RH105

RH101 thru RH105 SURFACE MOUNT GLASS PASSIVATED BARRIER RECTIFIERS FEATURES ●Rating to 1000V PRV ●Ideal for printed circuit board ●Reliable low cost construction utilizing REVERSE VOLTAGE - 100 to 1000 Volts FORWARD CURRENT - 0.8 Amperes MBS .275(7.0)MAX .067(1.7) .057(1.3) .051(1.3) .035(0.9) .165(4.2) .150(3.8) molded plastic technique results in inexpensive product ●Lead tin plated copper ~~ +.031(0.8) .019(0.5) .106(2.7) .09(2.3) .193(4.9) .177(4.5) .014(.35) .006(.15) MECHANICAL DATA ●Polarity:Symbol molded on body ●Weight: 0.0044 ounces,0.125 grams ●Mounting position :Any .043(1.1) .027(0.7) .067(1.7) .057(1.3) .106(2.7) .09(2.3) .008(0.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Note 1) Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load(JEDEC Method) Peak Forward Voltage at 0.8A DC Maximum DC Reverse Current at Rated DC Bolcking Voltage I2t Rating for Fusing (t＜8.3ms) Maximum Reverse Recovery Time Tyical Junction Capacitance Per Element Tyical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range NOTES:1.Mounted on P.C. board. (Note2) @TJ=25℃ @TJ=125℃ @TA=40℃ SYMBOL VRRM VRMS VDC I(AV) RH101 100 70 100 RH102 200 140 200 RH103 400 280 400 0.8 RH104 600 420 600 RH105 800 560 800 UNIT V V V A IFSM VF IR I2t TRR CJ RθJC TJ TSTG 150 40 1.15 5.0 500 3.7 250 13 75 -55 to +150 -55 to +150 500 A V uA A2s nS pF ℃/W ℃ ℃ 2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to ambient. ~ 215 ~ RATING AND CHARACTERTIC CURVES RH101 thru RH105 FIG.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT AMPERES 1.0 AVERAGE FORWARD CURRENT AMPERES 0.8 0.6 0.4 0.2 0.1 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE, MOUNTED ON BOARD SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.2-MAXIMUM NON-REPETITVE SURGE CURRENT 40 30 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 20 10 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60HZ FIG.4-TYPICAL FORWARD CHARACTERISTICS 10 FIG.3-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT,(mA) INSTANTANEOUS FORWARD CURRENT,(A) 10 TJ=125℃ T J=125℃ 1.0 1.0 T J =25℃ TJ=25℃ 0.1 0.1 T J=25℃ PULSE WIDTH 300us 0.01 0 20 40 60 80 100 120 140 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 PERCENT OF RATED PEAK REVERSE VOLTAGE，(%) INSTANTANEOUS FORWARD VOLTAGE， VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE( PF) 10 T J=25℃ ，f=1MHZ 1.0 1 4 10.0 100 REVERSE VOLTAGE， VOLTS ~ 216 ~