OVSTRGBBCR8

Full Color PLCC6 LED OVSTRGBBCR8 • • • • • Full-color red/green/blue PLCC package with 6 pins Wide viewing angle High performance Tuneable color mix Product Photo Here The OVSTRGBBCR8 package design provides wide viewing angle, low power consumption, and high luminous intensity. Color on demand is made possible by isolated chip circuits, allowing each LED to be driven individually or in tunable color combinations. Applications • Amusement equipment • Information boards • Automotive interior lighting • Portable appliances Part Number OVSTRGBBCR8 DIMENSIONS ARE IN: Type R G B • • • Material AlInGaP InGaN InGaN Indoor and outdoor displays Backlighting RGB full-color displays Chip Emitted Color Red Green Blue Intensity Typ. mcd 1000 900 390 Lens Color Water Clear [MILLIMETERS] INCHES 5a RoHS Moisture [ 1.50 ] .059 DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.5 10/09 Page 1 of 7 Full Color PLCC6 LED OVSTRGBBCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted RATING PARAMETER R G B UNIT Storage Temperature -40 ~ +100 °C Operating Temperature -40 ~ +100 °C 5 V Reverse Voltage Continuous Forward Current1 80 80 80 mA Peak Forward Current (10% Duty Cycle, PW ≤ 100 μsec) 200 100 100 mA Power Dissipation 200 400 400 mW 110 110 110 °C Junction/ambient (1 chip on ) 250 210 210 °C/W 2 Junction/ambient (3 chips on ) 500 300 300 °C/W Junction/solder point (1 chip on) 150 130 130 °C/W Junction/solder point (3 chips on) 150 160 160 °C/W Junction Temperature 2 Notes: 1. Single color light 2. Rth test condition: Mounted on PC Board FR 4 (pad size ≥ 40mm2) Electrical Characteristics TA = 25o C unless otherwise noted VALUES SYMBOL PARAMETER UNIT CONDITIONS IV Luminous Intensity mcd IF = 50 mA VF Forward Voltage V IF = 50 mA IR 10 µA VR = 5 V 514-534 460-480 nm IF = 50 mA 620 521 468 nm IF = 50 mA 50% Power Angle 120 120 120 deg IF = 50 mA Spectral Radiation Bandwidth 24 38 28 nm IF = 50 mA R G B Min 710 710 280 Avg 1000 900 390 Avg 2.0 4.0 4.0 Max 2.5 5.0 5.0 Reverse Current (max) 10 10 λD Dominant Wavelength 610-625 λP Wavelength at Peak Emission 2 Θ½ Δλ OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 10/09 Page 2 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBBCR8 Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD ) bins shown. Orders for OVSTRGBBCR8 may be filled with any or all bins contained as below. Red PD 1800 Luminous Intensity (mcd) Q 1400 P 1120 N 900 M 710 610 Dominant Wavelength (nm) Luminous intensity is at M bin or above. 625 Green GA 1800 Luminous Intensity (mcd) Q 1400 P 1120 N 900 M 710 514 Dominant Wavelength (nm) Luminous intensity is at M bin or above. 534 Blue BA 710 Luminous Intensity (mcd) K 560 J 450 H 355 G 280 460 Dominant Wavelength (nm) Luminous intensity is at G bin or above. 480 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.5 10/09 Page 3 of 7 Full Color PLCC6 LED OVSTRGBBCR8 Typical Electro-Optical Characteristics Curves Relative Intensity vs Dominant Wavelength Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 10/09 Page 4 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBBCR8 Typical Electro-Optical Characteristics Curves Maximum Forward DC Current vs Solder Point Temperature Maximum Forward DC Current vs Ambient Temperature Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.5 10/09 Page 5 of 7 Full Color PLCC6 LED OVSTRGBBCR8 Reel Dimensions: 7-inch reel Loaded Quantity—700 pcs per reel Carrier Tape Dimensions: Loaded quantity 900 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 10/09 Page 6 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Full Color PLCC6 LED OVSTRGBBCR8 SMD LED Application Notes PLCC Package OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.5 10/09 Page 7 of 7