GT12MAVBE

C&K GT Series Sealed Ultraminiature Toggle Switches Features/Benefits • Sealed against solder and cleaning process contaminants Typical Applications • Hand-held telecommunications • Small instrumentation • Ultraminiature size, smallest footprint available • Thru-hole and surface mount models • High temperature materials (UL 94V-0) • RoHS compliant and compatible Specifications CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max. MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 50 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). PACKAGING: Surface mount switches shipped in anti-static tape and reel packaging per EIA 481-3, see page G-48 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center. Materials HOUSING AND BASE: Glass filled nylon 6/6 or 4/6, flame retardant, heat stabilized (UL 94V-0). ACTUATOR: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0), with standard internal o-ring seal. SWITCH SUPPORT: Brass, tin plated. MOVABLE CONTACTS: Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS: Copper alloy, with gold plate over nickel plate. TERMINALS: Gold. TERMINAL SEAL: Epoxy. All terminals insert molded. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Complete part numbers for GT Series Sealed Ultraminiature Toggle Switches are shown on pages G–43 thru G–48. SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER .100 (2,54) .150 (3,81) C&K MARKING ON .015 TYP. (0,38) OPPOSITE SIDE .100 (2,54) 6 4 .170 DIA. .066 DIA. .063 (1,60) .020 TYP. (0,51) .177 (4,50) EPOXY SEAL .160 (4,06) ON ON 2-3 NONE OFF OPEN ON ON 2-1 GT11MCBE SPDT GT11MCBE GT13MCBE Conn. Terms. Schematic 3 2 1 .276 (7,01) SPDT Note: Pins 4 and 6 not connected OFF OPEN NONE N/A ON 3-1 GT12MCBE Conn. Terms. Schematic .228 (5,79) .130 TYP. (3,30) ACTUATOR SHOWN IN POS. 1 TERMINAL NOS. FOR PC MOUNTING REFERENCE ONLY 6 4 3 1 SPST Note: Pins 4 and 6 not connected GT12-omit hole 2. GT12 MODEL G Toggle TERMINALS 1,3,4 & 6 ONLY Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–43 www.ittcannon.com C&K GT Series Sealed Ultraminiature Toggle Switches .100 (2,54) .150 (3,81) C&K MARKING ON OPPOSITE SIDE .015 TYP. (0,38) .100 (2,54) 6 5 4 .177 (4,50) EPOXY SEAL SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER .160 (4,06) 3 2 1 .276 (7,01) .170 DIA. .066 DIA. .063 (1,60) .228 (5,79) .020 TYP. (0,51) GT21MCBE GT23MCBE Conn. Terms. Schematic ON ON 2-3, 5-6 NONE OFF OPEN ON ON 2-1, 5-4 GT21MCBE .130 TYP. (3,30) TERMINAL NOS. FOR REFERENCE ONLY 6 4 3 1 DPDT ACTUATOR SHOWN IN POS. 1 PC MOUNTING DPDT GT22MCBE Conn. Terms. Schematic OFF OPEN NONE N/A ON 3-1 GT22 MODEL TERMINALS 1,3,4 & 6 ONLY DPST GT22-omit holes 2 & 5. SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT11MABE GT13MABE Conn. Terms. Actuator Shown In Pos. 1 PC MOUNTING Schematic ON ON 2-3 NONE OFF OPEN ON ON 2-1 GT11MABE Horizontal Actuation SPDT SPDT GT12MABE Conn. Terms. GT12 Models Schematic OFF OPEN NONE N/A ON 3-1 SPST GT12-omit hole 2. SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT21MABE GT23MABE Conn. Terms. Schematic Actuator Shown In Pos. 1 PC MOUNTING ON ON 2-3, 5-6 NONE OFF OPEN ON ON 2-1, 5-4 GT21MABE Horizontal Actuation DPDT DPDT OFF OPEN NONE N/A ON 3-1, 6-4 GT22MABE Conn. Terms. Schematic G Toggle DPST GT22 Models GT22-omit holes 2 & 5. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–44 www.ittcannon.com C&K GT Series Sealed Ultraminiature Toggle Switches SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT11MAVBE GT13MAVBE Conn. Terms. Schematic ON ON 2-3 NONE OFF OPEN ON ON 2-1 GT11MAVBE Vertical Actuation SPDT Actuator Shown In Pos. 1 OFF OPEN NONE N/A ON 3-1 PC MOUNTING GT12 omit hole 2. GT12 Models GT12MAVBE Conn. Terms. Schematic SPDT SPST SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT21MAVBE GT23MAVBE Conn. Terms. ON ON 2-3, 5-6 NONE OFF OPEN ON ON 2-1, 5-4 GT21MAVBE Vertical Actuation Schematic Actuator Shown In Pos. 1 DPDT DPDT GT22MAVBE Conn. Terms. Schematic OFF OPEN NONE N/A ON 3-1, 6-4 PC MOUNTING GT22 omit holes 2 & 5. DPST GT22 Models: 1, 3, 4 & 6 terminals only. SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT11MV3BE GT11MV3BE GT13MV3BE Conn. Terms. Schematic ON ON 2-3 NONE OFF OPEN ON ON 2-1 SPDT SPDT Note: Pins 4 and 6 not connected OFF OPEN NONE N/A ON 3-1 Actuator Shown In Pos. 1 PC MOUNTING GT12 Models G Toggle GT12MV3BE Conn. Terms. Schematic SPST Note: Pins 4 and 6 not connected GT12 omit hole 2. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–45 www.ittcannon.com C&K GT Series Sealed Ultraminiature Toggle Switches SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER GT21MV3BE GT23MV3BE Conn. Terms. ON ON 2-3, 5-6 NONE OFF OPEN ON ON 2-1, 5-4 GT21MV3BE DPDT Actuator Shown In Pos. 1 GT22 Models: 1, 3, 4 & 6 terminals only. Schematic DPDT GT22MV3BE PC MOUNTING Conn. Terms. Schematic OFF OPEN NONE N/A ON 3-1, 6-4 DPST SMT .150 (3,81) .066 DIA. .273 (6,93) .276 (7,01) SWITCH FUNCTION POS.1 POS. 2 POS. 3 PART NUMBER .215 (5,46) 123 .020 TYP. (0,51) .109 (2,77) .015 X .020 TYP. (0,38) X (0,51) .050 TYP. (1,27) GT11MSABE Horizontal Actuation .200 (5,08) .053 (1,35) .340 (8,64) GT11MSABETR GT13MSABETR .100 TYP. (2,54) Conn. Terms. Schematic ON ON 2-3 NONE OFF OPEN ON ON 2-1 TERM NOS. FOR REFERENCE ONLY SPDT ACTUATOR SHOWN IN POS.1 PC MOUNTING SPDT GT12MSABETR 1 EPOXY SEAL GT12 MODEL TERMS. 1 & 3 ONLY 3 Conn. Terms. Schematic OFF OPEN NONE N/A ON 3-1 SPST Standard with tape & reel packaging, see page G-47. GT12-omit pad 2. SMT PART NUMBER SWITCH FUNCTION POS.1 POS. 2 POS. 3 GT11MSCBETR GT13MSCBETR Conn. Terms. Actuator Shown In Pos. 1 Schematic ON ON 2-3 NONE OFF OPEN ON ON 2-1 GT11MSCBE PC MOUNTING SPDT Note: Pins 4 and 6 not connected OFF OPEN NONE N/A ON 3-1 SPDT GT12MSCBETR Conn. Terms. Schematic GT12 Models GT12-omit pad 2. G Toggle SPST Note: Pins 4 and 6 not connected Standard with tape & reel packaging, see page G-47. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–46 www.ittcannon.com C&K GT Series Sealed Ultraminiature Toggle Switches SMT PART NUMBER SWITCH FUNCTION POS.1 POS. 2 POS. 3 GT21MSCBETR GT23MSCBETR Conn. Terms. ON ON 2-3, 5-6 NONE OFF OPEN ON ON 2-1, 5-4 Actuator Shown In Pos. 1 GT21MSCBE Schematic PC MOUNTING DPDT DPDT GT22MSCBETR Conn. Terms. Schematic OFF OPEN NONE N/A ON 3-1, 6-4 GT22 Models DPST Standard with tape & reel packaging, see page G–47. GT22-omit pads 2 & 5. TAPE & REEL For part numbers GT11MSABE, GT12MSABE, GT13MSABE REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE QUANTITY PER REEL 13.00 (330,0) .512 (13,0) 600 For part numbers GT11MSCBE, GT12MSCBE, GT13MSCBE, GT21MSCBE, GT22MSCBE, GT23MSCBE, REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE 13.00 (330,0) .512 (13,0) 200 G Toggle QUANTITY PER REEL Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–47 www.ittcannon.com