CCM04-1316

CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided by the connector itself). The CCM04 low profile without card guidance is dedicated to applications where the overall height of the connector is paramount. A range of low profile CCM04 connectors are available with 1.25 mm thick moldings. The wide choice of contact configurations and molding heights suit a broad range of applications. Features • Available in two molding heights 1,25 mm and 2,75 mm. • The integrated card detection switch (optional) is sealed against dust and grit. • By using an inlay finish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. • The height of the contact above the insulator is 0,75 mm, allowing a wider tolerance for the card entry slot. • The contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card. • The tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted. • The contact design ensures a consistent and reliable contact force over the life of the connector. • Robustly formed printed circuit tails are well protected by the insulator body. • The moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes. • With tape and reel packaging as standard, the connectors are designed to be automatically picked & placed. Construction Contacts Plating Moldings Mechanical Data Number of Contacts Mechanical life Contact force Card detection switch actuation force Vibration 50m/s2 Shock 6, 8 50,000 cycles min 0.25 N min / 0.5 N max 0.8 N max for actuation (end travel switch actuates when card is 0,9 mm from card stop) 1.8 N max for complete depression Frequency 10 to 500 Hz. Acceleration Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Copper alloy Contact area : Gold alloy inlay Terminals : Tin lead (2µ min) High temp. thermoplastic UL 94V-0 rated Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering Code Part Number CCM04-1801 CCM04-1814 CCM04-1889 CCM04-1316 CCM04-1317 Packaging 5 reels per box. Dimensions are shown in mm Dimensions subject to change 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Normally open (closes on card insertion) 100mΩ max 250 Vrms min 1 mA min/ 10 mA max 0.2 VA -40°C to +85°C Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed IP 54 For CCM04 1889 Sealed against dust for other versions Number of Contacts 6 8 8 8 8 Card Presence Switch No No Yes Yes Yes Quantity per Reel 1800 1300 1000 700 700 www.ittcannon.com 29 CCM04 MK II Dimensional Drawings CCM04-1814 2 x 4 contacts CCM04-1814 PCB layout 0,25 ±0,05 DETAIL A 0 0,1 -0,1 (Component side) Plastic outline Contact foot area 0,8 x 1 Pad 2,54 2,54 2,54 1,5 5,5 C5 C6 C7 C8 3,81 3,81 25,5 7,79 23,2 2,5 1,5 5,5 1,8 C1 C2 C3 0,2 1,3 SEE DETAIL A Mated condition 3,81 3,81 30˚0' 25,5 ±0,2 0,8 25,5 (REF.) 1,78 (REF.) Date Code area XX-XXX 2,54 2,54 2,54 0,75 1,25 ±0,05 2,54 2,54 2,54 C4 0,3 A 1 Prohibited area Contact location according to ISO 7816-2 & ENV 1375-1 & GSM11-11 Pick and place area ø3,5 CCM04-1889 2 x 4 contacts + switch 1,78 (REF.) 8x CCM04-1889 PCB Layout 0,25 ±0,05 1,25 ±0,05 DETAIL A 0,85 30˚0' 0 -0,1 Mated condition 3,81 3,81 0 85 Plastic outline Contact foot area 0,8 x 1 Pad 5x 2,54 (Component side) 1,5 5,5 23,2 2,5 5,5 1,8 1,5 4,4 SEE DETAIL B 25,5 ±0,2 10,9 1,5 SEE DETAIL A 4,4 ±0,2 25,5 (REF.) 0,8 4,4 (REF.) 5,59 1,27 11,18 Card stop 0,9±0,25 16,2 0,95±0,2 XX-XXX Prohibited area Contact location according to ISO 7816-2 SW SW 7,99 3,81 3,81 25,5 4,4 A Date Code area 11,8 15,45 +0,10 0,75 -0,05 5,9 Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 30 10x Pick and place area ø 3,5 23,6 0,75 C5 C6 C7 C8 C1 C2 C3 C4 0,2 1,3 8x ,1 R0 CCM04 MK II Dimensional Drawings CCM04-1316 2 x 4 contacts CCM04-1316 PCB layout CCM04-1317 2 x 4 contacts + switch CCM04-1317 PCB Layout Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 31