664A2002ALF

MODELS 664, 667, 668 Isolated and bussed circuits Thin film resistor network 0.150” SOIC packages RoHS compliant available FEATURES Precision Nichrome Resistors on Ceramic Passivation coating provides protection in humid environments Excellent frequency response Excellent long term resistance stability Industry Standard Packaging JEDEC 95, MS-012 (SOIC narrow body in 8, 14 and 16 lead pin counts) Ratio Tolerances < ± 0.05% TCR Tracking Tolerances < ± 5 ppm/°C SCHEMATICS ELECTRICAL1 2 Standard Resistance Range 1K ohms to 100K ohms (Isolated) 1K ohms to 20K ohms (Bussed) TCR ± 25 ppm/°C TCR Tracking ± 5 ppm/°C Operating Temperature Range -55°C to +125°C Interlead Capacitance < 2pF Insulation Resistance ≥ 10,000 Megohms 100 Vdc or √ PR Maximum Operating Voltage Noise, Maximum (MIL-STD-202, Method 308) -40 dB Resistor Power Rating at 70°C 1 Specifications subject to change without notice. 2 E96 codes available. 0.1 Watts BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 1 of 3 BI technologies 664, 667, 668 PACKAGE POWER AND DERATING DERATING CURVE Model Package Power @ 70°°C(watts) 664 0.4 667 0.5 668 0.5 3 ENVIRONMENTAL (MIL(MIL-R-83401) Thermal Shock plus Power Conditioning ∆R 0.25% Short Time Overload ∆R 0.1% Terminal Strength ∆R 0.1% Moisture Resistance ∆R 0.2% Mechanical Shock ∆R 0.25% Vibration ∆R 0.25% Low Temperature Operation ∆R 0.1% High Temperature Exposure ∆R 0.1% Load Life, 1,000 Hours ∆R 0.1% Resistance to Solder Heat ∆R 0.1% Dielectric Withstanding Voltage 100V for 1 minute Temperature Exposure, Maximum 215°C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -65°C to +125°C MECHANICAL Lead Plating 80/20 Tin Lead (Standard) 100 matte Tin (RoHS) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004” (0.102 mm) Substrate Material Alumina Resistor Material Passivated Nichrome Body Material 3 Molded Epoxy Maximum power per resistor @ 70°C is 100 mW, not to exceed package power BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 2 of 3 BI technologies 664, 667, 668 ORDERING INFORMATION4 66 4 -A-1002 A LF 7 Packaging Option: 7=7” Tape & Reel 13 = 13" Tape & Reel (No Code used for Tubes) Model Series: 66 = Passivated Nichrome on Ceramic Number of Leads: 4= 8 leads 7=14 leads 8=16 leads Lead Finish: No Code=SnPb LF=Lead Free (RoHS) Circuit Type: A=Isolated B=Bussed Resistance Code Tolerance Code RESISTANCE CODE4 First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use “R” to denote a decimal point. Example, 51 and 10000 ohms are coded as 51R0 and 1002 respectively. Standard values follow E96. RESISTANCE TOLERANCE CODE Accuracy Code at 25°C A B D F Absolute Resistance Tolerances (%) ± 0.1 ± 0.1 ± 0.5 ± 1.0 Ratio Tolerances (R1 Ref) (%) ± 0.05 ± 0.1 ± 0.1 ± 0.5 Temperature Coefficient of Resistance (ppm/°C) ±25 Temperature Coefficient of Resistance, Tracking (ppm/°C) ±5 PACKAGING OPTIONS (UNIT (UNIT COUNT/PACKAGE TYPE) TYPE) Model + Pin count Tubes 7” Tape & Reel 13” Tape & Reel 664 100 1000 2500 667 50 500 2500 668 50 500 2500 TYPICAL MARKING 4 Contact customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com May 29, 2008 page 3 of 3 BI technologies