ISL1572IUEZ

DATA SHORT To request the full datasheet, visit the ISL1572 product page. ISL1572 Power Line Communication (PLC) DESIGNS OR NEW F D E D N NT PART OMME L ACE M E P E NO T RE C R D E E ND RECOMM ISL1571 FN6536 Rev.3.00 Nov 7, 2019 The ISL1572 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into a 25 load. Features The ISL1572 is available in the thermally-enhanced 16 Ld QFN or 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The ISL1572 has control pins BIAS0 and BIAS1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application. • -75dBc typical driver output distortion at 4MHz • 21dBm output power capability • Drives up to 750mA from a +12V supply • 20VP-P differential output drive into 21 • Very low noise floor • -80dBc typical driver output distortion at 10MHz • -79dBc typical driver output distortion at 17MHz • Low quiescent current of 6mA per amplifier • Supply range - For ISL1572IUEZ 4.5V to 12V - For ISL1572IRZ ±2.25V to ±6V, 4.5V to 12V • 250MHz bandwidth • Thermal shutdown • Pb-free (RoHS compliant) Applications • UPA digital home standard Ordering Information PART NUMBER (Note) PART MARKING TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL1572IRZ 157 2IRZ -40 to +85 16 Ld QFN L16.4X4H ISL1572IRZ-T7* 157 2IRZ -40 to +85 16 Ld QFN (Tape and Reel) L16.4X4H ISL1572IUEZ BBBFA -40 to +85 10 Ld HMSOP M10.118B ISL1572IUEZ-T7* BBBFA -40 to +85 10 Ld HMSOP (Tape and Reel) M10.118B *Please refer to TB347 for details on reel specifications. NOTE: These Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. FN6536 Rev.3.00 Nov 7, 2019 Page 1 of 2 1RWLFH  'HVFULSWLRQVRIFLUFXLWVVRIWZDUHDQGRWKHUUHODWHGLQIRUPDWLRQLQWKLVGRFXPHQWDUHSURYLGHGRQO\WRLOOXVWUDWHWKHRSHUDWLRQRIVHPLFRQGXFWRUSURGXFWV DQGDSSOLFDWLRQH[DPSOHV