10BF10

Preliminary Data Sheet PD-20482 rev. B 06/99 10BF.. Series SURFACE MOUNTABLE ULTRAFAST RECOVERY DIODE SMB (DO-214AA) Major Ratings and Characteristics Characteristics 10 I F(AV) VRRM I FSM VF trr TJ @ 1 A, TJ = 25°C @ TJ = 25°C range 0.95 35 Features Units For surface mounted applications Low profile package A V A 1.7 100 V ns °C 10BF.. 20 40 1 100 to 800 30 1.4 50 - 50 to 150 60 80 Built-in stress relief Compatible with all pick & place equipments Ultrafast recovery times for high efficiency Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction High temperature soldering: 260°C\10 seconds at terminals 1.91 (.075) 2.11 (.083) 3.30 (.130 ) 3.94 (.155 ) 4.06 (.160) 4.70 (.185) .152 (.006) .305 (.012) 2.13 (.083) 2.44 (.096) 0.76 (.030) 1.27 (.050) .102 (.004) .203 (.008) 5.08 (.200) 5.59 (.220) Outline SMB (DO-214AA) Dimensions in millimeters and (inches) 1 10BF.. Series Preliminary Data Sheet PD-20482 rev. B 06/99 Voltage Ratings V RRM , m aximum Part Number peak reverse voltage V 100 200 400 600 800 VDC , maximum blocking voltage V 100 200 400 600 800 IRRM 100°C µA 100 10BF10 10BF20 10BF40 10BF60 10BF80 Maximum Ratings and Electrical Characteristics Parameters 10 20 10BF.. 40 60 80 Units Conditions A A @ T L = 100° C 8.3ms single half sine wave superimposed on rated load (JEDEC Method)TA = 55° C I F(AV) Maximum Average Forward Current IFSM Peak Forward Surge Current 1 30 VFM Max. Instantaneous ForwardVoltage IRM Maximum DC Reverse Current at Rated DC Blocking Voltage t rr CJ Reverse Recovery Time Typical Junction Capacitance 0.95 1.4 10 100 1.7 V µA @ 3A T A = 25° C T A = 100° C 35 10 35 50 100 15 30 ns pf I F = 0.5A, IR = 1.0A, Irr = 0.25A @ 1.0MHz applied reversevoltage of 4.0V RthJ Maximum Thermal Resistance TJ Operating Temperature Range °C/W 8.0mm 2 (.013mm thick) land areas °C °C g (oz) JEDEC molded plastic - 50 to 150 - 50 to 150 0.21 (0.007) SMB/DO-214AA T stg Storage Temperature Range wt Approximate Weight Case Style Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. For capacitive load, derate current by 20%. 2 10BF.. Series Preliminary Data Sheet PD-20482 rev. B 06/99 50 S NON INDUCTIVE 10 S NON INDUCTIVE trr +0.5A D.U.T. (-) (+) (-) 25 V dc (a pprox) 1S NON INDUCTIVE OSCILLOSCOPE NOTE 1 PULSE GENERATOR NOTE 2 0 -0.25 A (+) -1 A SET TIME BASE FOR 10nsec/cm 1c m Fig. 1 - Reverse Recovery Time Characteristic and Test Circuit Diagram 10 Instantaneous Forward Current (A) 10BF10/20 1000 Junction Capacitance - C T (pF) Typical 1 T J = 25 °C 10BF40/60 100 10BF10/20 10BF80 0.1 10 10BF40/60/80 0.01 0 0.2 0.4 0.6 0.8 1 1.2 1.4 Instantaneous Forward Voltage (V) 1 0 20 40 60 80 100 Reverse Voltage - V R (V) Fig. 2 - Typical Forward Characteristics 150 140 Lead Temperature - (°C) 130 120 110 100 90 80 70 60 50 0 0.2 0.4 0.6 0.8 1 1.2 Average Forward Current - I F (AV) (A) Single phase half wave 60Hz resistive or inductive load P.C.B. mounted on 0.315x0.315" (8x8mm) copper pad areas Fig. 3 - Typical Junction Capacitance 100 Peak Forward Surge Current - I FSM (A) 10 8.3ms Single Half Sine Wave JEDEC Method 1 1 10 Number of Cycles at 60HZ 100 Fig. 4 - Forward Current Derating Curve Fig. 5 - Peak Forward Surge Current 3 10BF.. Series Preliminary Data Sheet PD-20482 rev. B 06/99 Ordering Information Table Device Code 10 1 B 2 F 3 80 4 1 2 3 4 - Current Rating x 10: 10 = 1A B = DO-214AA (SMB) Surface Mount F = Ultrafast Recovery Voltage code: Code = VRRM / 10 Tape & Reel Information Dimensions in millimeters and (inches) 4