MBR1080

MBR1030 thru MBR10100 SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 30 to 100Volts FORWARD CURRENT - 10.0 Amperes TO-220AC .108 (2.75) .413(10.5) .374(9.5) .153(3.9) .146(3.7) .187(4.7) .148(3.8) .055(1.4) .047(1.2) FEATURES ●Metal of silicon rectifier , majority carrier conduction ●Guard ring for transient protection ●Low power loss,high efficiency ●High current capability,low VF ●High surge capacity ●Plastic package has UL flammability .270(6.9) .230(5.8) .610(15.5) .583(14.8) .04 MAX (1.0) classification 94V-0 ●For use in low voltage,high frequency inverters,free wheeling,and polarity protection applications MECHANICAL DATA ●Case: TO-220AC molded plastic ●Polarity: As marked on the body .051 (1.3) .043(1.1) .032(0.8) .102(2.6) .091(2.3) .157 .583(14.8) (4.0) .531(13.5) ●Weight: 0.08ounces,2.24 grams ●Mounting position :Any .024(0.6) .012(0.3) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current ( See Fig.1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Peak Forward Voltage (Note1) IF=10A @TJ=25℃ IF=10A @TJ=125℃ IF=20A @TJ=25℃ IF=20A @TJ=125℃ Maximum DC Reverse Current at Rated DC Bolcking Voltage @TJ=25℃ @TJ=125℃ SYMBOL VRRM VRMS VDC I(AV) MBR1030 MBR1040 MBR1050 MBR1060 MBR1080 MBR10100 30 21 30 40 28 40 50 35 50 10.0 60 42 60 80 56 80 100 70 100 UNIT V V V A IFSM 0.70 VF 0.57 0.84 0.72 IR CJ RθJC TJ TSTG 0.1 15 400 2.5 150 0.80 0.70 0.95 0.85 0.1 10 0.85 0.71 0.1 6.0 1100 2.0 -55 to +150 -55 to +175 A V mA pF ℃/W ℃ ℃ Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES:1.300us pulse width,2% duty cycle. 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to case. ~ 236 ~ RATING AND CHARACTERTIC CURVES MBR1030 thru MBR10100 FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 300 250 200 150 100 50 0 1 2 10 20 50 5 NUMBER OF CYCLES AT 60Hz 100 PULSE WIDTH 8.3 ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) FIG. 1 – FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 10.0 8.0 6.0 4.0 2.0 0 MBR1080 MBR10100 MBR1030 MBR1060 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 175 CASE TEMPERATURE (℃) FIG.3-TYPICAL REVER CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT(mA) MBR1030 - MBR1060 MBR1080 - MBR10100 FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 100 MBR1030 - MBR1040 10 MBR1050 - MBR1060 10 T J=125℃ 1.0 T J=75℃ 1.0 MBR1080 - MBR10100 0.1 T J=25℃ T J = 25°C PULSE WIDTH 300us 2% DUTY CYCLE 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 – TYPICAL JUNCTION CAPACITANCE 10000 MBR1080 - MBR10100 CAPACITANCE, (pF) 1000 MBR1030 - MBR1060 100 T J = 25°C f = 1 MHz 0.1 1 4 10 REVERSE VOLTAGE ,VOLTS 100 ~ 237 ~