G70F

T-1-3/4 (5 mm) Panel Mount Led Assembly, Flat-top G70F Series The G70F panel mount assembly is designed to snap into a nominal 1/4” hole from the front of the panel. The wires are UL 1061, 26 AWG, PVC insulated multi-strand wire with 3 mm ends stripped & tinned. The G70F is available in a variety of colors as well as a superbright lamp incorporating a built-in flashing circuit.(Order Code FSR) The G70F is ideal for applications where wide viewing angle and a low profile is desired. 1.5x4.5x0.2 3 pls 5.0 dia 7.1 dia 0.8 2.8 ±.5 11.3 6.1 dia L = total wire length Black Red Schematic Specify part desired as follows: G70F/Order Code-L (Wire length in inches; 6" and 24" are standard) For example: “G70F/FSR-24” designates a flashing superbright red lamp with 24" long wires attached. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Red Hi Eff Red TInted Diffused Resistor Required Green Yellow Super Red Order Code H I G Y FSR Peak λ (nm) 697 635 565 585 660 Typical Characteristics Vf (V) @If=20mA 2.1 2.0 2.1 2.0 3-5 Volts Iv (mcd) @If=10mA 0.5 3.0 3.0 3.0 Flashing 2Θ1/2 (Deg) 120 120 120 120 120 Recom. Op. If (mA) 5-10 10-20 10-20 10-20 4 Volts * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-49