150UR120DM

Bulletin I2025 rev. C 10/02 150U(R).. SERIES STANDARD RECOVERY DIODES Features Diffused diode Wide current range High voltage ratings up to 1200V High surge current capabilities Stud cathode and stud anode version Hermetic metal case Stud Version 150A Typical Applications Welders Power supplies Machine tool controls High power drives Medium traction applications Battery charges Free-wheeling diodes Major Ratings and Characteristics Parameters IF(AV) @ TC IF(RMS) IFSM @ 50Hz @ 60Hz It 2 150U(R).. 150 125 235 3000 3140 45 41 600 and 1200 - 40 to 180 Units A °C A A A KA2s KA2s V °C @ 50Hz @ 60Hz V RRM range TJ case style DO205 (DO-8) www.irf.com 1 150U(R).. Series Bulletin I2025 rev. C 10/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 60 150U(R).. 80 100 120 VRRM , maximum repetitive peak reverse voltage V 600 800 1000 1200 VRSM , maximum nonrepetitive peak rev. voltage V 700 900 1100 1300 IRRM max. @ TJ = TJ max. mA 15 Forward Conduction Parameter I F(AV) Max. average forward current @ Case temperature I F(RMS) Max. RMS forward current I FSM I 2t Max. peak, one-cycle forward, non-repetitive surge current Maximum I2t for fusing 150U(R).. 150 125 235 3000 3140 45 41 Units Conditions A °C A A Dc @ 110°C t = 10ms t = 8.3ms KA2s t = 10ms t = 8.3ms KA2√s mΩ V V Ipk= 600A, TJ = 25°C, tp = 10ms sinusoidal wave No voltage reapplied No voltage reapplied Sinusoidal half wave, Initial TJ = TJ max. 180° conduction, half sine wave I 2√ t rf V F(T0) V FM Maximum I2√t for fusing Slope resistance Threshold voltage Max. forward voltage drop 0.97 0.80 1.47 t = 0.1 to 10ms, no voltage reapplied @ TJ = TJ max. Thermal and Mechanical Specifications Parameter TJ Tstg RthJC RthCS T Max. junction operating temperature range Max. storage temperature range Max. thermal resistance, junction to case Max. thermal resistance, case to heatsink Max. allowed mounting torque +0 -20% 150U(R).. -40 to 180 -40 to 180 0.3 0.1 17 14.5 Units °C Conditions K/W Nm g DC operation Mounting surface, smooth, flat and greased Not lubricated threads Lubricated threads wt Approximate weight Case style 130 DO-205 (DO-8) See Outline Table ∆RthJC Conduction (The following table shows the increment of thermal resistence R thJC when devices operate at different conduction angles than DC) Conduction angle 180° 120° 90° 60° 30° Sinusoidal conduction 0.031 0.038 0.048 0.071 0.120 Rectangular conduction Units 0.023 0.040 0.053 0.075 0.121 Conditions TJ = TJ max. K/W 2 www.irf.com 150U(R).. Series Bulletin I2025 rev. C 10/02 Ordering Information Table Device Code 150 1 1 2 3 4 5 6 150 U R U 2 R 3 120 4 D 5 L 6 = Standard xx0U device = Essential Part Number = Stud Reverse Polarity (Anode to Stud) None = Stud Normal Polarity (Cathode to Stud) Voltage code: Code x 10 = VRRM (See Voltage Ratings table) D L M = Diffused diode = Stud base 1/2" - 20UNF-2A threads = Metric base M12 x 1.75 None = Stud base 3/8" - 24UNF-2A threads Outline Table 150U(R) Series Conforms to JEDEC DO-205 (DO-8) All dimensions in millimeters (inches) * * FOR METRIC DEVICE M12 x 1.75 * FOR STUD BASE 1/2" - 20UNF-2A THREADS; refer "Odering Information Table" www.irf.com 3 150U(R).. Series Bulletin I2025 rev. C 10/02 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 180 160 140 120 100 80 0 50 150U(R) RthJC (DC) = 0.3 K/W 180 160 140 120 100 80 0 40 150U(R) RthJC (DC) = 0.3 K/W Conduction Angle Conduction Period 30˚ 60˚ 90˚ 120˚ DC 180˚ 30˚ 60˚ 90˚ 120˚ 180˚ 100 150 200 80 120 160 200 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Average Forward Current (A) Fig. 2 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 300 250 200 150 100 50 0 0 50 100 150 80 200 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) 180˚ 120˚ 90˚ 60˚ 30˚ RMS Limit Conduction Angle 150U(R) Tj = 180˚C Rt hS A 0.2 K/ W 0.4 K/W 0.6 K/W =0 .0 5 K/ W -D el ta R 1.2 K /W Fig. 3 - Forward Power Loss Characteristics Maximum Average Forward Power Loss (W) 300 250 200 150 100 50 0 0 50 100 150 200 250 300 80 Conduction Period 180˚ 120˚ 90˚ 60˚ 30˚ RMS Limit Rt hS A DC 0.2 K/W =0 .05 K/ W 0.4 K/W 0.6 K/W 0.8 K /W -D elt aR 150U(R) Series Tj = 180˚C 1.2 K/W 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics 4 www.irf.com 150U(R).. Series Bulletin I2025 rev. C 10/02 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave Forward Current (A) 3500 3000 2500 2000 1500 1000 500 1 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 180˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 4000 3500 3000 2500 2000 1500 1000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 180˚C No Voltage Reapplied Rated V rrm Reapplied Per Junction Per Junction 10 100 500 0.01 0.1 Pulse Train Duration(s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 10000 1000 100 Tj = 25˚C Tj = 180˚C 10 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (K/W) 1 Steady State Value RthJC = 0.3 K/W (DC Operation) 0.1 150U(R) 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristic www.irf.com 5 150U(R).. Series Bulletin I2025 rev. C 10/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/02 6 www.irf.com