OVLJGGD8

Oval Green LED Lamp (4mm) OVLJGGD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLJGGD8 is designed for superior performance in outdoor environments. Its radiation pattern matches red (OVLJRGD8) and blue (OVLJBGD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLJGGD8 InGaN Green 1200 Green Diffused RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Green LED Lamp (4mm) OVLJGGD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +95 °C Reverse Voltage 5V Continuous Forward Current 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 105 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 1 260°C Note: 1. Solder time less than 3 seconds at temperature extreme. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 770 1200 ---- mcd IF = 20mA VF Forward Voltage ---- 3.6 4.2 V IF = 20mA IR Reverse Current ---- ---- 100 µA VR = 5V Dominant Wavelength 520 525 535 nm IF = 20mA ---- 100 ---- deg IF = 20mA ---- 50 ---- deg IF = 20mA D 2 ½H-H 2 ½V-V 50% Power Angle Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLJGGD8 may be filled with any or all bins contained as below. X7 X8 X9 2130 1520 U 1100 T 770 S 520 525 530 535 Luminous intensity is at S bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content