OVLAW4CB6

White High-Intensity LED Lamp (3 mm, 45° Viewing Angle) OVLAW4CB6 x x x x x High luminous intensity Blue LED + yellow phosphor Through-hole type Water clear lens Available on tape and reel Product Photo Here The OVLAW4CB6 is a round 3 mm white high-intensity through-hole lamp with a 45° viewing angle. It is designed for wide-angle uniform light output. Applications x Indicators for medical, industrial, consumer and office equipment x Indicators for white goods and home appliances x Interior and exterior architectural and accent lighting x Signs and digital information displays, video screen non-color and RGB presentation x Automotive backlighting and indicators RoHS Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLAW4CB6 InGaN White 1000 Water Clear Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A .1 04/06 Page 1 of 5 White High-Intensity LED Lamp OVLAW4CB6 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -30 ~ +85° C Reverse Voltage 5V DC Forward Current 30 mA DC Forward Current Reduction 1 -0.50 mA/° C Power Dissipation 120 mW Lead Soldering Temperature (5 seconds maximum) 260° C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS 2 IV Luminous Intensity (Axial Direction) ---- 1000 ---- mcd IF = 20 mA VFI Forward Voltage 2.8 3.4 3.9 V IF = 20 mA IR Reverse Current ---- ---- 10 µA VR = 5 V ---- 0.31 ---- ---- IF = 20 mA ---- 0.32 ---- ---- IF = 20 mA x Chromaticity y Notes: 1. Under this condition: TOPR = 40 ~ 85° C. 2. Guaranteed value is 20% higher and/or lower than this value. Standard Bins (IF = 20 mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVLAW4CB6 may be filled with any or all bins contained as below. A0 B3 B4 B5 B6 C0 1500-2100 7 1050-1500 6 800-1050 5 Chromaticity Coordinates (x, y) Luminous Intensity is at B5 bin or above. Rank A0 B3 B4 B5 B6 C0 Chromaticity x 0.280-0.264 0.287-0.283 0.307-0.304 0.296-0.287 0.311-0.307 0.330-0.330 Coordinates y 0.248-0.267 0.295-0.305 0.315-0.330 0.276-0.295 0.294-0.315 0.318-0.360 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content