 to 0.425
UV-SCE - - 3/4 - 2.0 - -
19.0
0.730
9.53
0.375 10.16 to 16.25
0.400 to 0.640
UV-SCE - - 1 - 2.0 - -
25.4
1.000
12.70
0.500 14.29 to 21.59
0.563 to 0.850
UV-SCE - 1-1/2 - 2.0 - -
38.1
1.500
19.05
0.750 20.95 to 33.02
0.825 to 1.300
PAGE 3
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
TE Proprietary Information
RAIL /// TTDS-255 UV-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES
TECHNICAL DATA SHEET
TTDS-255
Printer Information
Print quality and print performance can only be
guaranteed when specific TE printer and ribbons are
used.
The current list of printers and ribbons can be found in
TE document 411-121005 ‘Identification Printer Product
Ribbon Matrix’. This document can be found at the TE
document centre:
http://www.te.com/commerce/DocumentDelivery/
Software
Heat Shrink Identification Sleeves are fully supported by
WINTOTAL and PrintEasy label printing software,
available from the TE product store:
http://www.te.com/en/general/label-printing-software.html
Contact a TE representative for further information
te.com
TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or
company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration
purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or
completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set
forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be
liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product.
Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product
for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
PAGE 4
TE Proprietary Information
RAIL /// TTDS-255 UV-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES
UV-SCE-1K-3/8-2.0-4 价格&库存
很抱歉,暂时无法提供与“UV-SCE-1K-3/8-2.0-4”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 25+22.16281
- 150+21.78799
- 250+21.31644
- 450+20.92953
- 2000+20.55471
- 5000+14.77521