SLR2016

SLR2016 HIGH EFFICIENCY RED SLO2016 GREEN SLG2016 YELLOW SLY2016 RED X/Y Stackable 0.180" 4-Digit 5 x 7 Dot Matrix Alphanumeric Intelligent Display® Devices with Memory/Decoder/Driver Dimensions in inches (mm) 0.100 (2.54) 0.197 (3 pl.) (5.00) 0.400 ± .015 (10.16 ± .38) 0.012 (.3) ± .002 (.05) 0.300 ± .020 (7.62 ± .51) 0.180 (4.57) 0.784 (19.91) Part Number 0.200 (5.08) SLX2016 OSRAM 0.150 (3.81) EIA Date Code Luminous Intensity Code XXYY Z 0.160 ± .020 (4.06 ± .51) FEATURES • Very Close Multi-line Spacing, 0.4" Centers • 0.180" 5 x 7 Dot Matrix Characters • 128 Special ASCII Characters for English, German, Italian, Swedish, Danish, and Norwegian Languages • Wide Viewing Angle: X axis 50° Maximum, Y Axis ±75° Maximum • Fast Access Time, 110 ns at 25°C • Full Size Display for Stationary Equipment • Built-in Memory • Built-in Character Generator • Built-in Multiplex and LED Drive Circuitry • Direct Access to Each Digit Independently and Asynchronously • Clear Function that Clears Character Memory • True Blanking for Intensity Dimming Applications • End-stackable, 4-Character Package • Intensity Coded for Display Uniformity • Extended Operating Temperature Range: –40°C to +85°C • Superior ESD Immunity • 100% Burned-in and Tested • Wave Solderable • TTL Compatible over Operating Temperature Range See Appnotes 18, 19, 22, and 23 at www.infineon.com/ opto for additional information. Pin 1 Indicator 0.018 (.46) .100 (2.54) Non-cumulative (12 pl.) Tolerance: ±.010 (.25) DESCRIPTION The SLR/SLO/SLG/SLY2016 is a four digit 5 x 7 dot matrix display module with a built-in CMOS integrated circuit. This display is X/Y stackable. The integrated circuit contains memory, a 128 ASCII ROM decoder, multiplexing circuitry and drivers. Data entry is asynchronous. A display system can be built using any number of SLR/SLO/SLG/SLY2016 since each digit can be addressed independently and will continue to display the character last stored until replaced by another. System interconnection is very straightforward. Two address bits (A0, A1) are normally connected to the like-named inputs of all displays in the system. Data lines are connected to all SLR/SLO/SLG/SLY2016s directly and in parallel as is the write line (WR). The display will then behave as a write-only memory. The SLR/SLO/SLG/SLY2016 has several features superior to competitive devices. 100% burn-in processing insures that the SLR/SLO/SLG/ SLY2016 will function in more stressful assembly and use environments. True “blanking” allows the designer to dim the display for more flexibility of display presentation. Finally the CLR clear function will clear the ASCII character RAM.  2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA www.infineon.com/opto • 1-888-Infineon (1-888-463-4636) OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany www.osram-os.com • +49-941-202-7178 1 March 23, 2000-01 DESCRIPTION (continued) The character set consists of 128 special ASCII characters for English, German, Italian, Swedish, Danish, and Norwegian. All products are 100% burned-in and tested, then subjected to out-going AQL’s of .25% for brightness matching, visual alignment and dimensions, .065% for electrical and functional. Maximum Ratings DC Supply Voltage .........................................–0.5 V to +7.0 Vdc Input Voltage, Respect to GND (all inputs)............................................–0.5 V to VCC +0.5 Vdc Operating Temperature .....................................–40 °C to +85°C Storage Temperature.......................................–40 °C to +100°C Relative Humidity at 85°C ...................................................85% Maximum Solder Temperature, 0.063" (1.59 mm) below Seating Plane, t