SF0836BA02513S

Integrated Circuit Systems, Inc. DESCRIPTION 836.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0836BA02513S Miniature 824 to 849 MHz surface acoustic wave (SAW) bandpass filter in a 3.0x3.0 mm LCC package to be used as an RF front end filter in cellular phone equipment. TYPICAL PERFORMANCE Rev X1 25-May-05 Page 1 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc. 836.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0836BA02513S MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level Max. D. C. Voltage between Each Terminal Min -40 -40 Max +85 +85 +23 10 Units ºC ºC dBm V SPECIFICATION Parameter Center Frequency FC Bandwidth Insertion Loss1 Passband Amplitude Ripple1 Stopband Rejection2, DC to 800 MHz Stopband Rejection2, 869 to 894 MHz Stopband Rejection2, 978 to 1006 MHz Stopband Rejection2, 1050 to 2600 MHz Return Loss1 Terminating Impedance Notes: 1. Within passband: 824 to 849 MHz 2. Rejection relative to insertion loss Min 25 2.5 1.5 25 30 25 20 10 50 Typ 836.5 Max Units MHz MHz dB dB dB dB dB dB dB Ω// 0nF TEST CIRCUIT 50 ohm single-ended No matching circuit required Rev X1 25-May-05 Page 2 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc. 836.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0836BA02513S PACKAGE OUTLINE AND SUGGESTED PCB FOOTPRINT 3.0 X 3.0 MM, SMP SUGGESTED PCB FOOTPRINT PIN NO. 2 5 1, 3, 4, 6 DESCRIPTION INPUT OUTPUT GROUND NOTES: DIMENSIONS IN MM All specifications are believed to be accurate and reliable. However, ICS reserves the right to make changes without notice. © 2005 Integrated Circuit Systems, Inc. All rights reserved. Rev X1 25-May-05 Page 3 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx