H100-48S24

Q & H SERIES DC/DC MODULES • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment Applications • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The Q and H Families of high power, high density DC/DC converters offer power levels of up to 150 Watt in Industry-Standard Quarter-brick and Half-brick Pinouts. With a wide input voltage range and outputs, ranging from 1.5 to 24 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter, input undervoltage lockout, overtemperature protection, output current limiting and short circuit protection. Various packaging techniques offer versatility for multitude of applications and requirements. The use of patented design concepts facilitates maximum power delivered with the highest efficiency of up to 93%. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Specifications & Features Summary • No minimum load required • -40°C to +85°C ambient operation • Output adjustment +/-10% range • 1500V, 10MΩ input-to-output isolation • Unique Flat Transformer Technology • Complimentary Circuits • Over Temperature protection • Output remote sense feature • Input undervoltage lockout Model Q150-48S1.5 Q150-48S1.8 Q150-48S2.5 Q150-48S3.3 Q150-48S5 Q150-48S12 H75-12S2.5 H75-12S3.3 H75-12S5 H75-12S12 H75-12S15 H75-12S24 H100-24S2.5 H100-24S3.3 H100-24S5 H100-24S12 H100-24S15 H100-48S24 H150-48S1.5 H150-48S1.8 H150-48S2.5 H150-48S3.3 H150-48S5 H150-48S12 H150-48S-15 • Output current limit and short circuit protection • High power density up to 90W/inch³ • MTBF of up to 1,600,000 hours @ 50°C (Bellcore) • Remote On/Off pin control (Negative Logic available) • Meets Basic Insulation requirements of EN60950 (Open Frame Q and H Families) • UL 60950 recognized, TUV EN60950 and CSA C22.2 No. 60950-00 Certified (Approvals Pending) • Meets conducted limits of FCC Class B and CEI IEC61204-3 Class B with external filter I in No Load 0.100 0.100 0.100 0.100 0.100 0.100 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.100 0.100 0.100 0.100 0.100 0.100 0.100 Approval Pending Regulation Line/Load (%) ±0.2 / ±0.2 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.1 / ±0.1 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±0.2 / ±0.2 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 ±1.0 / ±1.0 Input Voltage Range (Vin) 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 9 - 18 9 - 18 9 - 18 9 - 18 9 - 18 9 - 18 18 - 36 18 - 36 18 - 36 18 - 36 18 - 36 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 36 - 75 36-75 I in Full Load 1.80 2.20 2.80 3.20 4.00 4.10 4.11 5.29 7.72 7.44 7.44 7.44 2.71 3.48 5.02 4.88 4.93 2.46 1.10 1.30 1.80 3.10 2.30 2.20 3.60 Vo (V) 1.5 1.8 2.5 3.3 5 12 2.5 3.3 5 12 15 24 2.5 3.3 5 12 15 24 1.5 1.8 2.5 3.3 5 12 15 Io (A) 45 45 40 35 30 12 15.0 15.0 15.0 6.3 5.0 3.1 20.0 20.0 20.0 8.3 6.7 4.2 30.0 30.0 30.0 30.0 30.0 12.5 10 Eff Typ (%) 85 86 87 89 91 93 76 78 81 84 84 84 77 79 83 85 85 85 85 86 75 79 83 85 85 Case Q150 Q150 Q150 Q150 Q150 Q150 H H H H H H H H H H H H H120 H120 H120 H120 H120 H120 H120 Pinout QS QS QS QS QS QS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS HS H5 Riple/Noise Typ. (mVp-p) 100 100 100 100 100 100 75 75 75 100 100 240 50 50 50 100 100 240 100 100 100 100 100 100 100 NOTE: ADD SUFFIX “N” FOR NEGATIVE LOGIC VERSIONS Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to specification sheet for performance characteristics and application guidelines. BOTTOM VIEW Q FAMILY 2.30 [58.40] MOUNTING INSERTS M3 X 0.5 THRU 4PL. 0.15 [3.81] BOTTOM VIEW H FAMILY 0.18 min. [4.60] 0.50 [12.70] 2*R1.5 0.425 [10.80] 3 Vin 1.19 [30.23] 0.60 [15.24] 1.45 [38.8] 0.30 [7.62] 2 On/Off 1 Vin + Vo Sense Trim Sense + Vo + 4 5 6 7 8 4 Vin0.30 0.60 [7.62] [15.24] Vo- 5 Sense - 6 Trim 7 Sense + 8 Vo+ 9 0.04 [1.02] 7 pl. 2.40 [61.00] 0.08 [2.03] 2 pl. 1.40 [35.56] 0.60 [15.24] 2.00 3 NC (H120) or Case 2 On/Off 1 Vin+ 0.15 [3.81] 0.13 [3.30] 0.14 [3.56] 2.00 [50.80] MOUNTING INSERTS [50.80] M3 X .05 THRU. 2 PLS. 0.13 [3.30] 0.20 [5.08] 0.46 max. [11.7] 2.002 [51.30] MOUNTING INSERTS SIDE VIEW Θ x 0.040 [1.02] Θ x 0.062 [1.52] 2 pl. 0.09 [2.29] 2.28 [57.90] 1.90 [48.26] H 120 OPEN FRAME CONSTRUCTION 0.40 [10.16] Tolerances Inches • XX ±0.020 • XXX ±0.010 Pin: ±0.002 Millimeters • X ±0.5 • XX ±0.25 ±0.05 All dimensions are in inches [mm] Pins 4 & 8 (Q150) are dia. 0.062 [1.57] Pins 5 & 9 (H) are dia. 0.08 [2.03] All other pins are dia. 0.040 [1.02] Case: Aluminum material with anodized finish Weight: 39.5g (1.4oz) for Q and 60g (2.3oz) for H Series Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 • Phone: 1-781-551-5500 • Fax: 1-781-551-5555 Rev. D