HIN211

® HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Data Sheet July 27, 2005 FN3980.18 +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors The HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The family of devices offers a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table). The HIN206, HIN211 and HIN213 feature a low power shutdown mode to conserve energy in battery powered applications. In addition, the HIN213 provides two active receivers in shutdown mode allowing for easy “wakeup” capability. The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V input, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection. Features • Pb-Free Plus Anneal Available (RoHS Compliant) (See Ordering Info) • Meets All RS-232E and V.28 Specifications • Requires Only 0.1µF or Greater External Capacitors • High Data Rate. . . . . . . . . . . . . . . . . . . . . . . . . . .120kbit/s • Two Receivers Active in Shutdown Mode (HIN213) • Requires Only Single +5V Power Supply • Onboard Voltage Doubler/Inverter • Low Power Consumption (Typ) . . . . . . . . . . . . . . . . . 5mA • Low Power Shutdown Function (Typ) . . . . . . . . . . . . .1µA • Three-State TTL/CMOS Receiver Outputs • Multiple Drivers - ±10V Output Swing for +5V lnput - 300Ω Power-Off Source Impedance - Output Current Limiting - TTL/CMOS Compatible - 30V/µs Maximum Slew Rate • Multiple Receivers - ±30V Input Voltage Range - 3kΩ to 7kΩ Input Impedance - 0.5V Hysteresis to Improve Noise Rejection Applications • Any System Requiring RS-232 Communications Port - Computer - Portable, Mainframe, Laptop - Peripheral - Printers and Terminals - Instrumentation - Modems Selection Table PART NUMBER HIN202 HIN206 HIN207 HIN208 HIN211 HIN213 POWER SUPPLY VOLTAGE +5V +5V +5V +5V +5V +5V NUMBER OF RS-232 DRIVERS 2 4 5 4 4 4 NUMBER OF RS-232 RECEIVERS 2 3 3 4 5 5 NUMBER OF 0.1µF EXTERNAL CAPACITORS 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors LOW POWER SHUTDOWN/TTL THREE-STATE No/No Yes/Yes No/No No/No Yes/Yes Yes/Yes NUMBER OF RECEIVERS ACTIVE IN SHUTDOWN 0 0 0 0 0 2 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2001-2005. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Ordering Information PART NO. HIN202CB HIN202CB-T HIN202CBZ (See Note) HIN202CBZ-T (See Note) HIN202CBN HIN202CBN-T HIN202CBNZ (See Note) HIN202CBNZ-T (See Note) HIN202CP HIN202IB HIN202IBZ (See Note) HIN202IBN HIN202IBN-T HIN202IBNZ (See Note) HIN202IBNZ-T (See Note) HIN206CB HIN207CA HIN207CAZ (See Note) HIN207CAZ-T (See Note) HIN207CB HIN207CB-T TEMP. RANGE (°C) 0 to 70 0 to 70 0 to 70 0 to 70 PACKAGE 16 Ld SOIC (W) 16 Ld SOIC (W) Tape and Reel 16 Ld SOIC (W) (Pb-free) 16 Ld SOIC (W) Tape and Reel (Pb-free) 16 Ld SOIC (N) 16 Ld SOIC (N) Tape and Reel 16 Ld SOIC (N) (Pb-free) 16 Ld SOIC (N) Tape and Reel (Pb-free) 16 Ld PDIP 16 Ld SOIC (W) 16 Ld SOIC (W) (Pb-free) 16 Ld SOIC (N) 16 Ld SOIC (N) Tape and Reel 16 Ld SOIC (N) (Pb-free) 16 Ld SOIC (N) Tape and Reel (Pb-free) 24 Ld SOIC 24 Ld SSOP 24 Ld SSOP (Pb-free) 24 Ld SSOP Tape and Reel (Pb-free) 24 Ld SOIC 24 Ld SOIC Tape and Reel PKG. DWG. # M16.3 M16.3 M16.3 M16.3 Ordering Information (Continued) PART NO. HIN208CB HIN208CB-T HIN208CBZ (See Note) HIN208CBZ-T (See Note) HIN211CA HIN211CA-T HIN211CAZ (See Note) HIN211CAZ-T (See Note) HIN211CB HIN211CB-T HIN211CBZ (See Note) M16.15 M16.15 M16.15 M16.15 HIN213CAZ (See Note) M24.3 M24.209 M24.209 M24.209 HIN213CAZ-T (See Note) 0 to 70 28 Ld SSOP Tape and Reel (Pb-free) M28.209 0 to 70 HIN211CBZ-T (See Note) HIN213CA HIN213CA-T 0 to 70 28 Ld SOIC Tape and Reel (Pb-free) 28 Ld SSOP 28 Ld SSOP Tape and Reel 28 Ld SSOP (Pb-free) M28.3 TEMP. RANGE (°C) 0 to 70 0 to 70 0 to 70 0 to 70 PACKAGE 24 Ld SOIC 24 Ld SOIC Tape and Reel 24 Ld SOIC (Pb-free) 24 Ld SOIC Tape and Reel (Pb-free) 28 Ld SSOP 28 Ld SSOP Tape and Reel 28 Ld SSOP (Pb-free) 28 Ld SSOP Tape and Reel (Pb-free) 28 Ld SOIC 28 Ld SOIC Tape and Reel 28 Ld SOIC (Pb-free) PKG. DWG. # M24.3 M24.3 M24.3 M24.3 0 to 70 0 to 70 0 to 70 0 to 70 M16.15 M16.15 M16.15 M16.15 0 to 70 0 to 70 0 to 70 0 to 70 M28.209 M28.209 M28.209 M28.209 0 to 70 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 -40 to 85 E16.3 M16.3 M16.3 0 to 70 0 to 70 0 to 70 M28.3 M28.3 M28.3 0 to 70 0 to 70 M28.209 M28.209 M28.209 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 M24.3 M24.3 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 2 HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Pin Descriptions PIN VCC V+ VGND C1+ C1C2+ C2TIN TOUT RIN ROUT EN, EN SD, SD NC Power Supply Input 5V ±10%, (5V ±5% HIN207). Internally generated positive supply (+10V nominal). Internally generated negative supply (-10V nominal). Ground Lead. Connect to 0V. External capacitor (+ terminal) is connected to this lead. External capacitor (- terminal) is connected to this lead. External capacitor (+ terminal) is connected to this lead. External capacitor (- terminal) is connected to this lead. Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to VCC is connected to each lead. Transmitter Outputs. These are RS-232 levels (nominally ±10V). Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input. Receiver Outputs. These are TTL/CMOS levels. Receiver enable Input. With EN = 5V (HIN213 EN = 0V), the receiver outputs are placed in a high impedance state. Shutdown Input. With SD = 5V (HIN213 SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance state (except R4 and R5 of HIN213) and the transmitters are shut off. No Connect. No connections are made to these leads. FUNCTION 3 HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Pinouts HIN202 (PDIP, SOIC) TOP VIEW 1 2 3 4 5 6 7 8 9 HIN206 (SOIC) TOP VIEW 24 T4OUT 23 R2IN 22 R2OUT 21 SD 20 EN 19 T4IN 18 T3IN 17 R3OUT 16 R3IN 15 V14 C213 C2+ C1+ 1 V+ 2 C1- 3 C2+ 4 C2- 5 V6 16 VCC 15 GND 14 T1OUT 13 R1IN 12 R1OUT 11 T1IN 10 T2IN 9 R2OUT T3OUT T1OUT T2OUT R1IN R1OUT T2IN T1IN GND VCC T2OUT 7 R2IN 8 C1+ 10 V+ 11 C1- 12 +5V 10 C1+ + 12 C113 C2+ + 14 C2- +5V 9 VCC +5V TO 10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER T1 V+ 0.1µF 16 0.1µF 11 + 1 0.1µF + 3 4 0.1µF + 5 VCC C1+ C1C2+ C2+5V TO 10V VOLTAGE INVERTER V+ 2 + 0.1µF 0.1µF V- 15 + 2 0.1µF T1OUT +10V TO -10V VOLTAGE INVERTER V- 6 + 0.1µF T1IN +5V 400kΩ 7 +5V 400kΩ +5V 400kΩ T2 3 T3 T2OUT T2IN T1OUT 6 T1IN 11 +5V 400kΩ T1 14 T3IN T4IN R1OUT 18 1 T3OUT T4OUT R1IN T2IN 10 12 +5V 400kΩ T2 7 13 R1IN R1 5kΩ T2OUT +5V 400kΩ 19 5 T4 24 4 R1 5kΩ 23 R2IN R2 5kΩ 16 R3IN R3 5kΩ 21 SD GND 8 R1OUT 22 R2OUT 9 R2 GND 15 5kΩ 17 R3OUT 20 EN 8 R2OUT R2IN 4 HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Pinouts (Continued) HIN207 (SOIC, SSOP) TOP VIEW T3OUT T1OUT T2OUT 1 2 3 24 T4OUT 23 R2IN 22 R2OUT 21 T5IN 20 T5OUT 19 T4IN 18 T3IN 17 R3OUT 16 R3IN 15 V14 C213 C2+ HIN208 (SOIC) TOP VIEW T2OUT T1OUT R2IN R2OUT T1IN R1OUT R1IN GND VCC 1 2 3 4 5 6 7 8 9 24 T3OUT 23 R3IN 22 R3OUT 21 T4IN 20 T4OUT 19 T3IN 18 T2IN 17 R4OUT 16 R4IN 15 V14 C213 C2+ R1IN 4 R1OUT 5 T2IN 6 T1IN 7 GND VCC 8 9 C1+ 10 V+ 11 C1- 12 C1+ 10 V+ 11 C1- 12 +5V 9 0.1µF 10 C1+ + 12 C113 C2+ + 14 C2VCC +5V TO 10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER T1 V+ 11 + 0.1µF 0.1µF 10 C1+ + 12 C113 C2+ + 14 C2- +5V 9 VCC +5V TO 10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER T1 V+ 11 + 0.1µF 0.1µF V- 15 + 2 0.1µF T1OUT 0.1µF V- 15 + 2 0.1µF T1OUT T1IN +5V 400kΩ 7 +5V 400kΩ +5V 400kΩ T1IN +5V 400kΩ 5 +5V 400kΩ +5V 400kΩ T2 3 T3 T2OUT T2IN T2 1 T3 T2OUT T2IN 6 18 T3IN T4IN T5IN R1OUT 18 1 T3OUT T4OUT T5OUT R1IN T3IN T4IN R1OUT 19 24 T3OUT T4OUT R1IN +5V 400kΩ 19 +5V 400kΩ T4 24 T5 20 4 R1 5kΩ 23 R2IN R2 5kΩ 16 R3IN R3 GND 5kΩ R4OUT +5V 400kΩ 21 6 T4 20 7 R1 5kΩ 3 R2IN R2 5kΩ 23 R3IN R3 5kΩ 16 R4IN R4 GND 5kΩ 21 5 4 R2OUT 22 R2OUT 22 R3OUT 17 R3OUT 17 8 8 5 HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Pinouts (Continued) HIN211 (SOIC, SSOP) TOP VIEW T3OUT 1 T1OUT 2 T2OUT 3 R2IN 4 R2OUT 5 T2IN 6 T1IN 7 R1OUT 8 R1IN 9 GND 10 VCC 11 C1+ 12 V+ 13 C1- 14 28 T4OUT 27 R3IN 26 R3OUT 25 SD 24 EN 23 R4IN 22 R4OUT 21 T4IN 20 T3IN 19 R5OUT 18 R5IN 17 V16 C215 C2+ T3OUT 1 T1OUT 2 T2OUT 3 R2IN 4 R2OUT 5 T2IN 6 T1IN 7 R1OUT 8 R1IN 9 GND 10 VCC 11 C1+ 12 V+ 13 C1- 14 HIN213 (SSOP) TOP VIEW 28 T4OUT 27 R3IN 26 R3OUT 25 SD 24 EN 23 R4IN 22 R4OUT 21 T4IN 20 T3IN 19 R5OUT 18 R5IN 17 V16 C215 C2+ NOTE: R4 and R5 active in shutdown. +5V 11 0.1µF 12 C1+ + 14 C115 C2+ + 16 C2VCC +5V TO 10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER T1 V+ 13 + 0.1µF 0.1µF 12 C1+ + 14 C115 C2+ + 16 C2+5V 11 VCC +5V TO 10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER T1 V+ 13 + 0.1µF 0.1µF V- 17 + 2 0.1µF T1OUT 0.1µF V- 17 + 2 0.1µF T1OUT T1IN +5V 400kΩ 7 +5V 400kΩ +5V 400kΩ +5V 400kΩ T1IN +5V 400kΩ 7 +5V 400kΩ +5V 400kΩ +5V 400kΩ T2 3 T3 T2OUT T2IN 6 T2 3 T3 T2OUT T2IN 6 T3IN 20 1 T3OUT T3IN 20 1 T3OUT T4IN R1OUT 21 8 T4 28 9 T4OUT R1IN T4IN R1OUT 21 8 T4 28 9 T4OUT R1IN R1 5 R2OUT R2 26 R3OUT R3 22 R4OUT R4 19 R5OUT 24 EN GND 10 R5 5kΩ 4 R2IN 5kΩ 27 R3IN 5kΩ 23 R4IN 5kΩ 18 R5IN 5kΩ 25 SD R1 5 R2OUT R2 26 R3OUT R3 22 R4OUT R4 19 R5OUT 24 EN GND 10 R5 5kΩ 4 R2IN 5kΩ 27 R3IN 5kΩ 23 R4IN 5kΩ 18 R5IN 5kΩ 25 SD 6 HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 Absolute Maximum Ratings VCC to Ground. . . . . . . . . . . . . . . . . . . . . . (GND -0.3V)