70HF40M

Bulletin I20202 rev. F 01/05 70HF(R) SERIES STANDARD RECOVERY DIODES Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available Types up to 1600V VRRM Stud Version 70 A Typical Applications Battery charges Converters Power supplies Machine tool controls Major Ratings and Characteristics 70HF(R) Parameters IF(AV) @ TC IF(RMS) IFSM @ 50Hz @ 60Hz It 2 10 to 120 70 140 110 1200 1250 7100 6450 100 to 1200 - 65 to 180 140 to 160 70 110 Units A °C A A A A2s A2s @ 50Hz @ 60Hz VRRM TJ range range 1400 to 1600 - 65 to 150 V °C case style DO-203AB (DO-5) www.irf.com 1 70HF(R) Series Bulletin I20202 rev. F 01/05 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code VRRM, maximum repetitive peak reverse voltage V 100 200 400 600 800 1000 1200 1400 1600 VRSM, maximum nonrepetitive peak reverse voltage V 200 300 500 720 960 1200 1440 1650 1900 VR(BR), minimum avalanche voltage V 200 300 500 725 950 1150 1350 1550 1750 IRRM max. @ TJ = TJ max. mA 15 10 20 40 60 70HF(R) 80 100 120 140 160 9 4.5 Forward Conduction Parameter I F(AV) Max. average forward current @ Case temperature I F(RMS) Max. RMS forward current I FSM Max. peak, one-cycle forward, non-repetitive surge current 70HF(R) Units Conditions 10 to 120 140 to 160 70 140 110 1200 1250 1000 1050 A 70 110 A °C A t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms As 2 180° conduction, half sine wave No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. I 2t Maximum I2t for fusing 7100 6450 5000 4550 t = 8.3ms t = 10ms t = 8.3ms I 2√ t Maximum I2√t for fusing voltage 71000 0.79 A2√s t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. V F(TO)1 Low level value of threshold V F(TO)2 High level value of threshold voltage r f1 r f2 V FM Low level value of forward slope resistance High level value of forward slope resistance Max. forward voltage drop 1.35 V 1.00 2.33 mΩ 1.53 1.46 V (I > π x IF(AV)), TJ = TJ max. Ipk= 220A, TJ = 25°C, tp = 400µs rectangular wave (I > π x IF(AV)), TJ = TJ max. (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 2 www.irf.com 70HF(R) Series Bulletin I20202 rev. F 01/05 Thermal and Mechanical Specifications Parameter TJ Tstg RthJC RthCS T Max. junction operating temperature range Max. storage temperature range Max. thermal resistance, junction to case Max. thermal resistance, case to heatsink Allowable mounting torque 70HF(R) 10 to 120 140 to 160 -65 to 180 -65 to 180 -65 to 150 -65 to 150 Units °C Conditions 0.45 K/W 0.25 3.4 +0-10% 30 2.3 +0-10% 20 Nm lbf · in Nm lbf · in g (oz) DC operation Mounting surface, smooth, flat and greased Not lubricated threads Lubricated threads wt Approximate weight Case style 17 (0.6) DO-203AB (DO5) See Outline Table ∆RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle 180° 120° 90° 60° 30° Sinusoidal conduction Rectangular conduction Units 0.08 0.10 0.13 0.19 0.30 0.06 0.11 0.14 0.20 0.30 K/W Conditions TJ = TJ max. Ordering Information Table Device Code 70 1 HF 2 R 3 160 4 M 5 1 - 70 = Standard device 71 = Not isolated lead 72 = Isolated lead with silicone sleeve (Red = Reverse polarity) (Blue = Normal polarity) 2 3 4 5 - HF R = Standard diode = Stud Reverse Polarity (Anode to Stud) None = Stud Normal Polarity (Cathode to Stud) Voltage code: Code x 10 = VRRM (See Voltage Ratings table) None = Stud base DO-203AB (DO-5) 1/4" 28UNF-2A M = Stud base DO-203AB (DO-5) M6 X 1 www.irf.com 3 70HF(R) Series Bulletin I20202 rev. F 01/05 Outlines Table 70HF(R) Case Style DO-203AB (DO-5) All dimensions in millimeters (inches) 71HF(R) Case Style DO-203AB (DO-5) All dimensions in millimeters (inches) 4 www.irf.com 70HF(R) Series Bulletin I20202 rev. F 01/05 Maximum Allowable Case Temperature (°C) 70HF(R) Series (100V to 1200V) R thJC (DC) = 0.45 K/W Maximum Allowable Case Temperature (°C) 180 180 170 160 70HF(R) Series (100V to 1200V) R thJC (DC) = 0.45 K/W 170 160 Conduction Angle Conduction Period 150 140 90° 130 30° 120 0 20 40 60 60° 120° 180° 80 DC 100 120 150 140 60° 30° 130 0 10 20 30 40 90° 120° 180° 70 80 50 60 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics 150 150 140 130 Fig. 2 - Current Ratings Characteristics Maximum Allowable Case Temperature (°C) 70HF(R) Series (1400V to 1600V) R thJC (DC) = 0.45 K/W Maximum Allowable Case Temperature (°C) 70HF(R) Series (1400V to 1600V) R thJC (DC) = 0.45 K/W 140 130 Conduction Angle Conduction Period 120 110 90° 100 30° 90 0 20 40 60° 120° 180° 60 80 DC 100 120 120 110 60° 30° 100 0 10 20 30 40 90° 120° 180° 70 80 50 60 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Current Ratings Characteristics 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 Conduction Angle Fig. 4 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° RMS Limit R th K/W 0.5 W K/ 0.7 1 K/ W 1. 5 W K/ SA K/W .3 =0 2K /W R elta -D 3K /W 4K /W 5 K/ W 70HF(R) Series (100V to 1200V) T = 180°C J 50 60 70 0 80 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Average Forward Current (A) Fig. 5 - Forward Power Loss Characteristics www.irf.com 5 70HF(R) Series Bulletin I20202 rev. F 01/05 120 100 80 60 40 20 0 Maximum Average Forward Power Loss (W) DC 180° 120° 90° 60° 30° R th W K/ 0.5 7 0. 1 SA W K/ K/ W W K/ .3 =0 1.5 K/ W 2K /W aR elt -D RMS Limit Conduction Period 3K /W 5 K/W 70HF(R) Series (100V to 1200V) T = 180°C J 0 20 40 60 80 100 0 120 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 Conduction Angle Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° RMS Limit R thS /W 5K 0. W K/ 7 0. 1.5 K/ W 2K /W 3K /W 4K /W 70HF(R) Series (1400V to 1600V) TJ = 150°C 50 60 70 0 80 5 K/W 25 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 7 - Forward Power Loss Characteristics 120 100 80 60 40 20 0 1 W K/ A K/W .3 =0 aR elt -D 50 75 100 125 150 Maximum Average Forward Power Loss (W) DC 180° 120° 90° 60° 30° R th 5 0. K/ W W K/ 0. 7 1 SA = 3 0. K/ W W K/ a elt -D RMS Limit Conduction Period 1.5 K/W 2K /W 3K /W R 70HF(R) Series (1400V to 1600V) T = 150°C J 0 20 40 60 80 100 5 K/W 0 120 25 50 75 100 125 150 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 8 - Forward Power Loss Characteristics 6 www.irf.com 70HF(R) Series Bulletin I20202 rev. F 01/05 Peak Half Sine Wave Forward Current (A) 1100 1000 900 800 700 600 500 400 300 1 70HF(R) Series 10 100 Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = TJ Max. @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1200 1100 1000 900 800 700 600 500 400 300 200 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = TJ Max. No Voltage Reapplied Rated VRRM Reapplied 70HF(R) Series 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 9 - Maximum Non-Repetitive Surge Current 1000 Instantaneous Forward Current (A) Fig. 10 - Maximum Non-Repetitive Surge Current 10 Steady State Value R thJC = 0.45 K/W 1 (DC Operation) 100 T = 25°C J Transient Thermal Impedance ZthJC (K/W) 0.1 10 T = T Max. J J 0.01 70HF(R) Series 0.001 0.0001 70HF(R) Series 1 0 0.5 1 1.5 2 2.5 3 0.001 0.01 0.1 1 10 Instantaneous Forward Voltage (V) Square Wave Pulse Duration (s) Fig. 11 - Forward Voltage Drop Characteristics Fig. 12 - Thermal Impedance ZthJC Characteristics Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig. 13 - Forward Voltage Drop Characteristics www.irf.com 7 70HF(R) Series Bulletin I20202 rev. F 01/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/05 8 www.irf.com