EM513

EM513 thru EM518 HIGH VOLTAGE PLASTIC RECTIFIER FEATURES ●Molded case feature for auto insertion ● High current capability ● Low leakage current ● High surge capability ● High temperature soldering guaranteed: REVERSE VOLTAGE - 1600 to 2000 Volts FORWARD CURRENT - 1.0 Amperes DO- 41 1.0(25.4) MIN. .034(0.9) DIA .028(0.7) 250℃/10sec/0.375" (9.5mm) lead length at 5 lbs tension .205(5.2) MAX MECHANICAL DATA ●Terminal: Plated axial leads solderable per MIL -STD 202E,method 208C ●Case: Molded with UL-94 Class V-O recognized flame retardant epoxy. ●Polarity: Color band denotes cathode ●Weight: 0.012 ounces , 0.34 grams ●Mounting position:Any 1.0(25.4) MIN. .107(2.7) DIA .080(2.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase,half wave, 60HZ, resistive or inductive load. For capacitive load,derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375" (9.5mm) Lead Lengths at Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Maximum Instantaneous Forward Voltage at Rated Formward Current @ TA=25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage Typical junction Capacitance (Note1 ) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range @TA=25℃ @TA=100℃ TA=75℃ SYMBOL VRRM VRMS VDC I(AV) EM513 1600 1120 1600 EM516 1800 1260 1800 1.0 EM518 2000 1400 2000 UNIT V V V A IFSM 30 A VF IR CJ RθJA TJ TSTG 1.1 5.0 50.0 10 50 -50 to+175 -50 to+175 V uA pF ℃/W ℃ ℃ NOTE:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2.Thermal Resistance from Junction of ambient at.375" (9.5mm) lead lengths. P.C.board mounted. ~ 41 ~ RATING AND CHARACTERISTIC CURVES EM513 thru EM518 FIG.2-TYPICAL FORWARD CHARACTERISTICS FIG. 1 – FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT,(A) 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 20 10 4.0 2.0 1.0 0.4 0.2 0.1 0.04 0.02 0.01 0.6 0.8 1.0 1.2 1.4 1.5 T J = 25℃ CPULSE WIDTH 300us 1%DUTY CYCLE AVERAGE FORWARD CURRENT AMPERES 0.8 0.6 0.4 0.2 0 25 50 75 10 0 125 150 175 AMBIENT TEMPERATURE () INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG. 3 – MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT AMPERES 50 40 30 20 10 0 1 2 4 10 20 40 100 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) FIG.6-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT MICROAMPERS 10 4 1.0 0.4 0.1 0.04 TJ = 25℃ 0.01 0 20 40 60 80 100 120 TJ = 100℃ 140 NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTGE,(%) FIG.5 – TYPICAL JUNCTION CAPACITANCE 100 40 CAPACITANCE, (pF) 20 10 TJ = 25℃ f = 1.0 MHz 4 2 1 0.1 0.2 0.4 1 2 4 10 20 40 100 REVERSE VOLTAGE,VOLTS ~ 42 ~