ISL28107

Precision Single, Dual and Quad Low Noise Operational Amplifiers ISL28107, ISL28207, ISL28407 The ISL28107, ISL28207 and ISL28407 are single, dual and quad amplifiers featuring low noise, low input bias current, and low offset and temperature drift. This makes them the ideal choice for applications requiring both high DC accuracy and AC performance. The combination of precision, low noise, and small footprint provides the user with outstanding value and flexibility relative to similar competitive parts. Applications for these amplifiers include precision active filters, medical and analytical instrumentation, precision power supply controls, and industrial controls. The ISL28107 is available in an 8 Ld SOIC, MSOP and TDFN package. The ISL28207 is available in the 8 Ld SOIC and MSOP packages. The ISL28407 will be offered in an 14 Ld SOIC, TSSOP and 16 Ld QFN packages. All devices are offered in standard pin configurations and operate over the extended temperature range to -40°C to +125°C. ISL28107, ISL28207, ISL28407 Features • Low Input Offset . . . . . . . . . . . . . . . . 75µV, Max. • Input Bias Current . . . . . . . . . . . . . . . . . . . .15pA • Superb Temperature Drift - Voltage Offset . . . . . . . . . . . . . 0.65µV/°C, Max. - Input Current . . . . . . . . . . . . . . . 0.9pA/°C, Max • Outstanding ESD performance - Human Body Model . . . . . . . . . . . . . . . . . 4.5kV - Machine Model . . . . . . . . . . . . . . . . . . . . .500V - Charged Device Model . . . . . . . . . . . . . . . 1.5kV • Very Low Voltage Noise, 10Hz . . . . . . . . 14nV/√Hz • Low Current Consumption (per amp). . . . 0.29mA, Max. • Gain-bandwidth Product . . . . . . . . . . . . . . . 1MHz • Wide Supply Range. . . . . . . . . . . . . . . 4.5V to 40V • Operating Temperature Range . . . -40°C to +125°C • No Phase Reversal • Pb-Free (RoHS Compliant) Applications*(see page 26) • • • • • • • • Precision Instruments Medical Instrumentation Spectral Analysis Equipment Active Filter Blocks Microphone Pre-amplifier Thermocouples and RTD Reference Buffers Data Acquisition Power Supply Control Related Literature*(see page 26) • See AN1508 “ISL281X7SOICEVAL1Z Evaluation Board User’s Guide” • See AN1509 “ISL282X7SOICEVAL2Z Evaluation Board User’s Guide” Typical Application C1 Input Noise Voltage Spectral Density 1000 INPUT NOISE VOLTAGE (nV/√Hz) V+ = ±19V AV = 1 8.2nF V+ VIN R1 R2 OUTPUT 19.1k 48.7k 3.3nF C2 + V- 100 Sallen-Key Low Pass Filter (1kHz) 10 0.1 1 10 100 1k 10k 100k FREQUENCY (Hz) September 9, 2010 FN6631.3 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2009, 2010. All Rights Reserved All other trademarks mentioned are the property of their respective owners. ISL28107, ISL28207, ISL28407 Ordering Information PART NUMBER (Notes 2, 3) ISL28107FBZ ISL28107FBZ-T7 (Note 1) ISL28107FBZ-T13 (Note 1) ISL28107FBZ-T7A (Note 1) ISL28107FUZ ISL28107FUZ-T7 (Note 1) ISL28107FUZ-T13 (Note 1) ISL28107FUZ-T7A (Note 1) ISL28107FRTZ ISL28107FRTZ-T7 (Note 1) ISL28107FRTZ-T13 (Note 1) ISL28107FRTZ-T7A (Note 1) ISL28207FBZ ISL28207FBZ-T7 (Note 1) ISL28207FBZ-T13 (Note 1) ISL28207FBZ-T7A (Note 1) ISL28207FRTZ ISL28207FRTZ-T7 (Note 1) ISL28207FRTZ-T13 (Note 1) ISL28207FRTZ-T7A (Note 1) Coming Soon ISL28407FBZ Coming Soon ISL28407FBZ-T7A (Note 1) Coming Soon ISL28407FVZ (Note 1) Coming Soon ISL28407FVZ-T13 (Note 1) Coming Soon ISL28407FVZ-T7A (Note 1) Coming Soon ISL28407FRZ Coming Soon ISL28407FRZ-T13 (Note 1) Coming Soon ISL28407FRZ-T7A (Note 1) ISL28107SOICEVAL1Z ISL28207SOICEVAL2Z NOTES: 1. Please refer to TB347 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), please see device information page for ISL28107, ISL28207 and ISL28407. For more information on MSL please see techbrief TB363. PART MARKING 28107 FBZ 28107 FBZ 28107 FBZ 28107 FBZ 8107Z 8107Z 8107Z 8107Z 107Z 107Z 107Z 107Z 28207 FBZ 28207 FBZ 28207 FBZ 28207 FBZ 207Z 207Z 207Z 207Z 28407 28407 28407 28407 28407 28407 28407 28407 Evaluation Board Evaluation Board TEMP. RANGE (°C) -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 -40 to +125 PACKAGE (Pb-Free) 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld MSOP 8 Ld MSOP 8 Ld MSOP 8 Ld MSOP 8 Ld TDFN 8 Ld TDFN 8 Ld TDFN 8 Ld TDFN 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld TDFN 8 Ld TDFN 8 Ld TDFN 8 Ld TDFN 14 Ld SOIC 14 Ld SOIC 14 Ld TSSOP 14 Ld TSSOP 14 Ld TSSOP 16 Ld QFN 16 Ld QFN 16 Ld QFN PKG. DWG. # M8.15E M8.15E M8.15E M8.15E M8.118 M8.118 M8.118 M8.118 L8.3x3A L8.3x3A L8.3x3A L8.3x3A M8.15E M8.15E M8.15E M8.15E L8.3x3A L8.3x3A L8.3x3A L8.3x3A M14.15 M14.15 M14.173 M14.173 M14.173 L16.4x4 L16.4x4 L16.4x4 2 FN6631.3 September 9, 2010 ISL28107, ISL28207, ISL28407 Pin Configurations ISL28107 (8 LD SOIC, MSOP) TOP VIEW NC -IN 1 2 -+ 8 7 6 5 ISL28107 (8 LD TDFN) TOP VIEW NC 1 -IN 2 +IN 3 V- 4 -+ 8 NC 7 V+ 6 VOUT 5 NC NC V+ VOUT NC +IN 3 V- 4 ISL28207 (8 LD SOIC) TOP VIEW VOUTA -IN_A +IN_A V1 2 3 4 -+ +8 7 6 5 V+ VOUTB -IN_B +IN_B VOUT_A 1 -IN_A 2 +IN_A 3 V- 4 ISL28207 (8 LD TDFN) TOP VIEW 8 V+ -+ +7 VOUT_B 6 -IN_B 5 +IN_B ISL28407 (14 LD SOIC, TSSOP) TOP VIEW VOUT_A 1 -IN_A 2 +IN_A 3 V+ 4 +IN_B 5 -IN_B 6 VOUT_B 7 -+ B +C A -+ D +14 VOUT_D ISL28407 (16 LD QFN) TOP VIEW VOUT_A VOUT_D 14 NC 13 -IN_D 12 +IN_D 11 16 15 NC 13 12 -IN_D D +11 +IN_D 10 +- V- -IN_A +IN_A V+ +IN_B 1 -+ A 2 3 -+ B C 4 10 +IN_C 9 -IN_C 8 VOUT_C V+IN_C 9 8 5 6 7 -IN_B VOUT_B 3 VOUT_C -IN_C FN6631.3 September 9, 2010 ISL28107, ISL28207, ISL28407 Pin Descriptions ISL28207 ISL28107 (8 LD SOIC, (8 LD SOIC, TDFN) MSOP, TDFN) 3 4 2 7 6 1, 5, 8 PD 3 5 4 2 6 8 1 7 PD ISL28407 (14 LD SOIC, TSSOP) 3 5 10 12 11 2 6 9 13 4 1 7 8 14 ISL28407 (16 LD QFN) 2 4 9 11 10 1 5 8 12 3 15 6 7 14 13, 16 PD PIN NAME +IN +IN_A +IN_B +IN_C +IN_D V-IN -IN_A -IN_B -IN_C -IN_D V+ VOUT VOUT_A VOUT_B VOUT_C VOUT_D NC PD No internal connection Thermal Pad - TDFN and QFN packages only. Connect thermal pad to ground or most negative potential. V+ CAPACITIVELY TRIGGERED VVCIRCUIT 2 VCIRCUIT 3 EQUIVALENT CIRCUIT Circuit 1 DESCRIPTION Amplifier non-inverting input Circuit 3 Circuit 1 Negative power supply Amplifier inverting input Circuit 3 Circuit 2 Positive power supply Amplifier output V+ IN500Ω 500Ω IN+ V+ OUT CIRCUIT 1 4 FN6631.3 September 9, 2010 ISL28107, ISL28207, ISL28407 Table of Contents Absolute Maximum Ratings ................................................................................................................ 6 Thermal Information .......................................................................................................................... 6 Operating Conditions .......................................................................................................................... 6 Electrical Specifications. ..................................................................................................................... 6 Electrical Specifications ...................................................................................................................... 8 Typical Performance Curves ............................................................................................................. .10 Applications Information ................................................................................................................... 19 Functional Description...................................................................................................................... Operating Voltage Range.................................................................................................................. Input ESD Diode Protection .............................................................................................................. Output Current Limiting ................................................................................................................... Output Phase Reversal..................................................................................................................... Using Only One Channel................................................................................................................... Power Dissipation............................................................................................................................ ISL28107, ISL28207, ISL28407 SPICE Model ...................................................................................... License Statement........................................................................................................................... 19 19 19 19 19 19 19 20 20 Characterization vs Simulation Results.............................................................................................. 23 Revision History ................................................................................................................................ 25 Products ............................................................................................................................................ 26 Package Outline Drawing ................................................................................................................. 27 Package Outline Drawing ................................................................................................................. 28 Package Outline Drawing ................................................................................................................. 29 Package Outline Drawing ................................................................................................................. 30 Package Outline Drawing ................................................................................................................. 31 Package Outline Drawing ................................................................................................................. 32 5 FN6631.3 September 9, 2010 ISL28107, ISL28207, ISL28407 Absolute Maximum Ratings Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 42V Maximum Differential Input Current . . . . . . . . . . . . . 20mA Maximum Differential Input Voltage . . . (V-) - 0.5V to (V+) + 0.5V Min/Max Input Voltage . . . . . . . . (V-) - 0.5V to (V+) + 0.5V Max/Min Input Current for Input Voltage >V+ or