Optically Coupled Isolator
OPI110, OPI1264 Series
Features:
15 kV electrical isola on
Choice of phototransistor
Low‐cost plas c housing
UL recognized File No. E58730
Description:
Each Optoisolator in this data sheet contains an infrared Light Emi ng Diode (LED) and a NPN silicon Photosensor. The
OPI110 and OPI1264 devices have 890 nm Light Emi ng Diode (LED) and NPN phototransistor sensor. The devices are
sealed in a precast opaque housing with a op cally transmissive path between the LED and the photosensor.
The Optoisolators in this data sheet are UL recognised under E58730.
This series is designed for transmission of informa on between one power supply voltage and another where the poten als
during surge condi ons are not greater than the guaranteed isola on voltage.
Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more
informa on.
Applications:
High voltage isola on between input and output
Electrical isola on in dirty environments
Industrial equipment
Medical equipment
Office equipment
Ordering InformaƟon
Part
Number
LED
Peak
Wavelength
Sensor
IsolaƟon
Voltage
(,000)
CTR
Min /
Max
VCE
Lead Length /
(Volts)
Spacing
Max
12.5 / NA
OPI110
OPI110A
25 / NA
10 / 40
Transistor
OPI110B
50 / 125
OPI110C
100 / NA
30
15
890 nm
OPI1264
25 / NA
Transistor
10 / 40
OPI1264B
50 / 125
OPI1264C
100 / NA
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
0.50" / 0.55"
12.5 / NA
OPI1264A
© TT electronics plc
IF (mA)
Typ / Max
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev D
10/2022
Page 1
Optically Coupled Isolator
OPI110, OPI1264 Series
Electrical Specifications
Absolute Maximum RaƟngs (TA = 25o C unless otherwise noted)
Storage Temperature
‐40° C to +100° C
Opera ng Temperature
‐40° C to +85° C
(1)(2)
Input‐to‐Output Isola on Voltage
± 15 kVDC
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
(3)
260° C
Input Diode
Forward DC Current
40 mA
Reverse DC Voltage
2V
Power Dissipa on(4)
50 mW
Output Photosensor
Collector‐Emi er Voltage
OPI110, OPI1264
30
Emi er‐Collector Voltage
5
Power Dissipa on
(5)
100 mW
Notes:
(1) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
(2) UL recogni on is for 15 kV dc for one minute.
(3) RMA flux is recommended. The dura on can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 0.83 mW/°C above 25° C.
(5) Derate linearly 1.67 mW/°C above 25° C..
OPI1264
1
4
2
3
OPI110
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
© TT electronics plc
1
4
2
3
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev D
10/2022
Page 2
Optically Coupled Isolator
OPI110, OPI1264 Series
Electrical CharacterisƟcs (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode (See OP265 for addi onal informa on ‐ for reference only)
VF
Forward Voltage
‐
‐
1.6
V
IF = 20 mA
IR
Reverse Current
‐
‐
100
µA
VR = 2 V
Output Photosensor (See OP505 for addi onal informa on ‐ for reference only)
V(BR)CEO
Collector‐Emi er Breakdown Voltage
OPI110, OPI1264
30
‐
‐
V
IC = 100 µA
V(BR)ECO
Emi er‐Collector Breakdown Voltage
OPI110
OPI1264
5
‐
‐
‐
‐
‐
V
IE = 100 µA, IF = 0
IE = 100 µA
Collector‐Emi er Dark Current
OPI110, OPI1264
‐
‐
100
1.25
‐
44
12.5
25.0
50.0
100.0
‐
‐
‐
‐
‐
‐
125
‐
ICEO
nA
VCE = 15 V, EE = 0
Coupled
IC(ON)
Coupled “ON” Current
OPI110, OPI1264
IC/IF
DC Current Transfer Ra o
OPI110, OPI1264
OPI110A, OPI1264A
OPI110B, OPI1264B
OPI110C, OPI1264C
Collector Satura on Voltage
OPI110, OPI1264
‐
‐
0.4
ICEO
Collector‐Emi er Dark Current
OPI110, OPI1264
‐
‐
200
VISO
Isola on Voltage
15
‐
‐
VCE(SAT)
mA
%
V
nA
kVDC
IF = 10mA
VCE = 5V
IF = 10 mA, VCE = 5 V
IF = 10 mA, VCE = 5 V
IF = 10 mA, VCE = 5 V
IF = 10 mA, VCE = 5 V
IF = 10 mA, IC = 1.6 mA
VCE = 20 V, IF = 0
See Note 1.
Notes:
(1) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev D
10/2022
Page 3
很抱歉,暂时无法提供与“OPI1264C”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+28.118771+3.48812
- 100+25.84406100+3.20595
- 250+24.78729250+3.07486
- 500+23.92259500+2.96759
- 1000+23.058011000+2.86034
- 2500+22.577562500+2.80074