BAT64_07

BAT64... Silicon Schottky Diodes • For low-loss, fast-recovery, meter protection, bias isolation and clamping application • Integrated diffused guard ring • Low forward voltage • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAT64 ! BAT64-02W BAT64-04 BAT64-04W ! BAT64-05 BAT64-05W ! BAT64-06 BAT64-06W !  , , , , , ,     ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAT64 BAT64-02W BAT64-04 BAT64-04W BAT64-05 BAT64-05W BAT64-06 BAT64-06W 1Pb-containing Package SOT23 SCD80 SOT23 SOT323 SOT23 SOT323 SOT23 SOT323 Configuration single single series series common cathode common cathode common anode common anode LS(nH) 1.8 0.6 1.8 1.4 1.8 1.4 1.8 1.4 Marking 63s 64 64s 64s 65s 65s 66s 66s package may be available upon special request 1 2007-06-11 BAT64... Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Diode reverse voltage Forward current Non-repetitive peak surge forward current (t ≤ 10ms) Average rectified forward current (50/60Hz, sinus) I FAV Total power dissipation Ptot BAT64, TS ≤ 86°C BAT64-02W, TS ≤ 121°C BAT64-04, BAT64-06, TS ≤ 61°C BAT64-04W, BAT64-06W, TS ≤ 111°C BAT64-05, TS ≤ 36°C BAT64-05W, TS ≤ 104°C Junction temperature Storage temperature Thermal Resistance Parameter Junction - soldering point 1) BAT64 BAT64-02W BAT64-04, BAT64-06, BAT64-04W, BAT64-06W BAT64-05 BAT64-05W 1For Symbol VR IF I FSM Value 40 250 800 120 Unit V mA mW 250 250 250 250 250 250 150 -55 ... 150 °C Tj T stg Symbol RthJS Value ≤ 255 ≤ 115 ≤ 355 ≤ 155 ≤ 455 ≤ 185 Unit K/W calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-06-11 BAT64... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter DC Characteristics Breakdown voltage I(BR) = 10 µA Reverse current VR = 30 V VR = 30 V, TA = 85 °C Forward voltage IF = 1 mA IF = 10 mA IF = 30 mA IF = 100 mA AC Characteristics Diode capacitance VR = 1 V, f = 1 MHz Reverse recovery time I F = 10 mA, IR = 10 mA, measured IR = 1 mA , RL = 100 Ω trr 5 ns CT 4 6 pF Symbol min. V(BR) IR VF 270 310 370 500 40 Values typ. max. - Unit V µA 320 385 440 570 2 200 mV 350 430 520 750 3 2007-06-11 BAT64... Diode capacitance CT = ƒ (VR) f = 1MHz 10 CT pF 8 7 6 5 4 3 2 1 0 0 10 20 V VR 30 10 -3 0 10 20 VR V 30 10 -2 10 -1 25 C 10 0 BAT 64... EHB00059 Reverse current IR = ƒ(VR) TA = Parameter BAT 64... EHB00058 ΙR 10 2 µA 10 1 TA = 125 C 85 C Forward current IF = ƒ (VF) TA = Parameter BAT 64... EHB00057 Forward current IF = ƒ (T S) BAT64W 300 ΙF 10 mA 2 mA 10 1 TA = -40 25 85 125 C C C C 200 IF 150 100 50 0 0 10 0 10 -1 10 -2 0 0.5 V VF 1 15 30 45 60 75 90 105 120 °C 150 TS 4 2007-06-11 BAT64... Forward current IF = ƒ (T S) BAT64-02W 300 Forward current IF = ƒ (T S) BAT64-04, BAT64-06 300 mA mA 200 200 IF 150 IF 150 100 100 50 50 0 0 90 105 120 °C 0 0 15 30 45 60 75 150 15 30 45 60 75 90 105 120 °C 150 TS TS Forward current IF = ƒ (T S) BAT64-04W, BAT64-06W 300 Forward current IF = ƒ (T S) BAT64-05 300 mA mA 200 200 IF 150 IF 150 100 100 50 50 0 0 90 105 120 °C 0 0 15 30 45 60 75 150 15 30 45 60 75 90 105 120 °C 150 TS TS 5 2007-06-11 BAT64... Forward current IF = ƒ (T S) BAT64-05W 300 Permissible Puls Load R thJS = ƒ (tp) BAT64-02W 10 3 K/W mA 10 2 200 RthJS IF 150 10 1 100 10 0 50 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 0 0 15 30 45 60 75 90 105 120 °C 150 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 TS tP Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BAT64-02W 10 2 Permissible Puls Load R thJS = ƒ (tp) BAT64-04W, BAT64-06W 10 3 K/W IFmax/IFDC 10 2 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 RthJS 10 1 10 0 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tP tP 6 2007-06-11 BAT64... Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BAT64-04W, BAT64-06W 10 2 10 3 K/W Permissible Puls Load R thJS = ƒ (tp) BAT64-05W I Fmax/IFDC - 10 2 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 R thJS 10 1 10 0 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tP tP Permissible Pulse Load IFmax / I FDC = ƒ (tp ) BAT64-05W 10 2 IFmax/IFDC - 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 7 2007-06-11 Package SCD80 BAT64... Package Outline 0.2 0.8 ±0.1 10˚MAX. M A +0.05 0.13 -0.03 A 7˚ ±1.5˚ 1.3 ±0.1 2 1.7 ±0.1 0.7 ±0.1 Foot Print 1.45 0.35 Marking Layout (Example) 2005, June Date code 0.35 BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Standard 4 Reel with 2 mm Pitch 2 0.2 1.45 2.5 8 0.2 ±0.05 Cathode marking 1 0.3 ±0.05 Cathode marking 0.4 0.9 Cathode marking 0.7 8 2007-06-11 BAT64... Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code M onth 2 0 03 01 02 03 04 05 06 07 08 09 10 11 12 a b c d e f g h j k l n 2 0 04 p q r s t u v x y z 2 3 2005 A B C D E F G H J K L N 2006 P Q R S T U V X Y Z 4 5 2 0 07 a b c d e f g h j k l n 2008 p q r s t u v x y z 2 3 2009 A B C D E F G H J K L N 2010 P Q R S T U V X Y Z 4 5 2011 a b c d e f g h j k l n 2012 p q r s t u v x y z 2 3 2 0 13 A B C D E F G H J K L N 2014 P Q R S T U V X Y Z 4 5 1 ) New Marking Layout for SC75, implemented at October 2005. . 9 2007-06-11 Package SOT23 BAT64... Package Outline 0.15 MIN. 1 ±0.1 0.1 MAX. 1.3 ±0.1 2.9 ±0.1 3 B 2.4 ±0.15 10˚ MAX. 0.4 +0.1 -0.05 1) 1 2 10˚ MAX. C 0.95 1.9 0.08...0.1 A 5 0...8˚ 0.25 M B C 0.2 M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s Pin 1 0.9 1.3 2005, June Date code (YM) BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.9 2.13 2.65 0.2 8 Pin 1 3.15 1.15 10 2007-06-11 Package SOT323 BAT64... Package Outline 2 ±0.2 0.3 +0.1 -0.05 3 1.25 ±0.1 2.1 ±0.1 0.9 ±0.1 3x 0.1 M 0.1 MAX. 0.1 A 1 0.65 0.65 2 0.1 MIN. 0.15 +0.1 -0.05 0.2 M A Foot Print 0.6 0.8 0.65 0.65 Marking Layout (Example) Manufacturer 1.6 2005, June Date code (YM) Pin 1 BCR108W Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 2.15 2.3 8 1.1 11 2007-06-11 BAT64... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 2007-06-11