MBR1630CT

MBR1630CT thru MBR16150CT SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 30 to 150Volts FORWARD CURRENT - 16.0 Amperes TO-220AB .108 (2.75) .413(10.5) .374(9.5) .153(3.9) .146(3.7) .187(4.7) .148(3.8) .055(1.4) .047(1.2) FEATURES ●Metal of silicon rectifier , majority carrier conduction ●Guard ring for transient protection ●Low power loss,high efficiency ●High current capability,low VF ●High surge capacity ●Plastic package has UL flammability .270(6.9) .230(5.8) .610(15.5) .583(14.8) classification 94V-0 ●For use in low voltage,high frequency inverters,free wheeling,and polarity protection applications MECHANICAL DATA ●Case: TO-220AB molded plastic ●Polarity: As marked on the body .051 (1.3) .043(1.1) .032(0.8) .102(2.6) .091(2.3) .157 .583(14.8) (4.0) .531(13.5) ●Weight: 0.08ounces,2.24 grams ●Mounting position :Any .024(0.6) .012(0.3) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current ( See Fig.1) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Peak Forward Voltage (Note1) IF=8A @TJ=25℃ IF=8A @TJ=125℃ IF=16A @TJ=25℃ IF=16A @TJ=125℃ Maximum DC Reverse Current at Rated DC Bolcking Voltage @TJ=25℃ @TJ=125℃ SYMBOL VRRM VRMS VDC I(AV) MBR 1630CT 30 21 30 MBR 1640CT 40 28 40 MBR 1650CT 50 35 50 MBR 1660CT 60 42 60 16.0 MBR MBR MBR 1680CT 16100CT 16150CT 80 56 80 100 70 100 150 105 150 UNIT V V V A IFSM 0.84 VF 0.57 0.72 IR CJ RθJC TJ TSTG 0.3 10 400 0.75 0.65 - 150 0.85 0.75 0.95 0.85 0.1 5.0 200 3.0 -55 to +150 -55 to +175 1.05 0.92 - A V mA pF ℃/W ℃ ℃ Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES:1.300us pulse width,2% duty cycle. 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to case. ~ 260 ~ RATING AND CHARACTERTIC CURVES MBR1630CT thru MBR16150CT FIG. 1 – FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 16.0 AVERAGE FORWARD CURRENT AMPERES FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT 300 250 200 150 100 50 0 1 2 10 20 50 5 NUMBER OF CYCLES AT 60Hz 100 PULSE WIDTH 8.3 ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 12.0 8.0 4.0 0 25 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 50 75 100 125 150 175 CASE TEMPERATURE (℃) FIG.3-TYPICAL REVER CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT(mA) MBR1630CT - MBR1660CT MBR1680CT - MBR16150CT FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 MBR1630CT MBR1640CT 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 10 T J=125℃ MBR1650CTMBR1660CT MBR1680CT MBR16100CT 1.0 MBR16150CT 1.0 T J = 25°C PULSE WIDTH 300us 2% DUTY CYCLE 0.1 T J=25℃ 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 – TYPICAL JUNCTION CAPACITANCE 1000 MBR1630CT MBR1660CT CAPACITANCE, (pF) MBR1680CT MBR16150CT 100 T J = 25°C f = 1 MHz 10 0.1 1 4 10 REVERSE VOLTAGE ,VOLTS 100 ~ 261 ~