OVLKQGT6

Oval Red-Orange LED Lamp (3mm) OVLKQGT6 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLKQGT6 is designed for superior performance in outdoor environments. Its radiation pattern matches green (OVLKGGT6) and blue (OVLKBGT6) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLKQGT6 AlInGaP Red-Orange 430 Orange Diffused 1 ANODE 2 CATHODE RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Red-Orange LED Lamp (3mm) OVLKQGT6 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -30 ~ +100 °C Operating Temperature Range -30 ~ +85 °C Reverse Voltage 3V Continuous Forward Current 30 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 80 mW Lead Soldering Temperature (5 seconds max) 260 °C Electrical Characteristics TA = 25o C unless otherwise noted PARAMETER SYMBOL MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 350 430 ---- mcd IF = 20 mA VF Forward Voltage ---- 2.1 2.7 V IF = 20 mA IR Reverse Current ---- ---- 50 µA VR = 3V Dominant Wavelength 611 616 621 nm IF = 20 mA 50% Power Angle ---- ---- deg IF = 20 mA D 2 ½ x: 100 y: 60 Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLKQGT6 may be filled with any or all bins contained as below. 520–625 5 430–520 4 350–430 3 611 616 621 Luminous intensity is at 3 bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. When soldering, leave 2.5mm minimum clearance between the resin base and the soldering point. Issue 1.0 Page 2 0505 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Oval Red-Orange LED Lamp (3mm) OVLKQGT6 Typical Electro-Optical Characteristics Curves % mA V Forward Current vs. Forward Voltage mA mA Relative Luminous Intensity vs. Forward Current % °C Maximum Forward DC Current vs. Ambient Temperature nm Relative Luminous Intensity vs. Wavelength OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 3 Oval Red-Orange LED Lamp (3mm) OVLKQGT6 Issue 1.0 Issue 1.0 Page 4 0505 Change Description Initial Release Approval Date J. Haynie 5/26/05 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com