CG105J12S105F8

C&K CG Series Single Pole Power Rocker Switches Features/Benefits • Bevelled frame • Illuminated versions available • Easy panel mount installation Typical Applications • • • • Computers and peripherals Small appliances Instrument panels Industrial controls Specifications CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC. VDE µ T85: 10 AMPS @ 250 VAC, 6 AMPS @ 250 VAC. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. Materials HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages 12 thru 14. For additional options not shown in catalog, consult Customer Service Center. Switch Function CG101 SPDT On-None-On CG102 SPST On-None-Off CG103 SPDT On-Off-On CG105 SPDT Mom-Off-Mom CG12 * SPST On-None-Off Actuator Actuator Color J1 Rocker 2 (STD). Black J2 **Two-tone rocker 1 White J3 Illuminated rocker 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 (STD.) Snap-in, black S1 Snap-in, white Termination 05 (STD.) .250” quick connect 07 Solder lug Actuator Marking (NONE) (STD.) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF Contact Rating QF (STD.) Silver Lamp Rating (NONE) (STD.) No lamp 7 125 VAC neon 8 250 VAC neon * CG12 - for switches with both marking and illumination ** J2 - refer to table on page 14 for actuator options Dimensions are shown: Inch (mm) Dimensions subject to change 12 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC CG101 CG102 SP ON NONE ON N/A ON NONE OFF 2-3 2-1 OR For Illuminated Version CG103 ON OFF ON OPEN CG105 MOM OFF MOM CG12 * ON NONE OFF * CG12 - for switches with both marking and illumination ACTUATOR J1 J3 ROCKER ILLUMINATED ROCKER J2 TWO-TONE ROCKER NOTE: J3 actuator available with CG102 switch function only. NOTE: Available with CG102 switch function only. Dimensions are shown: Inch (mm) Dimensions subject to change 13 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches ACTUATOR COLOR OPTION CODE ACTUATOR COLOR (STD.) BLACK WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED OPTION CODE ACTUATOR COLOR BOTTOM RED BLACK WHITE WHTE RED 2 1 3 R A G TOP 1 2 3 4 5 WHITE WHITE RED BLACK BLACK J2 actuator only MOUNTING STYLE/COLOR S2 S1 (STD.) SNAP-IN, BLACK SNAP-IN, WHITE PANEL MOUNTING PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “X” 1.087-.004 (27,6-0,1) 1.094-.004 (27,8-0,1) 1.102-.004 (28,0-0,1) “Y” 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1) TERMINATION 05 (STD.) .250” QUICK CONNECT 07 SOLDER LUG .886 (22,5) 1 2 3 .118 (3,0) R .049 (1,2) .031 (0,8) .366 (9,3) .250 (6,3) .535 (13,6) R .039 (1,0) Dimensions are shown: Inch (mm) Dimensions subject to change 14 www.ittcannon.com C&K CG Series Single Pole Power Rocker Switches ACTUATOR MARKING NONE (STD.) NO MARKING D ON-OFF H Ol P O- NOTE: Orientation of actuator marking and terminals. CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL SILVER POWER RATINGS 16 AMPS @ 125 VAC; 10 AMPS @ 250 VAC (UL/CSA) 10 AMPS @ 250 VAC (VDE) µ T85. QF (STD.) LAMP RATING (NONE) (STD.) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON NOTE: Lamp rating for J3 actuator option. Dimensions are shown: Inch (mm) Dimensions subject to change 15 www.ittcannon.com