SF0070BA03046S

Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE 70 MHz Bandpass Filter 0.5 MHz bandwidth Part Number SF0070BA03046S Horizontal: 1 MHz/div Vertical (from top): Magnitude Phase Deviation Group Delay Variation 10 & 1 5 500 dB/div deg/div ns/div SPECIFICATION Parameter Center Frequency (FC)1 Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Ripple Phase Deviation from Linear Group Delay Variation Absolute Delay Substrate Material Temperature Coefficient Operating Temperature Range Notes: (60% of 3 dB Bandwidth) (60% of 3 dB Bandwidth) Min 69.95 0.35 0.50 Typ 70 9.3 0.45 0.64 1.24 0.48 3.1 340 1.46 Quartz ∆F/F=-[(T-To)/5.4] 2 Max 70.05 9.5 Units MHz dB MHz MHz 1.4 1 6.75 500 MHz dB p-p deg p-p ns p-p µs ppm - 25 - °C 1. Average of lower and upper 3 dB frequencies. Rev X6 14-Apr-05 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3 Integrated Circuit Systems, Inc. PACKAGE OUTLINE 70 MHz Bandpass Filter 0.5 MHz bandwidth Part Number SF0070BA03046S Units: mm Pin Configuration: Input: 10 Input Return: 1 Output: 5 Output Return: 6 Ground: 2,3,4,7,8,9 MATCHING CIRCUIT 10 5 1 6 Typical component values: Minimum Q = 40 Ls1 = 560 nH Cp1 = 68 pF Ls2 = 560 nH Cp2 = 91 pF Notes • Maximum 5% tolerance matching components shall be used. • Tuning values shown are for reference only. Optimum values may change depending upon board layout. ISO 9001 Registered Rev X6 14-Apr-05 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3