477RSS035M

RSS FEATURES +85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors For all general purpose applications I Suitable for dipped tantalum replacement I Small case sizes I Capacitance range: 1 µF to2200 µF I Voltage range: 6.3 WVDC to 50 WVDC I Solvent tolerant end seals standard SPECIFICATIONS Capacitance Tolerance ±20%at 120 Hz, 20°C Operating Temperature Range Dissipation Factor 120Hz, 20°C WVDC tan δ WVDC Impedance Ratio (Max.) @120Hz -25°C/20°C -40°C/20°C WVDC Leakage Current Time 6.3 .25 -40°C to +85°C 10 .2 16 .17 25 .15 35 .12 50 .10 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 4 50 2 4 ≤50WVDC 2 minutes .01 CV or 3 µA whichever is greater 1,000 hours, +85°C, with rated voltage Load Life Capacitance change Dissipation factor Leakage current ≤ 20% of initial measured value ≤ 200% of initial specified value ≤ initial specified value 500 hours at +85°C with no voltage applied. Units will meet load life specifications Shelf Life Frequency (Hz) Temperature (°C) 10K 1.65 100K 1.7 +85 1.0 +70 1.3 +60 1.5 +30 1.8 Ripple Current Multipliers 50 0.8 120 1.0 400 1.3 1K 1.45 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 46 RSS + 85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance (µF) WVDC PART NUMBER Maximum RMS Maximum Ripple Current ESR (mA) Ω 120Hz,+20°C 120Hz,+85°C 165.786 75.357 50.238 42.328 35.274 28.184 19.894 16.579 12.811 9.043 10.048 7.536 10 20 25 25 30 40 45 50 45 70 50 70 Dimensions DxL (mm) 4x7 4x7 4x7 4x7 5x7 4x7 5x7 6.3x7 5x7 6.3x7 5x7 6.3x7 Capacitance (µF) WVDC PART NUMBER Maximum Maximum RMS Ripple Current ESR (mA) Ω 120Hz,+20°C 120Hz,+85°C 7.055 5.997 4.145 2.487 1.989 1.507 1.281 0.882 0.423 0.282 0.199 0.153 80 80 90 135 160 165 202 238 524 655 1000 940 Dimensions DxL (mm) 5x7 6.3x7 6.3x7 8x9 10x9 8x9 10x9 10x9 12.5x15 12.5x15 16x15 16x15 1.0 2.2 3.3 4.7 4.7 10 10 10 22 22 33 33 50 50 50 35 50 16 35 50 16 35 10 25 105RSS050M 225RSS050M 335RSS050M 475RSS035M 475RSS050M 106RSS016M 106RSS035M 106RSS050M 226RSS016M 226RSS035M 336RSS010M 336RSS025M 47 47 100 100 100 220 220 470 470 1000 1000 2200 6.3 16 6.3 25 35 10 16 6.3 35 16 35 16 476RSS6R3M 476RSS016M 107RSS6R3M 107RSS025M 107RSS035M 227RSS010M 227RSS016M 477RSS6R3M 477RSS035M 108RSS016M 108RSS035M 228RSS016M Aluminum Electrolytic L PVC SLEEVE L 15.0 MIN L d + L1 19.0 MIN L L PHYSICAL DIMENSIONS (µF) WVDC (SV) 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63) 4x7 L L 1.0 2.2 3.3 4.7 10 22 33 47 100 220 470 1000 2200 Convert to inches, divide by 25.4 10x9 12.5x15 16x15 5x7 6.3x7 8x9 10x9 12.5x15 16x15 5x7 6.3x7 8x9 10x9 4x7 5x7 6.3x7 4x7 5x7 6.3x7 L 4x7 4x7 5x7 L L D1 L NOTE: Case Vent is standard on all diameter ≥8.0mm LEAD INFORMATION V.S. CASE DIAMETER D S DxL(mm) d B 4.0 1.5 0.45 0.5 5.0 2.0 0.45 0.5 6.3 2.5 0.45 0.5 8 3.5 0.6 0.5 10 5.0 0.6 0.5 12.5 5.0 0.6 0.8 16 7.5 0.8 0.5 L1=L+1.0 mm Max. D≤8 mm L1=L+1.5 mm Max. D≥10 mm D1=D+B Max. S1=S±0.5mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com L L 6.3x7 S1 47