15ETH06S

Bulletin PD-20749 rev. D 08/01 15ETH06 15ETH06S 15ETH06-1 Hyperfast Rectifier Features • • • • • Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature Single Die Center Tap Module trr = 22ns typ. IF(AV) = 15Amp VR = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM IFM TJ, TSTG Peak Repetitive Peak Reverse Voltage Average Rectified Forward Current Non Repetitive Peak Surge Current Peak Repetitive Forward Current Operating Junction and Storage Temperatures @ TC = 140°C @ TJ = 25°C Max 600 15 120 30 - 65 to 175 Units V A °C Case Styles 15ETH06 15ETH06S 15ETH06-1 Base Cathode Base Cathode 2 2 1 3 1 3 1 3 Cathode Anode N/C Anode N/C Anode TO-220AC www.irf.com D2PAK TO-262 1 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 1.8 1.3 0.2 30 20 8.0 2.2 1.6 50 500 V V V µA µA pF nH IR = 100µA IF = 15A, TJ = 25°C IF = 15A, TJ = 150°C VR = VR Rated TJ = 150°C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 22 28 29 75 3.5 7 57 300 51 20 580 30 35 ns A nC TJ = 125°C nC A ns IF = 1A, diF/dt = 100A/µs, VR = 30V IF = 15A, diF/dt = 100A/µs, VR = 30V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C IF = 15A diF /dt = 800A/µs VR = 390V IF = 15A diF /dt = 200A/µs VR = 390V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - trr IRRM Qrr Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA ! RthCS " Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Per Leg Per Leg Min - 65 - Typ 1.0 0.5 2.0 0.07 - Max 175 175 1.3 70 12 10 Units °C °C/W g (oz) Kg-cm lbf.in Mounting Torque 6.0 5.0 ! Typical Socket Mount "# Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 100 Reverse Current - I R (µA) 1000 100 10 1 0.1 25˚C T J = 175˚C 150˚C 125˚C 100˚C Instantaneous Forward Current - I F (A) 0.01 0.001 T = 175˚C J 0 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 10 T = 150˚C J T = 25˚C J 1000 Junction Capacitance - C T (pF) T J = 25˚C 100 1 0.5 10 1 1.5 2 2.5 3 0 100 200 300 400 500 600 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance Z thJC (°C/W) 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Notes: PDM t1 t2 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 10 www.irf.com 3 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 180 Allowable Case Temperature (°C) 35 Average Power Loss ( Watts ) 170 160 DC 30 25 20 15 10 5 0 0 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC RMS Limit 150 140 130 80% Rated Vr applied 120 see note (3) 110 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Square wave (D = 0.50) 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics 100 IF = 30 A IF = 15 A 1000 V R = 390V T J = 125˚C T J = 25˚C 80 800 IF = 30 A IF = 15 A 40 Qrr ( nC ) V R = 390V T J = 125˚C T J = 25˚C 60 trr ( ns ) 600 400 20 200 0 100 di F /dt (A/µs ) 1000 0 100 di F /dt (A/µs ) 1000 Fig. 7 - Typical Reverse Recovery vs. di F /dt Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 9- Reverse Recovery Parameter Test Circuit 3 IF 0 trr ta tb 4 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 14.09 (0.55) 13.47 (0.53) 3 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 2.92 (0.11) 2.54 (0.10) TERM 2 DIA. 6.48 (0.25) 6.23 (0.24) 2° 1 3 1.32 (0.05) 1.22 (0.05) Base Cathode Cathode Anode 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) 2 1 3 N/C Anode NC 6 www.irf.com 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) Base Cathode 2 1.14 (0.045) 2X MINIMUM RECOMMENDED F OOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 1 3 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X N/C Anode 2.54 (0.10) 2X Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) Ordering Information Table Device Code 15 1 E 2 T 3 H 4 06 5 -1 6 1 2 3 4 5 6 - Current Rating (15 = 15A) E T H = Single Diode = TO-220, D2Pak = HyperFast Recovery Voltage Rating (06 = 600V) "-1" = TO-262 Option S = D2Pak None = TO-220AC www.irf.com 7 15ETH06, 15ETH06S, 15ETH06-1 Bulletin PD-20749 rev. D 08/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/01 8 www.irf.com