D55342E07B21B0R

Precision Military and Space Qualified Chip Resistors Precision Military and Space Qualified Chip Resistors Features MIL-CHIP Series Now qualified to MIL-PRF-55342 Space Level T MIL-CHIP Seriesstandard sizes available Four industry • Now qualified to MIL-PRF-55342 Space Level T MIL-PRF-55342 Characteristics E, H, K, and M MIL-PRF-55342 extended reliability levels C, M, P, R, S and T • MIL-PRF-55342 Characteristics E, H, K, and M • Seven industry standard sizes available • MIL-PRF-55342 extended reliability levels C, M, P, R, S and T MIL-PRF-55342 Qualified Product Listing (QPL) Style Size Style 11 RM0402 Style 12 RM0603 Style 06 RM0705 Style 07 RM1206 Technology Thin Film PFC Series (TaNFilm®) Thin Film PFC Series (TaNFilm®) Thin Film PFC Series (TaNFilm®) Thin Film PFC Series (TaNFilm®) MIL-PRF-55342 Characteristic Tolerance Resistance Range (Ω) ±0.1% 100R - 30K ±1% 49R9 - 29K E, H, K, M ±2%, ±5% 51R0 - 30K ±10% 51R0 - 27K ±0.1%, ±1% 10R0 - 59K E, H, K, M E, H, K, M E, H, K, M ±2%, ±5%, ±10% 10R0- 56K ±0.1% 10R0 - 125K ±1% 10R0- 124K ±2%, ±5%, ±10% 10R0- 120K ±0.1% 100R - 500K ±1% 10R0- 499K ±2%, ±5%, ±10% 10R0- 470K Rated Voltage* (V) Rated Power (mW) Reliability Level 30 50 C, M, P, R, S 50 100 C, M, P, R, S, T Termination Type Type `B´ 50 150 C, M, P, R, S, T 100 250 C, M, P, R, S, T Sn/Pb solder over nickel barrier *Note: Voltage shall not exceed √P X R. General Note IRC reservesNote the right to make changes in product specification without notice or liability. General All information is subject to IRC’s own data and is considered accurate at time of going to print. TT Electronics reserves the right to make changes in product specification without notice or liability. © Advanced FilmtoDivision • 4222 own South data Staples Street • Corpus Christi Texas 78411 USAof going to print. AllIRC information is subject TT Electronics’ and is considered accurate at time Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com BI Technologies IRC Welwyn A subsidiary of TT electronics plc MIL-CHIP www.ttelectronics.com/resistors Series Issue March 2011 Sheet 1 of 3 © TT Electronics plc 11.22 Precision Military and Space Precision Military Qualified Qualified Chip Resistors Chip Resistors MIL-CHIP Series Physical Data L a TOP SIDE BOTTOM W H b 0402 L W H a b 0.040″ ±0.002 0.021″ ±0.002 0.012″ ±0.003 0.008″ ±0.002 0.010″ ±0.002 Precision Military Qualified Chip Resistors 0603 0.063″ ±0.004 0.031″ ±0.004 0.020″ ±0.004 0.012″ ±0.005 0.015″ ±0.005 0805 0.081″ ±0.005 0.050″ ±0.005 0.020″ ±0.006 0.016″ ±0.008 0.016″ ±0.008 1206 0.126″ ±0.006 0.063″ ±0.005 0.024″ ±0.004 0.016″ ±0.008 0.016″ ±0.008 Environmental Data Environmental Test MIL-PRF-55342 MIL-PRF-55342 Characteristic H Typical IRC ∆R Thermal Shock Low Temperature Operation Short-time Overload High Temperature Exposure Resistance to Solder Moisture Resistance Life Packaging MIL-PRF-55342 Ordering Data Standard packing for all styles is tape and reel in a quantity of 500 pieces. D55342 level H T (space) 07 B an1E00 S option of 300 pieces per reel. Optionally the reel quantity may be 1000 pieces, and product has additional Military Designator A service of RM0402, packing to waffle trays D55342 of 100forpieces is available for styles 12, 06 and 07. M55342 for styles RM0603, RM0705(0805), style RM1206 Characteristic E, H, K and M per MIL-PRF-55342 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Specification Number Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 06 for style RM0705(0805); 07 for style RM1206 11 for Style RM0402, 12 for style RM0603 MIL-CHIP Series Issue March 2011 Sheet 2 of 3 Termination Termination B per MIL-PRF-55342 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. Resistance and Tolerance All information subject to TT Electronics’ own data and is considered accurate at time of going to print. Resistance and istolerance code per MIL-PRF-55342 BI Technologies IRC Welwyn www.ttelectronics.com/resistors Product Level Designator © TT Electronics plc Product level C, M, P, R, S and T per MIL-PRF-55342 Packaging 11.22 Precision Military and Space Qualified Chip Resistors MIL-CHIP Series Ordering Procedure Example: D55342H07B1E00S (Style RM1206, ±50ppm/°C, specification number 07, SnPb termination, 1kΩ, ±1%, failure rate 0.001%/1000 hours) D 5 5 3 4 2 1 1 Military Designator H 2 0 7 3 2 Characteristic B 0 5 3 4 Specification Termination 0402 D55342 1206 M 300 ppm/°C 07 1206 x1 A D G J M E 4 0402, E 25ppm/°C 11 M55342 0603, H 50 ppm/°C 12 0805 K 100 ppm/°C 06 Value & Tolerance Code 0.1% 1% Tolerance 2% 5% 10% 1 B SnPb 0603 0805 Multiplier x 1000 B E H K N 0 S 6 5 6 Value & Tolerance Product Level C Non-ER 4 character code. 1%/1000hrs Letter code marks M P 0.1%/1000hrs decimal position and indicates multiplier R 0.01%/1000hrs and tolerance - see S 0.001%/1000hrs table below. T Space level x1000,000 C F T L P General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 11.22