ISM95-6251AH-25.000MHZ

2.5mm x 2.0mm Ceramic SMD Package Oscillator, CMOS ISM95 Series Product Features: Typical Applications: ● ● ● ● ● ● ● ● ● ● Low Jitter, Non-PLL Based Output Compatible with Lead free Processing Pb-free, Halogen-free, and Antimony-free RoHS and REACH compliant Fibre Channel Server & Storage Sonet / SDH 802.11 / WiFi T1/E1, T3/E3 System Clock ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 156.250MHz Frequency Stability ±10ppm Maximum ±15ppm Maximum ±20ppm Maximum ±25ppm Maximum ±50ppm Maximum ±100ppm Maximum Operating Temperature Range 0°C to +70°C, -10°C to +60°C, -10°C to +70°C, -20°C to +70°C, -30°C to +75°C, or -40°C to +85°C Supply Voltage (Vdd) 1.8V, 2.5V, 2.7V, 3.0V, 3.3V, 1.62V - 3.63V Input Current 20mA Maximum Output Logic Type CMOS Output Drive Capability 15pF Maximum 30pF Maximum Aging ±3ppm/year Maximum at +25°C Duty Cycle 50 ±5(%) or 50 ±10(%) Measured at 50% of waveform Rise / Fall Time 6nSec Maximum Measured from 20% to 80% of waveform Output Voltage Logic High 90% of Vdd Minimum Output Voltage Logic Low 10% of Vdd Maximum Pin 1 Connection Tri-State (High Impedance) Input Voltage Logic High 70% of Vdd Minimum or No Connect to Enable Output Input Voltage Logic Low 30% of Vdd Maximum to Disable Output (High Impedance) Standby Current 10µA Maximum Startup Time 10mSec Maximum RMS Phase Jitter 1pSec Maximum 12kHz to 20MHz offset frequency Period Jitter (RMS) 5pSec Maximum 20k adjacent periods Period Jitter (pk-pk) 50pSec Maximum 100k adjacent periods NOTES: Inclusive of Calibration Tolerance at 25°C, Frequency Stability over Operating Temperature Range, Supply Voltage Change, Output Load Change, and First Year Aging at 25°C. ±5% Disabled Output, High Impedance ● All minimum and maximum limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. ● A 0.1µF bypass capacitor is recommended between Vdd (pad 4) and GND (pad 2) to minimize power supply noise. ABSOLUTE MAXIMUM LIMITS Storage Temperature Range -55°C to +125°C Supply Voltage Range -0.3Vdc to Vdd +0.3Vdc Electrostatic Discharge 2000V Maximum Solder Temperature 260°C Maximum Junction Temperature 150°C Maximum NOTE: If the part is used beyond absolute maximum ratings, it may cause internal destruction. The part should be used under the recommended operating conditions or the reliability of this part may be damaged if those conditions are exceeded. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 08/16/18_C Page 1 of 4 2.5mm x 2.0mm Ceramic SMD Package Oscillator, CMOS ISM95 Series ENVIRONMENTAL SPECIFICATIONS Mechanical Shock MIL-STD-202, Method 213 Mechanical Vibration MIL-STD-202, Method 204 Resistance to Soldering Heat MIL-STD-202, Method 210 Solderability J-STD-002 Gross Leak MIL-STD-883, Method 1014 Fine Leak MIL-STD-883, Method 1014 Moisture Sensitivity Level MSL 1 (+260°C) MECHANICAL & SOLDER PAD LAYOUT DIMENSIONS PART NUMBER GUIDE Supply Voltage Operating Temperature Range Duty Cycle Output Drive Capability Frequency Stability Pin 1 Connection 3 = 3.3V 7 = 3.0V 2 = 2.7V 6 = 2.5V 1 = 1.8V 8 = 1.62V - 3.63V 1 = 0°C to +70°C 8 = -10°C to +60°C 6 = -10°C to +70°C 3 = -20°C to +70°C 4 = -30°C to +75°C 2 = -40°C to +85°C 5 = 50 ±5% 6 = 50 ±10% 1 = 15pF 6 = 30pF E = ±10ppm D = ±15ppm F = ±20ppm A = ±25ppm B = ±50ppm C = ±100ppm H = Tri-State O = N/C Series ISM95- Frequency -25.000 MHz Sample Part Number: ISM95-3251BH-20.000 MHz NOTES: ● ● ● ● Not all Frequency Stability options are available at all frequencies and Operating Temperature Ranges. Not all Output Drive Capability options are available at all frequencies. Not all Supply Voltage options are available at all frequencies. Please consult with Sales Department any other parameters or options. MARKING PACKAGE INFORMATION Line 1: ILSI, Date Code (YWW) Line 2: Frequency Termination = e4 (Au over Ni over W base metallization) Terminal Plating Thickness: Gold (0.3µm to 1.0µm), Nickel (1.27µm to 8.89µm) Pin 1 Dot ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 08/16/18_C Page 2 of 4 2.5mm x 2.0mm Ceramic SMD Package Oscillator, CMOS ISM95 Series TAPE & REEL DIMENSIONS PITCH TAPE WIDTH REEL DIA QTY PER REEL 4.00 8.00 180 3,000 All Dimensions in Millimeters TEST CIRCUIT: Enable/Disable Option WAVEFORM: Enable/Disable Option ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 08/16/18_C Page 3 of 4 2.5mm x 2.0mm Ceramic SMD Package Oscillator, CMOS ISM95 Series SOLDER REFLOW PROFILE Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Tate (TL to Tp Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Units are backward compatible with +240°C reflow process Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature Moisture Sensitivity Level (MSL) 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for 10 seconds 20 to 40 seconds 6ºC / second max 8 minute max Level 1 PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev: 08/16/18_C Page 4 of 4