G946B

T-1 LED Indicator, Right-angle, PCB Mount G946B Series www.ledidea.com The G946B is made up of 2 T-1 LED lamps assembled into a black plastic holder. The leads are formed at right angles to the light emitting side of the assembly for through hole mounting on PCBs. The design of the G946B holder maintains all external dimensions but will be cored in appropriate places to minimize sink marks. Material of the housing is black Nylon 6/6 with fiber, rated UL94V0. Please note that the dimensions are in inches. Pin Connection: .19 max .14 .28 .125 max +– (typ for single color) .85 max Red or yellow Anode .12 min + .150 .15 .100 .45 .600 .55 .15 Green Anode (typ for bi-color) Specify part desired as follows: G946B/Order Code LED1 + Order Code LED 2 For example: “G946B/H+G” designates a red LED on top with a green LED below. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Hi Eff Red TInted Diffused Resistor Required Green Yellow Orange Hi Eff Red Tinted Transparent High Brightness Green Yellow Hi Eff Red Tinted Diffused For 2mA Operation Green Yellow Hi Eff Red Tinted Diffused 5V Operation Green Yellow Red/Green White Diffused Bipolar, Bicolor Yellow/Green Red/Yellow Order Code I G Y O IT GT YT I2 G2 Y2 I5 G5 Y5 EG YG EY Peak λ (nm) 635 565 585 610 635 565 585 635 565 585 635 565 585 635/565 585/565 635/585 Typical Characteristics Vf (V) @If=20mA 2.0 2.1 2.0 2.0 2.0 2.1 2.0 2.0 2.1 2.0 2.0/2.1 2.0/2.1 2.0/2.0 Iv (mcd) @If=10mA 10 10 10 10 40 40 40 1.0 @ 2mA 1.0 @ 2mA 1.0 @ 2mA 10 10 10 4/4 4/4 4/4 2Θ1/2 (Deg) 60 60 60 60 40 40 40 60 60 60 60 60 60 90 90 90 Recom. Op. If (mA) 10-20 10-20 10-20 10-20 10-20 10-20 10-20 2-10 2-10 2-10 5V 5V 5V 10-20 10-20 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G