RS204

RS201 thru RS207 SILICON BRIDGE RECTIFIERS REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes RS-2 FEATURES ● Surge overload rating -50 amperes peak ●Ideal for printed circuit board ●Reliable low cost construction utilizong molded plastic .551(14.0) .512(13.0) .610(15.5) .571(14.5) .709(19.0) .669(17.0) technique results in expensive product ●Mounting position :Any ●Lead: Sliver plated copper lead .035(0.9)DIA .028(0.7)TYP. .750 MIN. (19.0) .160(4.1) .140(3.6) .276(7.0) .236(6.0) .148(3.75) .108(2.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375″（9.5mm) Lead Lengths Peak Forward Surage Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25℃ TA=100℃ @TA=40 ℃ SYMBOL VRRM VRMS VDC I(AV) RS201 50 35 50 RS202 100 70 100 RS203 200 140 200 RS204 400 280 400 2.0 RS205 600 420 600 RS206 800 560 800 RS207 1000 700 1000 UNIT V V V A IFSM I2t VF IR CJ TJ TSTG 50 15.0 1.1 10.0 1.0 30 -55 to +125 -55 to +125 A A2s V uA mA pF ℃ ℃ Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. ~ 249 ~ RATING AND CHARACTERISTIC CURVES RS201 thru RS207 FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 2.0 PEAK FORWARD SURGE CURRENT AMPERES 60 50 40 30 20 10 0 1 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT T A=25℃ SINGLE SINE-WAVE JEDEC METHOD 0 50 100 150 AMBIENT TEMPERATURE ,℃ 10 NUMBER OF CYCLES AT 60HZ FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 100 FIG.3-TYPICAL FORWARD CHARACTERISTICS 10 6.0 INSTANTANEOUS REVERSE CURRENT MICROAMPERES 4.0 T J=100℃ 2.0 1.0 0.6 0.4 0.2 0.1 0.06 0.04 0.02 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 T J=25℃ PULSE WIDTH:300μS 1% DUTY CYCLE T J=25℃ INSTANTANEOUS FORWARD VOLTAGE. INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 40 CAPACITANCE,(pF) 20 10 6.0 4.0 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 T J=25℃, f=1MHZ Vsig=50m p-p REVERSE VOLTAGE,VOLTS ~ 250 ~