BSO301SP

Preliminary data BSO301SP OptiMOS-P Small-Signal-Transistor Feature • P-Channel • Enhancement mode • Logic Level • 150°C operating temperature • Avalanche rated • dv/dt rated • Ideal for fast switching buck converter S S S G 1 2 3 4 Top View Product Summary VDS R DS(on) ID -30 8 -14.9 V mΩ A 8 7 6 5 D D D D SIS00062 Type BSO301SP Package SO 8 Ordering Code Q67042-S4086 Maximum Ratings, at Tj = 25 °C, unless otherwise specified Parameter Continuous drain current TA=25°C TA=70°C Symbol ID Value -14.9 -11.9 Unit A Pulsed drain current TA=25°C ID puls EAS dv/dt VGS Ptot Tj , Tstg -59.6 248 -6 ±20 2.5 -55... +150 55/150/56 mJ kV/µs V W °C Avalanche energy, single pulse ID =-14.9 A , VDD =-25V, RGS=25Ω Reverse diode dv/dt IS =-14.9A, VDS =-24V, di/dt=200A/µs, Tjmax =150°C Gate source voltage Power dissipation TA=25°C Operating and storage temperature IEC climatic category; DIN IEC 68-1 Page 1 2002-07-17 Preliminary data Thermal Characteristics Parameter Characteristics Symbol min. Values typ. BSO301SP Unit max. Thermal resistance, junction - soldering point SMD version, device on PCB: @ min. footprint, t < 10s @ 6 cm 2 cooling area 1) RthJS RthJA - - 35 110 50 K/W Electrical Characteristics , at Tj = 25 °C, unless otherwise specified Parameter Static Characteristics Drain-source breakdown voltage VGS =0, ID=-250µA Symbol min. V(BR)DSS VGS(th) IDSS IGSS RDS(on) RDS(on) -30 -1 Values typ. -1.5 max. -2 Unit V Gate threshold voltage, VGS = VDS ID =-250µA Zero gate voltage drain current VDS =-30V, VGS=0, Tj =25°C VDS =-30V, VGS=0, Tj =150°C µA -0.1 -10 -10 9.1 6.3 -1 -100 -100 12 8 nA mΩ Gate-source leakage current VGS =-20V, VDS =0 Drain-source on-state resistance VGS =-4.5V, ID =-12.1A Drain-source on-state resistance VGS =-10V, ID =-14.9A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical without blown air; t ≤10 sec. Page 2 2002-07-17 Preliminary data BSO301SP Electrical Characteristics, at Tj = 25 °C, unless otherwise specified Parameter Dynamic Characteristics Transconductance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time gfs Ciss Coss Crss td(on) tr td(off) tf VDD =-15V, VGS=-10V, ID =-1A, RG =6Ω çVDS ç≥2*çID ç*RDS(on)max , 22 ID =-11.9A VGS =0, VDS =-25V, f=1MHz Symbol Conditions min. Values typ. 44 4510 1140 950 17 26 161 120 max. 25 38 240 180 Unit S pF - ns Gate Charge Characteristics Gate to source charge Gate to drain charge Gate charge total Gate plateau voltage Qgs Qgd Qg VDD =-24V, ID =-14.9A, VGS =0 to -10V VDD =-24V, ID =-14.9A - -11 -40 -121 -2.4 -16 -61 -181 - nC V(plateau) VDD =-24V, ID =-14.9A V Reverse Diode Inverse diode continuous forward current Inv. diode direct current, pulsed ISM Inverse diode forward voltage VSD Reverse recovery time trr Reverse recovery charge Qrr VGS =0, |IF | = |ID | VR =-15V, |IF| = |lD |, diF /dt=100A/µs IS TA=25°C - -0.75 36 27 -3.3 -59.6 -1.2 45 34 A V ns nC Page 3 2002-07-17 Preliminary data BSO301SP 1 Power dissipation Ptot = f (TA ) 3.2 BSO301SP 2 Drain current ID = f (TA ) parameter: |VGS |≥ 10 V -16 BSO301SP W A 2.4 -12 Ptot 2 ID 20 40 60 80 100 120 -10 1.6 -8 1.2 -6 0.8 -4 0.4 -2 0 0 °C 160 0 0 20 40 60 80 100 120 °C 160 TA TA 3 Safe operating area ID = f ( VDS ) parameter : D = 0 , TA = 25 °C -10 2 BSO301SP 4 Transient thermal impedance ZthJS = f (tp ) parameter : D = tp /T tp = 290.0 µs = R ( DS on ) K/W 10 2 BSO301SP A 1 ms 10 1 -10 1 10 ms 10 0 Z thJS -10 0 ID 10 -1 D = 0.50 0.20 0.10 10 -2 -10 -1 DC 10 -3 0.05 0.02 10 -4 single pulse 0.01 -10 -2 -1 -10 -10 0 -10 1 V -10 2 10 -5 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 VDS Page 4 tp 2002-07-17 Preliminary data BSO301SP 5 Typ. output characteristic ID = f (VDS ) parameter: Tj =25°C 50 6 Typ. drain-source on resistance RDS(on) = f (ID ) parameter: VGS 20 Vgs= -3.5V 35 30 25 20 15 RDS(on) A -10V -6V -5.5V 40 -5V -4.5V -4V - ID mΩ 16 Vgs = - 3,5V Vgs = - 4V Vgs = - 4.5V Vgs= - 5V Vgs = - 6V Vgs = - 10V 14 12 Vgs= -3V 10 8 10 5 0 0 Vgs= -2.5V 6 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 V1 - VDS 4 6 10 14 18 22 26 30 34 A 40 - ID 7 Typ. transfer characteristics ID= f ( VGS ); |VDS|≥ 2 x |ID| x RDS(on)max parameter: Tj = 25 °C -30 8 Typ. forward transconductance gfs = f(ID) parameter: Tj = 25 °C 80 S A 60 g fs -0.5 -1 -1.5 -2 -2.5 -3.5 ID -20 50 -15 40 30 -10 20 -5 10 0 0 V 0 0 -5 -10 -15 -20 A ID -30 VGS Page 5 2002-07-17 Preliminary data BSO301SP 9 Drain-source on-resistance RDS(on) = f(Tj ) parameter: ID = -14.9 A, VGS = -10 V 12 10 Typ. gate threshold voltage VGS(th) = f (Tj) parameter: VGS = VDS -2.5 mΩ 10 V V GS(th) 98% max. RDS(on) 9 8 7 6 5 4 3 typ. -1.5 typ. -1 min. -0.5 2 1 0 -60 -20 20 60 100 °C 160 Tj 0 -60 -20 20 60 100 °C 160 Tj 11 Typ. capacitances C = f (VDS) parameter: VGS =0, f=1 MHz, Tj = 25 °C 10 4 12 Forward character. of reverse diode IF = f (VSD) parameter: Tj , tp = 80 µs -10 2 BSO301SP Ciss pF A -10 1 Coss 10 3 C Crss -10 0 IF Tj = 25 °C typ Tj = 150 °C typ Tj = 25 °C (98%) Tj = 150 °C (98%) 10 2 0 -10 -1 0 5 10 15 20 V 30 -0.4 -0.8 -1.2 -1.6 -2 -2.4 V -3 - VDS VSD Page 6 2002-07-17 Preliminary data BSO301SP 13 Typ. avalanche energy EAS = f (Tj ); par.: ID = -14.9 A VDD = -25 V, RGS = 25 Ω 300 14 Typ. gate charge VGS = f (QGate) parameter: ID = -14.9 A pulsed -16 V BSO301SP mJ -12 E AS 200 VGS -10 150 -8 0.2 V DS max 0.5 VDS max -6 100 -4 50 -2 0.8 VDS max 0 25 50 75 100 °C Tj 150 0 0 20 40 60 80 100 120 140 nC 180 |QGate | 15 Drain-source breakdown voltage V(BR)DSS = f (Tj ) -36 BSO301SP V V (BR)DSS -34 -33 -32 -31 -30 -29 -28 -27 -60 -20 20 60 100 °C 180 Tj Page 7 2002-07-17 Preliminary data Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. BSO301SP Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 8 2002-07-17