F1G93

SAW Bandpass Filter F1G93 Features US-PCS applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm ) Single-ended Operation RoHS Compliant Package Dimensions 1 6 6 1 2 I 1G93 5 5 2 3 4 4 3 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 90 - I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 1/7 SAW Bandpass Filter F1G93 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 30.0 MHz) Amplitude Ripple (In Fc +/- 30.0 MHz) VSWR (In Fc +/- 30.0 MHz) Relative Attenuation DC ~ 1500.0 MHz 1500.0 MHz ~ 1850.0 MHz 1850.0 MHz ~ 1910.0 MHz 2300.0 MHz ~ 2600.0 MHz 18.0 18.0 10.0 20.0 20.0 21.0 21.0 23.0 dB Typical 1960.0 2.3 1.0 1.9 Maximum 4.5 2.8 2.5 Unit MHz dB dBp-p Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance -30 - 25 10 50 85 - ℃ dBm Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 2/7 SAW Bandpass Filter F1G93 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 1G933) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 3/7 SAW Bandpass Filter F1G93 Typical Performance ( at 25℃ ) 29 May 2007 09:41:24 5: -2 . 5480 dB 1 960 . 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB CH1 Markers Cor 1 5 2 1: -3 . 0674 dB 1. 93000 GHz 2: -3 . 0124 dB 1. 99000 GHz 3: -37 . 930 dB 1. 85000 GHz 4 4: -16 . 123 dB 1. 91000 GHz 3 CENTER 1 960 . 000 000 MHz SPAN 600 . 000 000 MHz CH2 S21 LOG 1 dB/ REF 0 dB 29 May 2007 09:41:57 2: . 05240 dB 60. 000 000 MHz CH2 Markers mean : -2 . 4433 dB s. dev : . 26710 dB p-p : 1. 1800 dB REF=1 2 1 Cor CENTER 1 960 . 000 000 MHz SPAN 150 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 4/7 SAW Bandpass Filter F1G93 Input / Output VSWR Charts CH1 S11 SWR 1/ REF 1 29 May 2007 09:42:14 3: 1. 9261 1 960. 000 000 MHz CH1 S22 SWR 1/ REF 1 29 May 2007 09:42:29 3: 1. 7708 1 960. 000 000 MHz CH1 Markers Cor 1: 1. 5949 1. 93000 GHz 2: 2. 1082 1. 99000 GHz Cor CH1 Markers 1: 1. 5507 1. 93000 GHz 2: 1. 9026 1. 99000 GHz 3 2 1 CENTER1 960. 000 000 MHz SPAN 600. 000 000 MHz CENTER1 960. 000 000 MHz 1 3 2 SPAN 600. 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 3: 27. 770 11. 110 29 May 2007 09:42:21 902. 18 pH 1 960. 000 000 MHz CH1 S22 1 U FS 3: 29. 649 9. 1572 29 May 2007 09:42:35 743. 58 pH 1 960. 000 000 MHz CH1 Markers Cor 1: 41. 943 20. 045 1. 93000 GHz 2: 23. 798 -2 . 7725 1. 99000 GHz Cor CH1 Markers 1: 44. 965 20. 373 1. 93000 GHz 2: 27. 604 -9 . 5234 1. 99000 GHz 3 1 3 1 2 2 CENTER1 960. 000 000 MHz SPAN 600. 000 000 MHz CENTER1 960. 000 000 MHz SPAN 600. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 5/7 SAW Bandpass Filter F1G93 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape 0~15 degree Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 6/7 SAW Bandpass Filter F1G93 Carrier Tape Dimensions [unit : mm] A B C D E F 3.40 ± 0.1 3.40 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F1G93 2007-05-29 NF7005-PS01 7/7