HA72E-061R5LFTR13

High Power High Performance Molded Surface Mount Inductors MODEL HA72E-06 • Operating & Storage Temperature -40°C to +155°C • Temperature Rise, Maximum 50°C • Operating Frequency Up to 3MHz • AECQ-200 CERTIFIED Specifications @ 25°C Part Number Inductance(1) μH±20% Heating Current(2) (Adc) Isat(3) (Adc) HA72E-06R10LF HA72E-06R20LF HA72E-06R33LF HA72E-06R47LF HA72E-06R68LF HA72E-061R0LF HA72E-061R5LF HA72E-062R2LF HA72E-063R3LF HA72E-064R7LF HA72E-06330LF 0.10 0.20 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 33.0 26.2 20.3 18.0 16.1 14.4 10.3 8.4 8.3 6.6 5.4 1.8 45.0 34.0 22.0 19.0 16.5 15.0 10.0 8.5 8.0 6.5 2.5 DCR (mΩ) Typ. 1.5 2.5 3.2 4.0 5.0 9.0 13.0 18.0 26.5 39.0 302.0 Max. 1.7 2.8 3.9 4.2 5.5 10.0 14.0 20.0 30.0 42.0 332.0 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 130°C. Electrical Characteristics @ 25°C Top View Side View Bottom View Recommended PCB layout General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 05.13 High Power High Performance Molded Surface Mount Inductors MODEL HA72E-06 Electrical Characteristic @ 20°C (Cont’d) L Vs I INDUCTANCE (uH) 4.800 4.600 4.400 4.200 4.000 3.800 3.600 3.400 3.200 3.000 2.800 2.600 2.400 2.200 2.000 1.800 1.600 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0.000 06R10 06R20 06R33 06R47 06R68 061R0 061R5 062R2 063R3 064R7 0 2 3 4 5 6 8 9 10 12 14 15 16 18 20 21 22 24 25 26 27 28 30 33 35 36 40 45 50 55 60 65 DC CURRENT (A) Packing / Ordering Information One reel (13”) 2000 pcs One shipping carton (6 reels) 12000 pcs HA72E - 06 R33 LF TR13 Model Series Case Size: 13” tape & reel packing Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10μH, “R” denotes the decimal point. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com © TT electronics plc 05.13